Flush for 2 days then Harvesting weekend .

Has a peper smell and taste was amazing

Girls are looking great so far! I added about 2ml/g to the reservoir and the plants responded well. Got a good explosion of growth over the last few days. I was able to start LST training the largest of the 4 today and the other 3 will be a day or 2 until they will be ready to start LST. Had some Ph issues during week 4 because my pen decided to go wonky. I tried to calibrate it again and had a hard time. So I busted out an older one and decided to calibrate it and see if it worked still... calibrated in a few min and sure enough res ph was well bellow 5. So water was changed as it was time anyway and ph’d proper just before lights out so we will see what happens tomorrow.

Week 3 going well so far. Done a bit of lst to her but not much. Week 4 fead her with 25ml off grow auto from living Soils.

12/24 week 13 Last week for Maggie , no more water to dry her out before harvest likely the 26th Tricones are ready and frankly the plant is on her last legs hardly a green leaf left above about the 50% line. Pics uploaded 12/27 She still drying out, that last was a good soaking. Chomping at the bit here got a Test grow waiting on her.

Start of Week 7! Day 44 - 12/12 Looks like I guessed right with the seed swap because this girl has clearly shown she's the LSD-25 this past week. Very excited for my first purple plant since I wasn't able to pull much purple out of my Chocolate Mint OG in my first grow. Glad I have 2 more seeds of this strain so I can give them a better chance at growing up before flower in a future grow. Maf' looks like a Solo Cup Challenge in a 5gal pot 😅 Adjusted the LST and clipped two fan leaves between the top nodes to give the secondary sites a bit more light (Not shown in Day 44 pics) Fed with the same PH Perfect MGB/Molasses mix but upped the MGB to .75ml a gal split between the 3 plants I have going now and given a water chaser to keep the top layer clean from build up. Day 48 - 12/16 Gave another wash out feeding with gallon and a half of Water/Molasses mix split between the LSD and two Cali Snows. Also added D-Earth as a preventative measure on the soil since they're starting to form buds. Trying to avoid any future harmful chems or oils on the flowers if some little buggers decide to move in plus it kind of adds silica when you water it in. Pulled the plants out for a good look and slight LST adjustment. Not much to do on the LSD-25 since she set flower early and the size/structure is locked in. Can only lean and spread to try and get the small amount of bud sites to fatten as much as possible. It is very exciting to watch the purple starting to form in the buds and leaves. She won't be big but I'll try and make her pretty fo sure 😈 Not too much smell to her yet but it could also be due to the fact that the Cali Snows I have are starting to get their stank on and probably overpowering anything the LSD is throwing out. Day 50 - 12/18 Biggest feed so far! Split 1.5ml each of PH Perfect MGB kit and 2 tsp across 2 gallons of feeding solution. LSD-25 got 0.5ml each + 1tsp Molasses and chased with a couple more litres (You imperial American's got me all messed up on this site) Will give a day to dry a bit before giving the top layer of soil a spray down with water to get rid of any residue then top with a D-Earth sprinkle and let sit until it's time for another feed. This is the fun phase of having to take pictures every day or else you don't notice just how big the buds are starting to get day by day! Might be able to get an early chop and dry for some uncured taste testing before New Years depending on how long I let her go to maximize bud size on such a small girl 😛 Thanks for stopping in, throw down a like so I can return the favour, will update through the week! 🙌 IG: @GlazedGrow

Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 (NEW) STRIVE NUTRIENTS 💪 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Questo gorilla glu. Non ho fatto un diario , perché doveva farlo un altra persona.,......

Day 36F She was a late bloomer 😉 happy to finally see some growth and bud development on her. She's taking a sweet smell still, like a fruit not quite watermelon sweet yet. Day39F - flourishing, buds swelling up and getting denser by the day now. Colours coming on now, still a very light green in Comparison to the others in the tent.

12/15: Some plants are taking too long to transition and stretching beyond my space constraints, so I dialed the photoperiod back to 12/12. 12/16: Fed today and rotated edge plants. Added another 150w of 3000k below the canopy. 12/17: Worked on ventilation...no A/C necessary now, as I'm using another AC Infinity 6" fan to intake outdoor air into the closet whenever temps reach 75f..and it's been cold as hell outside.👍 The final trick will be to replace the 6" exhaust fan with an 8" so as to be able to fully exchange the closet air faster ...but that's gonna have to wait til next season.

.

Well well well, she is coming along nicely but the nugs seem smaller than the 2 previous pheno's im hoping they build nicely and form big cola's but obvs will have to wait and see. I seem to have trouble getting those arm sized cola's i see on youtube. maybe its the strain or am i doing something wrong? Also i see a lot of people with massive stems that look so fat... mine dont seem to get as thick, is there something i can do better?

Eagle Star LED USA Large Stock LED Grow Lights Top Manufacturer Since 2010 Full Spectrum Best Led Grow Lights ESF8800 880W UV+IR Spectrum Tunable Timer Dimmable LCD Display Full Spectrum Foldable LED Grow Light Web: https://eaglestarled.com/

Hi all👨‍🌾👋 Welcome to my another week update Hope everyone keeping well 🧑‍🌾 Week 5 Mar 1 - Mar 7 What a joyful grow. Both girls are almost like twins. Super healthy and strong. Girls are in pre-flower and going head to head in development. Not expecting them to grow super tall but time will show. Considering to let them grow freely and not installing scrog net. This idea may change in coming days. 2 waterings of 2.5 l on Mar 2+ foliar feeding and second in Mar 7. May take another week before first runoff experience. Continously leaves tucking. Girls are responding perfectly to feeding like also to my LST. I am very happy and excited of what's to come 😁🧑‍🌾 Wishing you all a wonderful rest of the week✨🍀 Much appreciate all your likes, follows and comments. 🙏💚❤️💜 Peace and love brothers and sisters 👨‍🌾✌️💚 Stay tuned for new week update soon Links https://2fast4buds.com/seeds/TROPICANA-COOKIES-AUTO https://www.biobizz.com/ https://fishheadfarms.com/

First week of full flower, clear budsites and she’s stretch good! LST is really keeping all budsites relatively same size and all getting super purple/black

Flowering day 63 since time change to 12/12 h. Hey everyone 😀. Both phenotypes continue to develop very nicely :-). The buds begin to ripen and smell very tasty 😍. The trichomes are 70% milky, 15% amber and 15% clear. As soon as the next 7-12 days are 70% milky and 30% amber, I will harvest. That's why I start flushing tomorrow 👍. It was watered twice this week with 1.2 l per watering per plant. The tent was cleaned and everything checked for health 👍. We'll see you again next week :-) Until then, I wish you and your families a Merry Christmas 👍😀🙏🏻. Stay healthy and let it grow 🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .