All done with the growing, now time for the long arduous harvest 😸🤦‍♂️🤷‍♂️✨. Started the harvest on day 63 of flower, I’ve not just checked their trichomes with a loop or anything, but I’m happy with how they look. The smell is very intense. Slightly worrying in all honesty 👀 filter is really struggling, contemplating getting out my spare extractor fan&filter just while it all drys. Maybe two filters will scrub the smell completely. It’s a lovely smell, Sour Tangy Sherb, but now an extremely heavy gassy wall of smell has permeated everything. Pretty much all the buds have turned purple, just a few of the lowers are a pale green, but that’s to be expected. I’m in the process of cutting them all up into individual branches, giving them a quick wet trim, then hanging them on hangers. I’m aiming for around 10 days drying, then a final trim and into jars for curing. This was the final run of the MotorOG, it’s been a fun strain to run 😸 another decent one from LIT Farms. I’d like to thank everyone who’s taken the time to have a look, comment or like this diary, I hope it’s been helpful in some way. PersonalSmok3s 😸🌱💚

Ms Mia Wallace went to town and blew the f up. Lots of leaf growth but no sign of bud spots- I know it’s early days tho. Watered with half serving of bloom nutes. Not the ideal nute mix I think, but served me well last grow. Also, as I turned up the light to max power, I noticed heat stress so i turned it down and successfully installed the worlds most eco friendly trellis - one minute- hockey net - next minute - weed trellis. It’s called upcycling boys and girls. I know it’s shit, I’m gonna reinstall it one more 1/4 ass so it’s a full half-ass scrog. Point is, the canopy is flat, pushed that puppy down so there’s more distance. Light back to 100%. Humidity was a little higher under the canopy, even with the dehumidifier, so I put my inline fan back in (was just a booster in-line fan before) and the temp and humidity is dropping. Saw a little bug. Hit the top & bottom canopy layer with light neem oil spray then incecticidle soap. I saw a small critter so I put Diatomaceous Earth on a upside down Tupperware lid. Don’t know if that works. Last time I did a top coat of the stuff on top of the soil - something happened and bad nute burn. Anyone know anything about this? Finally, also tied down a bunch of branches to let the light hit the lower areas. Tune in next time, where I’ll show you how to make a trellis from a pair of spandex Leggings , Peanut butter and a single streamer from the handlebars of a kids bicycle. Keep your buds green, and your grow room clean.

Started low stress training on June 29th in the first video. Second video is July 1st she grew quite a bit since adjusting the stakes. Really looking forward to her training seeing how big she can get.

Taking a heavy heat wave in my area... so my girls are beeing cooked alive I hate to see them like this... I already added more CO2 to help them compensate a bit. Well the clones are beeing flushed for almost 5 days now in 4-6 days im gonna put them into 48 h darkness and harvest wish me the best =) Trichomes are looking evenly brownish all over the plants now just like I love them :P Also trying out the Clean fruits for flushing will see what it can do for me=)

Week 11 I though she was gonna be done this week only gave her RO water for the last 2 weeks but looking through the loop her trichomes are still mostly clear so I think I'll give her one more week. She looking great, smelling great, buds look amazing. Tried to get some good video so you can see how lovely she is!!

Hey everyone ☺️. This week the food was increased to 4 ml per liter of water, as they can still tolerate a little more. I'm curious how it will develop this week. Otherwise there is not really anything to tell this week ☺️. Stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at https://thecaliconnection.com/seeds/girls-scout-cookies-34.html You can buy the fertilizer at https://www.greenbuzzliquids.com/ Type: Girls Scout Cookies ☝️🏼 Genetics: GSC Tint Mint 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .

She has returned with two 2 tops Lets hope she gives me sativa dreams ! 💤 😴 She is so strong 💪 and stable im impressed with Kannabia Genetics ! I LOVE YOU KANNABIA GENETICS! 😍😘 Check out my Cannabis Community, please👇like👇, follow, comment, and subscribe to my YouTube channel👇. ❄️🌱🍻 https://www.youtube.com/@DutchF4rmer Join our cannabis community community for weekly giveaways 👌 (Discord Server) https://discord.gg/VMu6rH4a7V It will be appreciated! ❤️ Happy Growing 🌱🌱🌱

The candycane seems to be not growing too much is just seems to be packing on some weight on those buds so I don't think they're going to grow much more the heights are like this: 21.5 inch 15.5 inch. I also seem to have a problem with nitrogen deficiency possibly . They have a very light scent of a fruity sweets candy if I can describe it somehow. I will post more pictures without the grow light on so is better view of how the plant are doing . Day 45 today I feed my plants solution a little bit heavy on the nitrogen in order to try to flush out any build-up salt that could be causing a lockout or simply just i haven't water enough because I don't I like poured too much water on to them to avoid actually run out.thank you for reading I have a happy grow.

Slowly lowering the EC as we get to the end.

She's a different pheno from any Green Crack we've ever grown...very interesting looking strain... she's still under 17.5hrs and will likely stay there until she finishes .. she's looks hungrier than the rest, we'll try upping her feed a little this week..

D85/F41 - 24/06/23 - She's almost ready, I think I'll start the flush soon D86/F42 - 25/06/23 - Temp is still too high, I'm trying to refresh the environment with air conditioning D87/F43 - 26/06/23 - First Thricomes Video. I'm going to start the flush today and I'll arwest next WE D88/F44 - 27/06/23 - Flushing D89/F45 - 28/06/23 - Flushing D90/F46 - 29/06/23 - Flushing D91/F47 - 30/06/23 - She's ready. Tomorrow I'll cut her

420FASTBUDS-Week 5 Strain:FBPHP03 What up grow fam. Weekly update on these girls. Finally the weather is nice enough I transplanted them into there final 4gal pots and put them into the greenhousefor the season. Got my drip line all hooked up and so far seems like it's going good. All in all Happy Growing

Yellow butterfly came to see me the other day; that was nice. Starting to show signs of stress on the odd leaf, localized isolated blips, blemishes, who said growing up was going to be easy! Smaller leaves have less surface area for stomata to occupy, so the stomata are packed more densely to maintain adequate gas exchange. Smaller leaves might have higher stomatal density to compensate for their smaller size, potentially maximizing carbon uptake and minimizing water loss. Environmental conditions like light intensity and water availability can influence stomatal density, and these factors can affect leaf size as well. Leaf development involves cell division and expansion, and stomatal differentiation is sensitive to these processes. In essence, the smaller leaf size can lead to a higher stomatal density due to the constraints of available space and the need to optimize gas exchange for photosynthesis and transpiration. In the long term, UV-B radiation can lead to more complex changes in stomatal morphology, including effects on both stomatal density and size, potentially impacting carbon sequestration and water use. In essence, UV-B can be a double-edged sword for stomata: It can induce stomatal closure and potentially reduce stomatal size, but it may also trigger an increase in stomatal density as a compensatory mechanism. It is generally more efficient for gas exchange to have smaller leaves with a higher stomatal density, rather than large leaves with lower stomatal density. This is because smaller stomata can facilitate faster gas exchange due to shorter diffusion pathways, even though they may have the same total pore area as fewer, larger stomata. Leaf size tends to decrease in colder climates to reduce heat loss, while larger leaves are more common in warmer, humid environments. Plants in arid regions often develop smaller leaves with a thicker cuticle and/or hairs to minimize water loss through transpiration. Conversely, plants in wet environments may have larger leaves and drip tips to facilitate water runoff. Leaf size and shape can vary based on light availability. For example, leaves in shaded areas may be larger and thinner to maximize light absorption. Leaf mass per area (LMA) can be higher in stressful environments with limited nutrients, indicating a greater investment in structural components for protection and critical resource conservation. Wind speed, humidity, and soil conditions can also influence leaf morphology, leading to variations in leaf shape, size, and surface characteristics. Small leaves: Reduce water loss in arid or cold climates. Environmental conditions significantly affect gene expression in plants. Plants are sessile organisms, meaning they cannot move to escape unfavorable conditions, so they rely on gene expression to adapt to their surroundings. Environmental factors like light, temperature, water, and nutrient availability can trigger changes in gene expression, allowing plants to respond to and survive in diverse environments. Depending on the environment a young seedling encounters, the developmental program following seed germination could be skotomorphogenesis in the dark or photomorphogenesis in the light. Light signals are interpreted by a repertoire of photoreceptors followed by sophisticated gene expression networks, eventually resulting in developmental changes. The expression and functions of photoreceptors and key signaling molecules are highly coordinated and regulated at multiple levels of the central dogma in molecular biology. Light activates gene expression through the actions of positive transcriptional regulators and the relaxation of chromatin by histone acetylation. Small regulatory RNAs help attenuate the expression of light-responsive genes. Alternative splicing, protein phosphorylation/dephosphorylation, the formation of diverse transcriptional complexes, and selective protein degradation all contribute to proteome diversity and change the functions of individual proteins. Photomorphogenesis, the light-driven developmental changes in plants, significantly impacts gene expression. It involves a cascade of events where light signals, perceived by photoreceptors, trigger changes in gene expression patterns, ultimately leading to the development of a plant in response to its light environment. Genes are expressed, not dictated! While having the potential to encode proteins, genes are not automatically and constantly active. Instead, their expression (the process of turning them into proteins) is carefully regulated by the cell, responding to internal and external signals. This means that genes can be "turned on" or "turned off," and the level of expression can be adjusted, depending on the cell's needs and the surrounding environment. In plants, genes are not simply "on" or "off" but rather their expression is carefully regulated based on various factors, including the cell type, developmental stage, and environmental conditions. This means that while all cells in a plant contain the same genetic information (the same genes), different cells will express different subsets of those genes at different times. This regulation is crucial for the proper functioning and development of the plant. When a green plant is exposed to red light, much of the red light is absorbed, but some is also reflected back. The reflected red light, along with any blue light reflected from other parts of the plant, can be perceived by our eyes as purple. Carotenoids absorb light in blue-green region of the visible spectrum, complementing chlorophyll's absorption in the red region. They safeguard the photosynthetic machinery from excessive light by activating singlet oxygen, an oxidant formed during photosynthesis. Carotenoids also quench triplet chlorophyll, which can negatively affect photosynthesis, and scavenge reactive oxygen species (ROS) that can damage cellular proteins. Additionally, carotenoid derivatives signal plant development and responses to environmental cues. They serve as precursors for the biosynthesis of phytohormones such as abscisic acid () and strigolactones (SLs). These pigments are responsible for the orange, red, and yellow hues of fruits and vegetables, while acting as free scavengers to protect plants during photosynthesis. Singlet oxygen (¹O₂) is an electronically excited state of molecular oxygen (O₂). Singlet oxygen is produced as a byproduct during photosynthesis, primarily within the photosystem II (PSII) reaction center and light-harvesting antenna complex. This occurs when excess energy from excited chlorophyll molecules is transferred to molecular oxygen. While singlet oxygen can cause oxidative damage, plants have mechanisms to manage its production and mitigate its harmful effects. Singlet oxygen (¹O₂) is considered a reactive oxygen species (ROS). It's a form of oxygen with higher energy and reactivity compared to the more common triplet oxygen found in its ground state. Singlet oxygen is generated both in biological systems, such as during photosynthesis in plants, and in cellular processes, and through chemical and photochemical reactions. While singlet oxygen is a ROS, it's important to note that it differs from other ROS like superoxide (O₂⁻), hydrogen peroxide (H₂O₂), and hydroxyl radicals (OH) in its formation, reactivity, and specific biological roles. Non-photochemical quenching (NPQ) protects plants from damage caused by reactive oxygen species (ROS) by dissipating excess light energy as heat. This process reduces the overexcitation of photosynthetic pigments, which can lead to the production of ROS, thus mitigating the potential for photodamage. Zeaxanthin, a carotenoid pigment, plays a crucial role in photoprotection in plants by both enhancing non-photochemical quenching (NPQ) and scavenging reactive oxygen species (ROS). In high-light conditions, zeaxanthin is synthesized from violaxanthin through the xanthophyll cycle, and this zeaxanthin then facilitates heat dissipation of excess light energy (NPQ) and quenches harmful ROS. The Issue of Singlet Oxygen!! ROS Formation: Blue light, with its higher energy photons, can promote the formation of reactive oxygen species (ROS), including singlet oxygen, within the plant. Potential Damage: High levels of ROS can damage cellular components, including proteins, lipids, and DNA, potentially impacting plant health and productivity. Balancing Act: A balanced spectrum of light, including both blue and red light, is crucial for mitigating the harmful effects of excessive blue light and promoting optimal plant growth and stress tolerance. The Importance of Red Light: Red light (especially far-red) can help to mitigate the negative effects of excessive blue light by: Balancing the Photoreceptor Response: Red light can influence the activity of photoreceptors like phytochrome, which are involved in regulating plant responses to different light wavelengths. Enhancing Antioxidant Production: Red and blue light can stimulate the production of antioxidants, which help to neutralize ROS and protect the plant from oxidative damage. Optimizing Photosynthesis: Red light is efficiently used in photosynthesis, and its combination with blue light can lead to increased photosynthetic efficiency and biomass production. In controlled environments like greenhouses and vertical farms, optimizing the ratio of blue and red light is a key strategy for promoting healthy plant growth and yield. Understanding the interplay between blue light signaling, ROS production, and antioxidant defense mechanisms can inform breeding programs and biotechnological interventions aimed at improving plant stress resistance. In summary, while blue light is essential for plant development and photosynthesis, it's crucial to balance it with other light wavelengths, particularly red light, to prevent excessive ROS formation and promote overall plant health. Oxidative damage in plants occurs when there's an imbalance between the production of reactive oxygen species (ROS) and the plant's ability to neutralize them, leading to cellular damage. This imbalance, known as oxidative stress, can result from various environmental stressors, affecting plant growth, development, and overall productivity. Causes of Oxidative Damage: Abiotic stresses: These include extreme temperatures (heat and cold), drought, salinity, heavy metal toxicity, and excessive light. Biotic stresses: Pathogen attacks and insect infestations can also trigger oxidative stress. Metabolic processes: Normal cellular activities, particularly in chloroplasts, mitochondria, and peroxisomes, can generate ROS as byproducts. Certain chlorophyll biosynthesis intermediates can produce singlet oxygen (1O2), a potent ROS, leading to oxidative damage. ROS can damage lipids (lipid peroxidation), proteins, carbohydrates, and nucleic acids (DNA). Oxidative stress can compromise the integrity of cell membranes, affecting their function and permeability. Oxidative damage can interfere with essential cellular functions, including photosynthesis, respiration, and signal transduction. In severe cases, oxidative stress can trigger programmed cell death (apoptosis). Oxidative damage can lead to stunted growth, reduced biomass, and lower crop yields. Plants have evolved intricate antioxidant defense systems to counteract oxidative stress. These include: Enzymes like superoxide dismutase (SOD), catalase (CAT), and various peroxidases scavenge ROS and neutralize their damaging effects. Antioxidant molecules like glutathione, ascorbic acid (vitamin C), C60 fullerene, and carotenoids directly neutralize ROS. Developing plant varieties with gene expression focused on enhanced antioxidant capacity and stress tolerance is crucial. Optimizing irrigation, fertilization, and other management practices can help minimize stress and oxidative damage. Applying antioxidant compounds or elicitors can help plants cope with oxidative stress. Introducing genes for enhanced antioxidant enzymes or stress-related proteins over generations. Phytohormones, also known as plant hormones, are a group of naturally occurring organic compounds that regulate plant growth, development, and various physiological processes. The five major classes of phytohormones are: auxins, gibberellins, cytokinins, ethylene, and abscisic acid. In addition to these, other phytohormones like brassinosteroids, jasmonates, and salicylates also play significant roles. Here's a breakdown of the key phytohormones: Auxins: Primarily involved in cell elongation, root initiation, and apical dominance. Gibberellins: Promote stem elongation, seed germination, and flowering. Cytokinins: Stimulate cell division and differentiation, and delay leaf senescence. Ethylene: Regulates fruit ripening, leaf abscission, and senescence. Abscisic acid (ABA): Plays a role in seed dormancy, stomatal closure, and stress responses. Brassinosteroids: Involved in cell elongation, division, and stress responses. Jasmonates: Regulate plant defense against pathogens and herbivores, as well as other processes. Salicylic acid: Plays a role in plant defense against pathogens. 1. Red and Far-Red Light (Phytochromes): Red light: Primarily activates the phytochrome system, converting it to its active form (Pfr), which promotes processes like stem elongation and flowering. Far-red light: Inhibits the phytochrome system by converting the active Pfr form back to the inactive Pr form. This can trigger shade avoidance responses and inhibit germination. Phytohormones: Red and far-red light regulate phytohormones like auxin and gibberellins, which are involved in stem elongation and other growth processes. 2. Blue Light (Cryptochromes and Phototropins): Blue light: Activates cryptochromes and phototropins, which are involved in various processes like stomatal opening, seedling de-etiolation, and phototropism (growth towards light). Phytohormones: Blue light affects auxin levels, influencing stem growth, and also impacts other phytohormones involved in these processes. Example: Blue light can promote vegetative growth and can interact with red light to promote flowering. 3. UV-B Light (UV-B Receptors): UV-B light: Perceived by UVR8 receptors, it can affect plant growth and development and has roles in stress responses, like UV protection. Phytohormones: UV-B light can influence phytohormones involved in stress responses, potentially affecting growth and development. 4. Other Colors: Green light: Plants are generally less sensitive to green light, as chlorophyll reflects it. Other wavelengths: While less studied, other wavelengths can also influence plant growth and development through interactions with different photoreceptors and phytohormones. Key Points: Cross-Signaling: Plants often experience a mix of light wavelengths, leading to complex interactions between different photoreceptors and phytohormones. Species Variability: The precise effects of light color on phytohormones can vary between different plant species. Hormonal Interactions: Phytohormones don't act in isolation; their interactions and interplay with other phytohormones and environmental signals are critical for plant responses. The spectral ratio of light (the composition of different colors of light) significantly influences a plant's hormonal balance. Different wavelengths of light are perceived by specific photoreceptors in plants, which in turn regulate the production and activity of various plant hormones (phytohormones). These hormones then control a wide range of developmental processes.

D46 - The first day in the third week of flower. Not much to report. I'm pretty much just letting her go at this point, considering how stunted she is. I'm interested in what the result will be but I'm not really willing to spend much time or energy on her. D48 - I'm starting to see more discolored leaves on her, and I suspect that she has thrips considering that I had (have?) them in my other tent. I can't spray her with anything as she is in flower, and I already have a bag with predatory mites on her, so I've done what I can really can. In any case, she is more of a project at this point. The good news is that I think I have discovered why she is stunted. I read online about transplanting when they mentioned that it was important not to transplant when the plant is too dry, as it can cause the root structure to fall apart and thus shock your plant. Well, that is precisely what happened. During the transplant, my girl was dry and lost some earth, which disturbed the roots. 100% user error, as I suspected since this was my first time transplanting. Usually, I plant directly in the final container. I need more training (obviously), so I have started a new grow where I plan to transplant the girls a couple of times. D52 - The end of yet another week. She is getting frosty but is of course still stunted and tiny lol.

Going into week 9. Weirdo stopped dying back and pumped out another set of bracts. I guess she has time, maybe this week. I just dont know anymore.. Plant 2 has atleast another week, stacking buds well. Increase in mass is apparent now as the buds sway in the wind. Something must have happened for weirdo to die back like that. Not quite sure at this point as I haven't changed anything in a few weeks. Maybe a little pk boost. Looks like the symptoms I had when the plants suffered a drought but my system has been operational the entire time, as far as I know. I'll update if weirdo gets the axe this week, but I'd rather pull them together if I can.

Battling with spider mites at this stage. I am trying to keep them at bay using different methods. Neem oil spray, garlic and mint spray, pain water sprays. I also fed some fungal tea I brewed for 72 hours.

🔄 Looking back: Mimosa Evo #3 (Day 0 of flower) is still doing well overall, but continues to show signs of overfeeding 🚫 She doesn't seem very hungry, so I’ll lower the EC further – aiming for around 0.8 or maybe even 0.7. 🕒 Flowering begins: This week I flipped Mimosa Evo #3 to 12/12! Stretch is just around the corner 🌿📏 Really curious to see how much she'll take off in the next days – it’s getting exciting now!