Update 20 Jan 2021 - Well starting the cure a bit earlier than I’d like cause I’m having issues getting the humidity up so she dried up quick. Working on rehydrating her a bit and have her in mason jars now. Ended of with 88 grams of rock solid buds. Still want it to rehydrate and cure a bit before trying her out. What can I say, a very simple and easy grow. Had absolutely no issues during the grow and ended up with 380 grams of SOLID wet bud. Even some of the lower buds that didn’t get much light are pretty rock solid. Going by the smell and solidness of the buds, I got a feeling this is gonna be a too 2 strain, if not number 1. Looking forward to growing this one again and as soon as I harvest another plant, I’ll probably start another one of these.

we begging week 5 and the flowers are getting bigger and bigger These Strain is the fastest on these test , and the dark colors are begging to take over the plant . the second one is a weel younger but also getting fast really frosty

11/13 Was the last night I kept the dome in the tent, started getting too crowded! But here on 11/15....lol i got bored and wanted to give it some more nutes! 😏 So I made a gallon up of some warm tap water PH'd down to 6.1, 8ml of FoxFarms Big Bloom, 5ml Boomerang, 5ml Wholly Mackerel, and 2ml of Power Si followed up with a very low dosed foliar spray of Xtreme Gardening's CalCarb before it was lights out. 11/17 I did some topping including the main stem. In the video (its off my Instagram story @SoilBGood) there's one that I'm not too happy about, the taller one with the stretched out spacing. But I don't doubt that its gonna give me some dank buds 👊 11/20 The plants are looking sharp....I foliar fed them with some Calmag / Power Si and they blew up over night lol B: Is a shot of the node growth NOTE: I ALWAYS DEFOLIATE EVEN IF I FORGET TO MENTION IT. NOTE NOTE: I swear I smell them already :D

I started germination of 2 Moon Walker kush beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up.h Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! Some background information on my first run with MWK. She gets very branchy fast and absolutely loves lst. Responded everytime with a vigorous growth spurt after training sessions. Very easy going on nutrients and didnt have any different needs outside my normal feeding schedule. Super tight compact colas in definite need of increased air flow and movement. Ended up having the fans turned up much higher in the room she was in because of the shear mass and density. Super trichome production outta these genetics. One of the frostiest strains I've grown to date. Just diamonds!!! Amped for this second run.

At the beginning of week 11 they both look strong and healthy to me. Though their buds still seem smaller than the one in the 20l pot. But the look great after all :) So colorful and frosty (the smaller one) and so big and yellow (the taller one). Can't wait to harvest them :D At the middle of week 11 they both still look great and I think I saw the tall one's buds grow a bit again... There was something strange going on at the top of the head bud (of the taller one). There'S a close up picture... I guess it's just a kind of mutation and no seed. I was shocked first when I thought it was a seed...

Let's start the journey 💪🏻 11/08/24 Just water for now 💦

Hola a todos! Espero que anden bien!!.. Les comento que hice esta semana, la he regado con agua un riego y el último hoy, con nutrientes en sus dosis indicadas más arriba. La planta ha crecido mucho esta semana 37cm en 7 días, ha pegado el estirón, y también han mostrado sus preflores. Esta semana he tenido una humedad alta 70% y no la he podido bajar,pero con humedad y una temperatura que ha rozado los 28 grados por momentos, he notado que las plantas les gusta ese ambiente, por eso el crecimiento que ha pegado. Hoy (17/09 ) ,dia 35, de la Auto Divine Rapier he quitado las hojas más grandes que tapaban las ramas bajas, espero que en este momento no estrese la planta. Bueno, no los aburro más, nos vemos la próxima semana!. Buenos humos!! Las imágenes corresponden al periodo del 10/09 hasta el 17/09 (dia 35) inclusive.

to be updated soon

Chibans are pollinated as everything in the room was. I will still finish them off and hope for some passable bud. I may even end up with some Sherbert banana beans...🤞🤘

so its currently day 42 end of week 5 (start of week 6) but we are still currently in veg with no pistils or signs of flower little concerned i know she isnt male because the little pointy bits where the pistils for first sex signs come from are shaped with a point so i believe these are females? also the delay in flower maybe genetics or just down to the stress from lst and topping and constant defol im having to do as she is a fast grower cant keep the shoots of her mainlines, so this maybe the key factor here however due to my tent size etc im considering switching lighting to 12/12 to force flower but no this will impact yield for auto. so my dilemma is wait another week to 10 days taking her into 7.5 weeks veg hoping she flowers in between or before then or flip her into flower myself with bloom nuits and light change with as little stress as poss by adding extra shade hours to the start of her night cycle 🙏

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

OG 4Q24 Seedling Bolt III Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Dec 25, 2024 CR2 4Q24 1:B:1:1] End of Week: [Tue Dec 31 , 2024 CR2 4Q24 7:B:1:7] OrangeGasm Fertigation: Max EC: [ 2.4, mS] _______________________________________ Week’s Objectives: - IFF We’re still HAND WATERING, ADD First Resin Bloom to Full @ 4ml/gal. - We can’t replace RLA’s Carbon Component with/out ~300 ml/Gal Ful-Power (Fulvic Acids) We WON’T be doing that. Rather, we’ll see a diminution of Carbon provided, look for 3-5 days to stabilize after switch to auto-irrigation. EC Starting Water: ec: 0.0 mS/cm, pH: ~7  __ Wed Dec 25, 2024 # Christmas Day OG 4Q24 15:B:2:1 Watered late tonight (~2200). - NO RUNOFF - Barely the beginning of Burnt Tips - Grew 2” overnight - raised light 2”, Canopy Distance is 19.5 @ 77% (770 ppfd) After Watering - With REDUCED Light, Plants are FRISKY Leaves raised (but no fingers in light sockets) - # We’ve got Pistils (Noted Yesterday) - Ceasing Foliar . . . IT’s been good. ;-} Runoff: NO RUNOFF Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml]  Standardizing Lighting __ Thu Dec 26, 2024 # BOXING DAY OG 4Q24 16:B:2:2 Scotoperiod: [ 12, h] EC: [ 2.4, mS/cm] Temp: [ 79, °F] RH: [ 68, %] VPD: [ 0.85, kPa] NOTE: If we’ve no runoff today, Water AGAIN at Midnight, Install Auto-Fertigation Tomorrow Raised Light 6 Clicks - Grew 2” Overnight - Light Distance ~20” @1900 - Fertigation Fertigation: - [x] Primer A&B: [ 10.2, ml] - [x] CalMag Fuel: [ 6.8, ml] - [x] Silica Skin: [ 6.8, ml] - [x] Lush Green: [ 5.1, ml] - [x] Root Anchor: [ 5.1, ml] - [x] Peak Bloom: [ 5.1, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [~scant~] - [x] SLF-100: [ 5, ml] IPM: - [x] Zymes Bomb - Top to Bottom, including Airpot Sides.
Foliar DRENCH w/ Zymes at 1:31 water dilution. Drenched top and bottom of leaves, stems, JOINTS, Coco Top, and spraying down ALL Airpot Side Holes, and BOTTOM OF AIRPOT. Letting the girls run up to 82°F, RH @ 69%, VPD ~9. Plants are HAPPY w/ EC: 2.4, w/ Moderate High Lighting (~770) If they’re happy before lights out, and I know it - Let’s raise light to 80% (800 µMol/m2/s), adjust airflow for overnight Temp (Humidity Down). And call it a night. After Raising light to 83%, REDUCED again to 77% @0600 __ Fri Dec 27, 2024 OG 4Q24 17:B:2:3 Runoff: [ 500, ml], EC: [ 1.7, mS/cm] Raised Light 6 Clicks (Grew 1.5” Last Night). Light Distance back to ~20” 1.5 Gal fertigation - let’s do 1900 & 1200  Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] After 2:30 Feeding - Raised light to 83% __ Sat Dec 28, 2024 OG 4Q24 18:B:2:4 Temp: [ 82, °F] RH: [ 68, %] VPD: [ 0.96, kPa] Light Distance: [ 19.5, “] Fertigation: RLA Heavy, Flower Week 3; EC: 2.4 Notes: - Evaluate 83% Dimmer at Lights On - Back off to 77% if any indication of Light Stress - Let’s ramp to EC: 2.7 mS As max. Beyond here, we probably don’t have sufficient CO2. Light Intensity (IDEAL): 83% # ~830 µMol/m2/s EC: 2.4 422 ml/plant, runoff, EC 1.5. Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 14.8, ml] - [x] CalMag Fuel: [ 9.9, ml] - [x] Silica Skin: [ 9.9, ml] - [x] Lush Green: [ 7.4, ml] - [x] Root Anchor: [ 7.4, ml] - [x] Peak Bloom: [ 7.4, ml] - [x] Resin Bloom: [ 4.9, ml] - [x] Photosynthesis Plus: [ 9, ml] - [x] Quillaja 60 Powder: [ 0.125, tsp] - [x] SLF-100: [ 7.4, ml] 420 ml/plant op Crinkly LOWERS - EC Too High Too Fast? __ Sun Dec 29, 2024 OG 4Q24 19:B:2:5 EC: 2.3-2.4 The Max Hydro comes in at 2.36 EC. RLA Hydro Chart set 3.4. How Can Be? DROPPING SILICA SKIN from RLA Hydro (Eliminate Brown Patina, and Small Orifice Build-up) RLA Hydro  Nutrient Element Ratios ppm mS/cm NER N 262 0.5 21.8% P205 143 0.3 11.9% K20 476 1.0 39.7% Ca 214 0.4 17.9% Mg 48 0.1 4.0% S 57 0.1 4.8% Si 0 0.0 0.0% C 333 TOTAL 1533 2.4 100.0%  
RLA - Full - [x] Complete Irrigation Install Defoliation I We want to eliminate All Vegetation from TOPPED NODE (3) Down. - [ ] Count NODES FROM SPLIT - [x] Measure Plant Heights: 11 - 17” - [x] Remove Each Pot and Trim OUTSIDE OF TENT (Get it RIGHT!) - [x] Can we adjust the pot positioning to get ONE UNDER CANOPY Fan? - [x] Eliminate FANS and Growth tips NODES 1 - 3 (3 is TOP SPLIT) - [x] Eliminate FAN LEAVES from First Node of MAIN STEMS - [x] INSTALL DRIP RINGS (No Manifold, Yet) - [x] Apply LABEL to Each Plant - [ ] Consider Eliminating FAN LEAVES from Second Node of Mains _______ Fertigation: 1.5 Gal # 2000 & 0100, .75 gal Each, EC: 2.5 - [x] Primer A&B: [ 54.1, ml] # EC: 2.4 MAX - [x] Photosynthesis Plus: [ 24, ml] - [x] Quillaja 60 Powder: [ 0.25, tsp] - [x] SLF-100: [ 15, ml] Time Set Initiate Complete Event 1 18:45 18:45:25 Event 2 20:05:00 20:05:25 Event 3 21:25:00 21:25:25 Event 4 22:45:00 22:45:25 Event 5 00:05:00 00:05:25 Event 6 01:25:00 01:25:25 Event 7 02:45:00 02:45:25 Event 8 04:05:00 04:05:25 Event 9 05:25:00 05:25:25 CHANGED TO 25 SEC EVENT (from 20) Tuesday - / / / __ Mon Dec 30, 2024 OG 4Q24 20:B:2:6 - [x] Harvest Dehu Water Continuing to RAISE LIGHT ~ 2”/day (6 Clicks of the support ratchets). Runoff: - [ 422, ml, plant!!!!] # Reduced Event duration to 20 Seconds (from 30). - [ 1.4, mS/cm] Lowering light to 70%, see if lower fans relax. They’re electric. :-). They relaxed. Inner fans surrounding apical stems are laying @ 30°, rather than Reaching for 60°. I have perhaps been overnighting. HUMIDITY IS CRANKING. It’s impossible to get VPD above ~8.3! Trying to keep humidity below 68 drives Temp below 78. I forgot about the part. ;-( Dehumidifier is ON, Doors are Closed, Room Vent is CLOSED. Dehumidifier is delivering 50%RH to the room. Orange Gasm is quickly filling the air with moisture. At MIDNIGHT, Raised light to 77% ( ~770 µMol/m2/s] pH Adjusted 2 Gallons of Filtered Tap to pH: 7.2, EC: 0.3 (Used for Dilution when refreshing reservoir with DEHU and Fresh Supplements. __ Tue Dec 31, 2024 OG 4Q24 21:B:2:7 @0630 Took a peek in the tent. SCANT RUNOFF @ 20 Sec Feed Events. JUST Touched TIPS (Burning). Bumping Fertigation Events to 25 Seconds, after Feeding 9 * 5sec (45 Sec) To bring DAYS delivery to 25 Seconds. Check Reservoir: - We’ve 4 - 5 Gallons. @LIGHTS ON - Reset Light Height - Reduce light to 73% (See if we can avoid more tip burning) Harvest Dehu: - [x] Amount: [ 5.7, l] - [x] Primer A&B: [ 27, ml] # For EC: 2.4 mS/cm, Nailed it, First Try. ;-} Orange Gasm likes to SPREAD when Topped. - Which makes her a funny candidate for SOG. ;-} 

Recovering from her snap well :) Taken central tops for cuts, done another round of topping all round. Should end up with 15 evenly sized colas Up potted to 25L, will flip ina week or so.

Week 5 veg - clones and Week 3 - Blueberry Cupcake (Humboldt Seed Co.) and French Macaron (TH Seeds) from seed. G-41, Frosty Gelato, and Frozay Gas topped with 2 clones each taken from cuttings to propagate placed in 2x2 clone/seedling tent with low LED lighting. Temps in low 80F w/60% ROH. Clone cuttings covered with sandwich bags used as humidity domes. After taking cuttings transferred G-41, Frosty Gelato, and Frozay Gas to 3x3x6 AC Infinity tent under Mars-Hydro FC-E3000 set at 50 percent power (PPFD range for veg). Black Cherry Gas clone, Blueberry Cupcake, and French Macaron from seed remain in 2x4x5 AC Infinity under Spider Farmer SF-2000 with dimmer set at 50 percent power (PPFD range for veg). Continued twice weekly IPM foliar treatment with Organishield as well as watering soil program (SP).

Cured for 1 month, nice trichomas covering, smell good, nice THC level (not for beginners), easy to grow, long cycle, needs long term veg time.

Day 79 17/09/24 Tuesday Feed today using de-chlorinated tap water pH 6. Seeing good developments, buds forming nicely, divines are smaller denser structures but the buds are not lacking! Damn I'm surprised by 2L pots. Day 81 19/09/24 Thursday De-chlorinated tap water pH 6 only today. Day 83 21/09/24 Saturday Another feed to push this week they seem to be handling it 💚. Fattening up on the buds now and pistils starting to mature. Day 84 22/09/24 Sunday (End of week) Damn!! Noticed I have leaf rollers!!! Damn caterpillar, from moths. So I have removed affected leaves and areas and this AGAIN will affect yeilds on all plants...but I have determined the strains I will re run ! Let's hope we make it too the chop 😅💚