Likes
4
Share
@PotusArg
Follow
Durante la semana 6, las plantas continuaron con su desarrollo habitual, y la verdad es que no ha habido cambios significativos. In week 6, the plants continued their usual development, and honestly, there haven’t been any significant changes.
Likes
16
Share
@Haoss
Follow
Buds should be dried at 20 degrees in the dark at 40% humidity
Processing
Likes
5
Share
@JerMeds
Follow
We added a new member to the family yesterday a BCN Critical XXL Autoflower from SeedStockers in a 5 gallon with soil and perlite mix. He said he has been having a little trouble with temperatures being too cold but he has been figuring it out and he almost has it under control and it shows. They are all looking great. They are going to start flower soon. I think hes in for a treat. I am working on a flowering feed guide for him. He has been doing great with minimal nutrients so we will keep it that way.
Likes
108
Share
@Targona
Follow
Hello GrowDiaries friends. 72 days since my little girl sprouted from seed/harvest time🌱 Sweet Seeds breeder technical and general parameters: Red Pure Auto CBD 💚❤️💚❤️ Growing Red Pure Auto CB according to breeder: This “pure CBD” autoflowering strain is notable for its red flowers, very low THC levels (0.4–0.5%) and high CBD content (15–17%). It is a cross between two of our own strains: Sweet Pure CBD (SWS65) and Red Poison Auto (SWS39). It looks like most other indica plants with a large central bud, short side branches, a strong stem and plenty of resin. The strain offers a sweet, earthy aroma and taste, with shades of fresh pine or cypress and hints of fruits of the forest. It has a relaxing effect that washes away anxiety, which makes it ideal for medicinal users who do not want to feel any psychotropic effects from the THC 🌱🌿🌾 My experience: Throughout the growing period, the plant was very vital, it had a beautiful healthy color, strong stems. The color is beautiful, a loud purple color that extends to half of the leaves. Unfortunately, in the second week of flowering, it stopped and stopped getting stronger in the buds. They were beautifully colored, but they stopped getting thicker. Apparently, this will be my fertilizer testing and each strain and seed reacted completely differently. In the end, it had a very small harvest. I remember it like that maybe from my early days of growing. I'm very sorry about this strain, because I'm going to make a tincture from pure CBD. Fortunately, I grew two of these plants and only kept a diary for one. 💩💩 💚🌱 👍🌞 Data sheet of the strain Red Pure Auto CBD 💚❤️💚❤️ Indica: 58.4% Sativa: 40% Ruderalis: 1.6% THC: 0.4-0.5% CBD: 15-17% Ratio THC:CBD: (1:34-1:37) Indoor Yield: 450-500 g/m² Outdoor Yield: 30-100 g/plant Indoor/Outdoor Harvest: 9 weeks from germination Height: 50-90 cm Purple Flower: approximately 95% of the specimens Effects: Relaxing, Medicinal Taste: Cypress, Earthy, Pine tree, Cool, Fruits of the Forest, Sweet For growing I used: --------------------------------------- Growing tent Mammoth PRO+ 80: 80x80x180cm 1x circulation fan: 15W 🌬️ LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: duct fan - RAMTT100 🌬️ Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x Airpots 11 l I mix the substrate: Biobizz Lightmix + Perlite + Coco coir For sale here 👇👇👇👇👇👇👇👇: ⚡⚡⚡⚡⚡⚡https://sweetseeds.com/cs/semena-the-red-family/3063-red-pure-auto-cbd.html ⚡⚡⚡⚡⚡ Thanks for the likes :) See you soon 😍😍
Likes
59
Share
Song of the week : method man & redman - how high part 2 ------ 03.10 - My 2 1st try was a fail so I'm re-(re)starting with my last 4 seeds of Blue dream'matic as my 1st attempt provide me a nice smoke full of terpenes. Today 4 seeds was put into a glass of water 🤞 hope this time will be the last & the good one 🌱 ------ 05.10 - Ready to be transplant 👍 ------ 06.10 - 4 seedlings have been poted in 0.25L pots. ------ Day 6 - 12.10 - They remain small but they are far from the light , I have to make more space in the box for them so next week my Green poison xl will get out for flowerimg to clear the space. I also watered them today.
Likes
7
Share
Likes
4
Share
Journal de floraison. Me permet de garder une base de cette poly-culture en coco mix humus worm 55-45. Jai etablie un protocole de fertilisation sur 9 semaines. Si des personnes sont intéressées, je peux vous le transmettre. Rempotage le jour de mise en floraison. Semaine1: Hesi complex Flo, Hesi Supervit, Hesi Phosphor +, Hesi Boost + Madame grow accelerateur de racine et croissance, Madame Grow Lacalvastress et Atami B'Cuzz coco bloom
Processing
Likes
5
Share
JULY 26 - DAY 72 - Entering her 4th week of flower like a boss, she isn't as thirsty as her Meph counterpart but still bulking nicely JULY 28 - DAY 74 - Looking great! JULY 29 - DAY 75 - Fattening up and she looks like she can get substantially bigger, as the pistils are bright white.
Likes
8
Share
At this point the special queen and kush were sprouting, the ak-47 with 3 weeks and the critical with 1 week
Processing
Likes
23
Share
🔥🔥🔥This heatwave is killin me.🔥🔥🔥 Thank God for the rain. Set kickin myself for deciding to hand water when I have everything I need to make an automated system. Taking clones trying to decide which strains to keep. Gave my gf's son 2 of the 3 pots that I had, so I'm down to 31 total. Indoor and outdoor should finish at the same time for a 50 plants harvest in the fall.😀😀 Even if I gotta build my kid a hamster ball, I need schools to open.
Likes
16
Share
Slowly heading into flowering had to put 2 bends on too colad just to keep the canopy firm and open up the side branches ,pulled out few of the bottom leaves 🍁 so to get better air flow ,so far so good ,lets see how she’ll perform into flowering now 💚
Likes
2
Share
Won't be a big harvest from this girl, although the buds are fattening up nicely. Will stop adding PK in the next few days before getting ready to flush in the next couple of weeks. This plant is on the left of the timelapse video.
Likes
19
Share
@Mazgoth
Follow
I’m using 40L water with flawless finish and flushing with this product,let it sit for about 8/10 hours and flush one more time with only fresh water.Repeat one more time after the soil is completely dry.
Likes
31
Share
Thanks for stopping by had a bit of a hiccup last weekend left them unattended got a little heat stress but got everything back on track and now we’re pre flowering also switched nutrients and readjusted pots for better lighting. ( I’m excited for my first grow ever )
Likes
14
Share
@danwho
Follow
8/21/2024 Added two fresh gallons with week 4 nutrients to bring the reservoir up to 750ppm. Will plan to do a more substantial water change in the next few days. Both plants are booming! Added the trellis netting to begin training the plants to fill the tent! This week should be interesting. 8/24/2024 Both plants are looking good up to this point. Have continued to add fresh nutrient water as they are drinking much more now. I have a second trellis net on hand as I believe it will be required for an aditional layer of support as they stretch into pre-flower. Looking like a 4.5 or 5 week veg before flipping. 8/25/2024 Noticed Plant B water level was only a few inches in the bottom of the bucket. Had a pump flow rate issue with most of the feed from the reservoir diverting to the closer bucket. Working to rectify the issue, but Plant B is definitely stunted, unfortunately. 8/27/2024 The water level issue was remedied by putting a separate pump and feed line in place for each plant. Continuing to defoliate as I prepare to take clones. I will likely run this week of veg a few extra days to allow Plant B to recover a bit from the water issues. Additionally, after taking clones I will give 1-2 days of recovery for the plants before switching to 12-12 and starting pre-flower! 8/29/2024 Raised the lights to drop DLI to about 30. Continuing to monitor water level issues. 8/30/2024 Did a final pruning on both plants before flipping to flower tomorrow. Started topping reservoir with bloom nutrient blend. Shortened light cycle by 2 hours to not shock the plants into flower. Added a second layer of trellis netting. Plant A (larger of the two) is absolutely thriving, plant B (smaller of the two) is bouncing back from the water level issues earlier this week! Both plants are looking ready for flower.
Likes
20
Share
For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.
Likes
43
Share
@Coopmc
Follow
Man I’m so excited!! Oh yea ! A little fruitie and a bit Funky!!