Recommended
Likes
Comments
Share
@Jaindoh
Follow
Gonna let them bulk up a full 10 weeks I think. Just watching them, mostly. Fed them again, but not double dose. Moved the light up to 18", then gradually up to full dosage, Gonna let the weak plant get a little sunburn, but not for the entire grow period. Going to give them a full week on full blast, and then yank the lights a couple inches and back down to 75, to try to match the late stage DLI. Should hopefully save the terps at that point. Set up a 4" blower, now getting ~24.5-25C instead of 27-28.5C. aiming for 40% humidity I think now.
Likes
253
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies look doing really better since transplanted, They are now under the light 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) Vapo Water + Roots (1 ml/l) 0.3 l Water + Roots + Grow + Zym (1 + 3 + 1 ml/l) 0.3 l Water + Roots + Grow + Zym (1 + 3 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 17% - 65 cm Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - GG4 Sherbet FF🌲🌲 https://2fast4buds.com/us/seeds/gg4-sherbet-fast-flowering
Likes
88
Share
🍋🍊 Lemon Orange #1 - #4 🍊🍋 First time diving into the Lemon Orange grow, and the excitement is real! 🙌 As a huge fan of Green House Seed Company, choosing this strain for the first cultivation is a dream come true. Strain Information: Lemon Orange (Super Lemon Haze x Clementine) Genetics: Super Lemon Haze x Clementine Type: 70% Sativa - 30% Indica THC: 29.50% | CBD: 0.20% | CBN: 0.36% Effects: Balanced euphoria with a sweet head buzz, courtesy of citrusy terpenes and an earthy background. Flowering (Indoor): 9 weeks, High Yield Harvest (Outdoor): 4th Week of September, 170 - 200 cm height, 800g/plant yield Awards: 2nd Place Homegrown CUP 2021 Super thrilled with the progress so far—this Lemon Orange plant is growing like crazy with no issues. Germination & Veg Timeline: 🍊 Day 1: Seeds hit the scene, into cotton pads for that cozy germination kickoff. 🍊 Day 3: Transferred to small rockwool cubes, enjoying a splash of RO water at a perfect pH 5.5. 🍊 Day 6: Celebration time! Started feeding nutrients by Terra Aquatica with the first true leaves emerging. Used 80% of the recommended dose. Noticed a hint of calcium deficiency, so switched to dechlorinated tap water. 🍊 Day 9: Upped the game, into large rockwool cubes (15x15 cm). The roots are spreading their wings. 🍊 Day 12: Nutrient dance continues. Adjusted the ratio to the Growing phase, still giving 80% of the recommended amount. pH is grooving at 5.8. 🍊 Day 24: It's topping day! Right between the 4th and 5th nodes, shaping the plant for greatness. 🍊 Day 27: Time for a scrog net to guide those branches into a harmonious canopy. And now, the grand finale of veg 🍊 Day 36: Last day of veg. The Lemon Orange #1 - #4 has been a joy to nurture. Ready to witness the flowering stage unfold. 🌸💚
Processing
Likes
6
Share
Likes
46
Share
@Rollex420
Follow
Day 18 Transplanted today the plants into their 11L pots.😊 While instead i will let the Lemon Tree grow for another 4/5 days in the same pot because she only got 13 days, so I prefer to have it strengthened a little before the transplant. Day 24 Mimosa, Meringue, and Kmintz were Topped, Defoliated and also applied a light LST to the main stems of the plants. I will do the same for the Lemon Tree in the next 2/3 days.. I hope they have a quick recovery 🤞🏻 Day 27 LST also performed on the side branches of all plants except the Kmintz which is too small to bend its branches. Also Today we got 21 days for the Lemon Tree which has a great shape! Carried out topping, LST and a little defoliation.. 🙌🏻 In the next few days I will let them grow them without further stress. Have a great weekend gromies!! ☮️💚
Processing
Likes
31
Share
@Endriu
Follow
Hello Bros&Sis! Ciao!😊 quick update! Switching to flowering phase, hope everything goes fine! I've burned some tips due to use of HPS, even if in combo with cooltube. Hopes in some fine stretch to had an even canopy! In the video is shown the first and last day of this week, enjoy!😘 See ya, and always thank you for stoppin' by. Ciao! :D
Likes
16
Share
@simps
Follow
Ok so I transplanted pheno one growing pretty good not bad happy with growth pheno 2 is growing really strong looking like a good plant so all is well I transplanted into 2 gallon plastic pots I’m using fox farm ocean forest soil no additional Supplement mix just straight out of the bag I do add a little bit of extreme gardening root booster The soil’s pretty good I’ve never really needed to add too much to it
Likes
12
Share
@Pedro_88
Follow
solo me fui dos días de la casa y cuando llegue así estaba, va muy bien su crecimiento Bueno como ven e ido podando las hojas bajas para que pueda coger más luz su tallo, ahora mismo la tengo en un indoor casero que tengo por qué el clima está muy lluvioso
Likes
37
Share
@AutoCrazy
Follow
Well this plant is starting to take off exponentially in her new pot. I may have to do a big round of topping to keep her height down as I want to have the option to cover her up with the structure she is under and she is getting damn close to being to tall at this point as I anticipate there is going be some stretch once she starts to flower. I have done a bunch of cleanup of lower and inner growth this week but she seems like she almost needs more again lol. I can’t wait to see this lady in flower. 😎🍿🍻🌱
Likes
3
Share
Processing
Likes
6
Share
She looks extremely healthy and happy let's see how she performs at the end,she's 100% organic grown without any chemicals from bottles. Starting to show the first pistils on August 24th
Likes
36
Share
@Natrona
Follow
Purple Chill aka Penny was easy to grow. She was medium height 26 inches. Stem structure was weak. Many stems bent (repaired with splints and masking tape) and some broke off. She suffered from heat stress and also showed cal-mag deficiency.
Likes
9
Share
ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
140
Share
@MrJones
Follow
mrjones - Slurricane #7 S1 🌱Slurricane #7 S1 @inhousegenetics_official 👨‍🌾🏽GD Grower: MrJones 🔹🔹🔹🔹🔹🔹GOALS🔹🔹🔹🔹🔹🔹 🌞Environment - 75/80℉ and 55% Humidity 💧 Feeding - Advanced Nutrients Organic ⚗️Soil - 50% Ocean Forest / 20% Tupur Royal Gold / 10% Earth Worm castings / 10% lobster Compost / 10% Additional Perlite 🍃Training / HST, Will be topping, Cloning, and creating larger plants, and placing to flower under a trellis 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡Mars Hydro LED / Veg Geeklight Monster Board 480W V4 / Flower 480W FC 4800 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Rambling - With week 8 coming to an end, this week was spent with cloning, they are 1 week old as of today and so far they look great above the soil, started venting a little more, and over the next week will be hardening them and getting them ready to go into the veg tent. The nutrients have also been cut back to 50% with a PPM of 500. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️ Sunday - 03.28.21- These plants are recovering well from being cut back and cloned.- Fed girls with 30 ounces, they keep getting larger ▶️ Monday - 03.29.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Tuesday - 03.30.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Wednesday - 03.31.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Thursday - 04.01.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Friday - 04.02.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Saturday - 04.03.21-Feeding at 50% has allowed the plants to recover and are looking great. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Cultivar Information - In House Genetics - Slurricane #7 S1 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹
Processing
Likes
7
Share
@BrokenBow
Follow
Filter sock clogged up again, I just took the whole filter off, I'm not worried about the smell as it's outside in my shed anyway. Still warm and dry out this week, humidifier barely lasts 24 hours and that's just to keep the RH above 40. Trichs developing nicely, few more weeks to go for sure.
Likes
1
Share
Crescono a vista d'occhio, peccato per 1 che non c'è l'ha fatta, Ma va bene lo stesso... un altro paio d settimane in box,poi le 2 nel vaso in terra andranno fuori e completeranno il loro ciclo outdoor , quelle hydro in box invece passeranno in fioritura
Likes
5
Share
Defoliated a bit more, feeding sugar royal and green sensation. The smell is really coming through now.