Thank you Zamnesia for the wunderfol strain ! I'm really excited and happy of the results 😎 hope you all enjoy growmies! Thank you for ho has been following me in this journey ❤️

Hello everyone 😎 Week 5 of flower for the Orange Sherbet auto from Fast Buds 💥🍊 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Spider Farmer SE-7000 70% Have a nice day 😋

I noticed roots grew out of the bottom of my 5 gallon pots

Привет друзья мои! Моё растение во всю цветёт и пахнет! Этот малыш явно хочет жить и не сдаётся!) Вот я понимаю стремление. Кустик маленький но мне нравится. Всем мира и добра и хорошей генетики!

I slightly tied the branches down because height will be an issue. No more Veg time they will be flipped here in a few days, promising signs of recovery although she remains scared from the Mg deficiency new growth should be looking just fine. Currently drinking over 2L/day Automatic watering system would be welcomed with recommendations, Stay safe and keep it green!

So this week we have a heatwave witht 30 degrees celcius,looking good so far except the smallest one. she is a week or so younger but stays fairly small,but looks healthy. cheers!

Impressive how this plant managed to grow despite the few hours of light .. I guess what it could do with a better season than this year (there has been a lot of rains) and in a place where it grows with constant light.. anyway I am very happy with her, I would also say proud of how the growth went. In the last few weeks, as you can see, the plant has suffered an attack by caterpillars that have eaten some of its leaves in a short time, the plant has remained very strong anyway. I tried to remove them manually until they disappeared completely Before proceeding with the cut, I put the plant in the dark for 48 hours, further stressing it by shocking the roots with ice cubes. I've never used these two methods, but I've heard a lot about them. some say it is useless while others say that these methods work to increase the production of trichomes and terpenes. We'll see, I'll share my experience with you as always. Also follow me on Instagram for daily updates! Keep growing fam! Much love 💚

This is the 8th week. Thursday will be 9 weeks of 12/12. Some trichs are amber. They just added a good bunch of girth over the past few days, but most of the pistils are red now. The rest of them have been dropping leaves consistenly but the canopy remains full so they must be putting out more leaves. I just flushed to 80% runoff and found out that I had 1200ppm. I just got an ec meter but my last reading said closer to 600 so idk what happened there. I flushed until I had runoff ppm of about 150. Now they're back in the grow tent. I don't want to keep assaulting them with my microscope. I think they're ready. Just gonna let them settle another day or two to dry out a bit. I took one small branch off the small Wedding Cake plant on Thursday and I've just been watching it dry on my counter. It's been 5 days and the stem snaps but still leaves a fiber connecting. I put it into a small jar with a 64RH thing. I just want to try it. It already smells amazing. The leaves on the big CBD Blue Shark plant are going really yellow and some other colours are starting to come out as well. The buds all fattened up and got more frosty again. I was worried they were foxtailing but they got more calyxes underneath the peaks and have been making more of a pyramid shape. They're really close to peak. Harvest day will be March 17 or 18. March 17 1023pm chopped and hung after lights off all day. RH was 65% before I chopped and 50% after I closed the window and cut the plants off the saturated pots. I did a wet trim to prevent mold. The buds are sticky af. Gonna hang them to dry for 7-9 days before curing in jars :) March 18 : checked the RH when I woke up and it's chilling at 45% 😎 March 19 : just checked to see how they were drying. There are seeds in every plant. RIP I'll update when I put them in jars and again a few weeks later for final review. Overall it was a good grow despite the rocky start and a good introduction to the mainline technique and my new grow space. Next grow I should have everything pretty well dialed in. March 23 They were hanging for 3 days. Rh was around 45, then spiked to 65 overnight when I forgot to turn the fans back on. Temp was high at around 26.they felt wet after 2 days, and bone dry after 4 days. The stems still didn't snap but I put them in jars anyway. A day later, jar RH was 50%. I burped all the jars and there was a smell from the new jars. I took all the weed out, washed out the jars, and did a dry trim on the weed. One of the Wedding Cake plants must have gone hermie. I didn't see any bananas and didn't even realize there were seeds until the very end. The seed pods looked just like calyxes while the plants were growing. Many of the nugs are unusable. Under the sugar leaves are just layers and layers of seeds. Some weren't hit that badly. The CBD Blue Shark is much better off but still has some seeds. I'm trying to stay positive. It's a bit of a shock though. I'm anxious to try the finished product. If the flowers at least taste good and have a good effect, all is not lost.

Cut the little Canuck on day 75 before dawn and placed in tub of clean water for 4 hours to remove debris. Then hung under a shady tree to dry excess water. Very dry breezy day. By evening I weigh it at 168 grams stem and all. Then hung upside down bag open to dry. It was beginning to wilt after 48 hours... hopefully long enough to break down some carbs. I’ll be checking every day an if rain threatens I’ll put in shed. Hope to trim and bag in shed after 7 days to finish drying. Pyramid is ready to cut. It will get the same treatment. I know this is a little unorthodox and a bit risky getting the plant so wet before drying. I feel like it just gives the plant an extra day to use up any nutrients and break down those starches.

My first Dinafem grows and what an outcome :). I got King Kong - the biggest cola I have ever grown. It yielded 53 grams and I will update smoke report in a week time I guess. Both Purple Buds and Industrial Plant CBD should be ready. I am currently undertaking some pre-smoke report testing :) and it ain't bad my friends a all :)0000

So this is how the ladies are looking at the end of Week 4, day 28 from Seed. I have added a video with better explanation of how things have been going for the ladies up until now. Happy Growing guys, any questions just ask away! 👍🏾🌱💚

🌱 Divine Seeds Germination Report 🌱 Hey, fellow growers! 🌿✨ Welcome to the start of an exciting journey with Divine Seeds! We’ve kicked off our run with some incredible genetics: Moon Rock, Opium, Fractal, and Big Demon. Let’s dive into the germination process and introduce you to the amazing world of the CannaKan method! 🌟 The CannaKan Method: A Game-Changer! 🌟 The CannaKan method is revolutionizing the way we germinate seeds, ensuring higher success rates and stronger seedlings. Here’s why we love it: 1. Optimal Hydration: The CannaKan method ensures the seeds receive just the right amount of moisture, promoting rapid and healthy germination. 2. Temperature Control: By maintaining a stable environment, we provide the perfect conditions for our seeds to sprout. 3. Aeration: The method enhances air circulation, preventing issues like mold and damping-off. 4. Root Development: It encourages robust root growth, setting the foundation for vigorous plants. 🌱 Seed Germination Progress 🌱 Let’s check out how our Divine Seeds are doing with this stellar method: 1. Moon Rock 🚀 • Germination Rate: 100% • Details: These seeds sprouted quickly, showing off their vibrant energy. The seedlings are already reaching for the stars! 2. Opium 🌸 • Germination Rate: 95% • Details: Opium seeds are flourishing with elegance. Their delicate sprouts are a sight to behold, promising a beautiful journey ahead. 3. Fractal 🌀 • Germination Rate: 85% • Details: Our shy Fractal seeds took a bit longer, but they’re coming through with unique patterns. They remind us that every growth journey is special. 4. Big Demon 💪 • Germination Rate: 100% • Details: True to its name, Big Demon seeds are growing strong and bold. These seedlings are the powerhouse of our garden! 🌟 Key Observations 🌟 • Uniformity: The seedlings are consistent in their development, thanks to the precise conditions of the CannaKan method. • Health: No signs of disease or malformation. The CannaKan method’s optimal environment is working wonders. • Vigor: The seedlings exhibit vigorous growth, indicating a healthy start. 🌱 Next Steps 🌱 As our seedlings continue to grow, we’ll: • Monitor their progress closely. • Transition them to their next growing medium. • Provide the best nutrients and care to support their journey. Stay tuned for more updates as we nurture these incredible plants. We’re thrilled to see how they’ll flourish and share every step of the way with you. Happy growing, and may your gardens be ever green! 🌿💚 #DivineSeeds #GerminationReport #CannaKanMethod #MoonRock #Opium #Fractal #BigDemon #GrowDiaries #PlantMagic #GreenThumb Germination method 🌱 @thecannakan Genetics @divine.seeds Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_officiala 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Day 60 since seed touched soil. Joe is going okeish. Smallest from all by height, some branches stayed in first level of scrog only .. Still see signs of magnesium, thinking to load 200ppm of Epsom salt with next watering. Watered girls yesterday. Thinking to do heavy bottom clearing today. Dropped idea of third scrog level. Girls are secured enough and i dont want to loose access totally. Running out of height ... Distance to light- around 20-25 cm. Mars TSL2000 works just fine, with open window i keep day temps in 22-24 range. Took down all LST, cleared bottoms. Took a bit of leaves from top too. Very lanky, leafy, some tops didnt want to go higher, looks weak as producer, but all reviews are amazing about taste, so hopefully this will compensate ;))))) Day 62. All run, Joe stays low ;)))) Happy Growing !!!

CBD Star bud seem to be thickening up despite obvious signs of deficiencies, likely due to a pH induced nutrient lock out. Phosphorus, nitrogen, calcium, manganese, molybdenum? It’s basically the periodic table of deficiencies. Main cola started to turn purple due to molybdenum deficiency? Found a spider mite on Cheese… sprayed the leaves down with a 1:10 alcohol:water solution which seems to have taken care of the mites.

—SETUP— .BOSSLED LED 1800W full spectrum, real power consumption is +-250W. .Grow space 60X100X200(a simple shower box. .AN nutes and other simple additives. .Grow medium is 60% peat, 30% perlite, 10% organic correction(worm castings), 5 gallon fabric pots(18l). —BRIEF— Hi there, I have tried already done this genetic outdoors, in poor lighting and a general purpose nute from Neudorff, yielded 25g dry, in 3gallon pots same medium. So this is a good experiment, lets see indoors how she will compare. —GERMINATION— My germination process always start by scarifying the seeds, i created a little tool for that. I just a little container with sandpaper walls. Shake gently for about 60 secs+, this allows for the water to penetrate better in the seed shell, once you soak. Then i soak overnight from 12 to 20 hours max. From there i either plant straight or use the paper towel method to see the tap root before. If you are a bit on the impatient side seen the tap root is advisable so you see some movement before planting. Lol! —ROYAL QUEEN SEEDS . QUICK ONE . INFO — Chose this strain because is basic and I have to travel for a month soon, and someone else is going to take care for this time. :) Most of our autoflowering feminized strains are easy to grow. This one, however, is so easy to grow that we had to call it Easy Bud. Easy Bud is very similar to the autoflowering strain White Dwarf. THC: 12% CBD: Low Yield Indoor : 275 - 325 gr/m2 Yield Outdoor: 30 - 80 gr/plant Height Indoor: 50 - 60 cm Height Outdoor: 60 - 110 cm Flowering: 5 - 7 weeks Harvest month: 8-9 weeks after sprouting Genetic Background: White Indica x Ruderalis Type: Sa 15% In 55% Ru 30% Effect: Physical Climate: Mild —RQS EASY BUD GERMINATION UPDATE— My mood said to me to plant straight, so scarify > soak 18 hours +- > plant straight. Seedlings look a bit odd, this one with a purple center, let's give her some days in and see what happens next.

Night time photos so ladies look a little droopy from being in the light all day. Woot woot Cheers to Ecofarm for Fast and friendly service. Got the grow bars in today and they will added to the tent, they are 90w Led grow lights 4 feet long with Banks of Sanan Epistar Smd 2835 and Osrams. PPFD of 198 @ 18” added to the power already there and we got a heck of a light setup. The lights are of great quality and have a three year warranty. Next big investment will mostly be an Apogee Light Meter, tired of fucking around and playing the Guessing game with “Lux meter” on the cell phone. After we acquire the ppfd meter the next step will be acquiring parts to build our own grow light. Also planning on experimenting with light moving technology next grow so we can avoid some of hot spot issues known to be present with Cobs. Lights lights everywhere lights what the heck is going on here? Well the whole idea is to have a ppfd that is as close as possible to 1000 or higher Par/ppfd at 5 foot by 5 foot. Ladies will burned but yields will be large. No guessing or estimating yet. Taking a wait and see approach. The purple gelato mutant is still showing signs that she may indeed be going into flower. Not overly concerned, just kind of cool thing. So all said and done we will try to run 6 side bar lights. 4 cheaper led bars equaling about 180w with 2 Chinese high quality led that are also equal to about 180w. There is also a 2000w Cob grow light with 4 cobs and a bunch of leds draws about 400 watts. And finally a Parfactworks 500w grow light draws about 150 watts. These are all give or take numbers so really I could be drawing 1000 watts or I could be drawing 800 watts. Not really concerned about the power draws we are after bigger weights. And without investing in a new grow light this was our best course of action. Pleased with how everything is progressing and looks great. So I'm actually kind of not use to plants growing this fast every plant is showing gender now in some way. The mutant is most likely not pushing into flower. But again I'm not use to plant growth this fast... Umm #@$% you Advanced Nutrients I used them for half a year and never really had anything to compare them too. This is a superior product in every single way including Price.. Thank you Green Planet Nutrients for making a fantastic product. SMD 2835 – A cheaper led fairly efficient rated at 2.2umols/j with a 3 year warranty offers good value to performance. Comparable to Lg 5830s and Samsung 301h(b) But not as energy efficient. PPFD - photosynthetic photon flux density A link to a video with Dr. Bruce Bugbee a very respected and valued member of the Cannabis growing community. In the video he explains a lot about light intensity and yields. Seen it first hand and this gentleman does indeed know his stuff. Here's a link: https://youtu.be/ID9rE5JewVg