D42 F6 One week of 12/12 and she's stretching out real nice. I'll start to feed them from week 7. I've defoliated the central cola to allow the sides to catch up.

_____________________ | ROYAL CHEESE HARVEST | |_____________________| Whats up!! Harvesting a little earlier than when i would like, because of the rise of bugs that appeared last days due to climate conditions... this year temperatures are oscillating more than usual having 1 rainy week, then a sunny hot one just after it rains.. In fact, last year, it did not rain until November So the plagues were on the leaves, mildew powdery(just a coulpe of leaves),aphids(like just in the leaves of one cola), and some caterpillars almost ready to get out and start eating all the buds, (hopefully i cut that day).. Sounds bad, but the parts of the plant affected was only the leaves... and means that a proper cleaning is coming so removed all the leaves and the result is what you can see, that bonsai.. Spotted 2 dead material points in big colas, that i removed after drying.. I did not weight the plant wet because of the smell that i had on my house that day, things went very tense, i was a bit busy, and even, it has not much sense to me, im better weighting the dry material. So at the end i think im having very good quality, and the affected parts are less than i thouth at first, so im very happy with the results.. On the scales are the best buds, the rest is the lower part of the colas that were less developed so im doing hash with that part.. Been busy guys so im uploading more photos today ^^ I hope you like all the grow thank you for follow it :) Song: Eazy-E - Down 2 tha last roach00000

New week ! :)

Esa familiaa, estoy impresionado porque estas skunk están muy compactas, es una cepa increíble, y no la fume todavía, solo hay que verlas no solo lo prietas que van, si no lo tricomas as que están . Hay que felicitar a Zambezaseeds ya que esta variedad es muy estable y sencilla de llevar. Ph controlado, quitamos productos y lavamos raíces, pronto solo agua. Ph controlado, temperatura por debajo de 29 y humedad por debajo del 40%, deseando que estén listas para ver la producción, esss flores pesarán, hasta la semana que viene fumetillas.

First time grower - Day 3 - Seedling Stage Unknown strain, hopefully its a female Light meter currently reads 101 lux x100 Should I give it more lighting or put it closer to the plant? Using roots organic soil, should I prepare for nutrient feeding after week 1? And if yes, what nutrients should I feed them?

flowering day 59/"FD59" (flowering week #9 since 12/12): ... the final 1-2 weeks with only water/no feeding :) flowering day 60/"FD60" (flowering week #9 since 12/12): i just uploaded a video 😎 flowering day 61/"FD61" (flowering week #9 since 12/12): early today i spotted four banans/nanners (first row right) und two banans/nanners (first row left) in the 80x80 240W tent on two plants in the (closest to the camera) first row. Cause they are nearly finished i decided to crop these 2 plants. They look really beautiful and purpled very much., I think the reason for the purple is that that they where the closest plants for the fresh air within the airflow and it was sometimes a little bit cold. I am a little bit frustrated cause the quantity could be 50% more but this time i am pretty sure that the LED panel was too close and/or too much power (95% powered 2x 120W panels). Next time i will use a new tent and plan to spend more time for the hole air and carbon filter setup. This time i had not enough space to raise the panel higher... Maybe the spide mites attack in the early flowering stage was also a factor. flowering day 65/"FD65" (flowering week #9 since 12/12): just a few shots before the final crop in ~1-4 days 😎 Summary for the next grow: 1. next time i will raise the LED-panels distance higher and reduce the power to 80% in the late flower 2. buying a better 80x80 tent 3. i will use poison in the last days of the vegetative phase again to be 100% sure that mites&thrips have no chance 4. four plants in 11L pots are enough in the 80x80., Otherwise it is hard to keep care of the plants in the last row. This will make the veg-phase longer (training) but i think the better airflow and more space are really better 5. next time i will use a scrog-net again... handling to stabilize the buds every day is too much work 😂

16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 º humid - 50- 60 %

Hello folks 😎 Welcome for the first week of flowering ( 45 days veg )✊ they reacted well to the transition to 12/12 day/night just the little one begins to show signs of deficiency but it makes sense given the size of the pot ( 6L) Still no nutrients, just rhizotonic with aprox 4.5 liters of water every 5/6 days At the end of the week (day 7) I swaped the MH 400W with my new kit the Hellion 600 / 750W DE-HPS, in my opinion it's a must have if you're a fan of HPS 💪 See you next week Peace Love & Weed GD Fam😍👊

-Godetevi il video della presentazione del locale di coltivazione!!!! -Problema calo PH in stabilizzazione. -Continua problema di ingiallimento foglie a ventaglio!?! -Mainlining e manifold in crescita. -Il controller CO2 Evolution della Etechnics funziona male (fa svuotare la bombola).

June 21: interesting how the tie down leads to the lower growth tips growing much faster. This is likely a reliable way to improve yield without stressing the plant very much. The response of this plant to the tie down is a bit of a revelation. I didn’t think these plants would do much with the cold weather start and potentially bad soil, but in the last month they’ve done great. Now using tie down method on some other autos where it looks equally impressive. Influenced by @Roberts and his auto tie downs using 12 gauge wire. Didn’t think this diary would be a contender for best outdoor grow, but now I think I better start posting weekly videos.

Flower smell like lemonand gas flower so stike

Normalmente una planta automática ya está floreciendo en la cuarta semana, pero estas RUNTZ auto no quieren parar de crecer formando una estructura fenomenal gracias al LST.

Bud sites appearing lovely

https://youtu.be/YrTZFTFr3tw Grow went well with no hiccups I took some clones and will definitely growing these strains again as I feel I can push them a lil bit more

Last week of pre flower girls are doing great can’t believe they’re clones

This was my very first international trip outside of North America. This was in March 2023. I’m off to Tenerife. Here are just a bunch of photos from that trip. I had a great time.

🌱 Week 3, Day 7 Update: Buds Are Blooming! 🌿 Hey Grow Fam, We're cruising through Week 3, and my girl is really coming on—buds are starting to form, and it's a sight to behold! The girl is growing so fast now, drinking 4.5L a day. She could even do with in-between waterings, in my opinion. She's aiming for the stars and shooting for the moon, getting bigger every day and stinking out my room. I had to tie my light higher up with some rope as it wouldn't go any higher, and shoots were getting way too close! I did SCROG when flipping, and I should've been a bit more strict on it (did it longer), but now I realize why SCROG is used. Imagine if I never used it—she would be way too tall. Overall, I'm so happy with how she is growing and can't wait to see the final product. :) But, as with any journey, we've hit a little bump in the road. Despite keeping our feeding consistent at 850ppm, the runoff readings have been creeping up. Last check-in showed a runoff of 1400ppm. It's got me thinking we might be dealing with a salt buildup in the root zone. To address this, I'm sticking with our feeding routine at 800-850ppm. If the runoff ppm keeps climbing or if our plants start showing signs of nutrient burn, I will adjust accordingly, but as of right now, I'm sticking to the same feed as she looks great! ( If I do begin to notice signs of nutrient burn (excess), I will try to water with a lower EC/PPM, like 700ppms, to bring it down. But if I don't get the results I'm hoping for, I will just flush the plant with 3x the media size of water (just plain pH water) to wash out any old salts and reset the medium. You don't really want to do this with coco depending on what stage your at in flower, veg on the other hand flush.? Sure!, if you really need to reset that medium go for it, (i do see tiny signs of burn but thats fine if it gets worse then i have a problem) Let's stay focused and keep our eyes on the prize—beautiful healthy buds. We've got this! #GrowUpdate #Week3 #BudsBlooming #KeepGrowing 🌱🌿

Got better at week 8 end. Finally lots of trichomes, buds are gettin denser last couple days. Made a couple of pure water waterings between nutrition. Defoliated hard and seems like this is last time before harvest. Please share any thoughts/tips on better growing this baby👇 Peace🙏

relaxing and enjoying the show almost at max watts SPIDER FARMER SF2000 is now maxed out at 207w , 16"-18" from the plants and I will need to keep up with pruning to allow more air flow and more light to penetrate deeper into the plant. 2, 6" oscillating fans on 100%, may be on low or just one stationary but at this point in the grow air flow is a MUST, specially for the thick, dense vegetation of the OG Kush. trying my hardest to stick with the 4" ventalation til the end of the grow. Right now I have to replace the exhaust ducting due to tiny pin holes leaking more than a bit of light.