Processing
Likes
29
Share
@Damonkey
Follow
Things ok.......😳. Nah as soon as I think I gotta hold of something it plays around with me. The grow is going well and the plants are mostly showing a great fast rate of growth. Flower site formation is rapid and covers the whole canopy and below. But alas the temperature she rises😩😩. Last night caught the temp at 32 C. Gorilla growin ain’t always bananas😳 I can vent it quicker and keep the temp a little lower but the noise level is just too high. Here comes more expense😩😂. Update- last day week 2 of flower..... everything looking great one plant a little slow in developing but rest good. LED are still outstripping HPS in the race for mature buds. I can’t wait to try the herb that comes from the plants that have exposure to both kinds of light. I’ve added a pure CO2 spray dispenser in the tent also. It’s from Airbomz. Gives them a quick blast hourly to supplement the exhale bag. This is just a temporary fix for rise in temp I’m floating on and just above 30C during lights on, hopefully the CO2 level in the room should aliw the plants to carry on growing well in s slightly higher temperature.
Processing
Likes
1
Share
I think she was locking out nutrients or something. She has stayed very dark, and it was taking a long time for her to mature. But now that she is being flushed, she's filling in and growing nicely. Very resinous and looks like she's gonna be dense
Likes
21
Share
I loved every min of her. Shes is hanging to dry and will be trimmed and weighted as she dries. Cant wait to smoke her. She was so heavy in the end she needed yo yo hangers to have her supported under all her weight. I would love the chance to grow her again. Oh my god she is sooo heavy like wow i cant even with her. The rosin she produced is just fire. Lemons and vanilla and so heavy. I would grow her a million times over.
Likes
36
Share
Hey everyone 😃. Another wonderful week is over and they are developing really well 👍😃. I think I'll put them in the flower chamber for about the next 2 weeks. until then I wish you all the best 😋 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
30
Share
It's been a pretty good week. I did quite a big defoliation, as things were getting crowded. I switched to a more flowering dominant feeding, I decreased the Nitrogen and pumped up the phosphorus and potassium. I will soon do a flush, as it looks like the nuts are starting to accumulate at the roots.
Likes
7
Share
@Soskar69
Follow
This baby is going good, thricoms production and smell on point👌 The main cola is growing very big, I'm so hyped about it 😝 Some of the leaves are becoming yellow and i saw some signs od deficiency of some sort but I'm not worried because she is near the harvest, I think another 2 weeks and I'll chop it: Sorry for the low quality of the photos, next time I'm gonna use a better camera.
Likes
25
Share
@Dingle
Follow
Starting to ease up on the feed now going into week 7 of flower. The buds are really starting to bulk up in size and the smell is still increasing into a sweeter aroma as they develop further. More defoliation again this week, unfortunately I needed to remove a few too many underdeveloped buds from one of the smaller plants to help improve airflow and help prevent damp developing around the denser areas of the plant. I plan to add another fan this week to help increase air circulation in general. Keeping a close eye on the trichome development now as they finish up. ✌️
Likes
15
Share
Likes
3
Share
@Fyno_TH
Follow
Week 5 update 🌱🔥 — the tent is looking full and healthy! Main plant is wide and strong after topping + LST, really starting to show her structure. The second plant is still smaller but holding steady, pushing new growth and showing good recovery 💪. Feed mix this week: Corex + Eldex + Terra + CalMag + Bud Candy + Mira + Terpinator (~1400 ppm @ pH 6.0). Watering to 10–20% runoff each time keeps the coco clean and roots thriving. Temps holding steady around 27 °C with RH 60–70% 🌬️. Leaves are praying hard under the Spider Farmer G3000 with no signs of stress or burn. 💡 Grower Tip (for Thailand growers 🇹🇭): If an RO system isn’t convenient, you can use the local street purified water machines (1-1.5L = 1 Baht). Cheap and clean enough for coco grows without the heavy tap water ppm.
Likes
10
Share
@barlobruz
Follow
7/6/2021 - Trimmed lower fan leaves as they were being blocked completely, and a few tips were yellowing. - Continuing to lightly bend the upper branches so the lowers can catch up. - Bought some Gaia Green veg + bloom dry fertilizers as I expect I'll be flipping to flower soon. 7/7/2021 - Watered in a little bit of Gaia Green's veg fertilizer. - Foliar fed w/ DIY kelp extract. - Yellowing/browing on a new leaf, can't identify what it is. - Staked down the branches on the upper mains this evening to open her up for more light penetration, she was gettin' real bushy. 7/9/2021 - Trimmed out middle to expose canopy
Likes
10
Share
@MG2009
Follow
11/24/2020 Seeing pre-flowers nice healthy new growth maybe add some h2o2 to clean up roots some, some brown algae? Maybe. Going to lower water level to 8 liters let roots stretch more an fill out bottom of bucket, also a serious defoliating is needed, But it can wait till next week. Her clone mom was harvested at day #50 in flower, not fully ripe and it's still pretty potent stuff, I think I can go to 63 days and still get an energetic high, mom still had, 30% clear trichomes with no amber at 50 days. So I will harvest 1-2 cuttings to keep them going as everyone that tried it liked the results, but this one should finish faster with Hydro, so we will see how it goes.
Likes
8
Share
Likes
46
Share
@Ju_Bps
Follow
Hello my friends growers This week I've got more and more yellow leaves, Do you think it's a carence, water excess, precose senesence? I don't what I need to think, or if just normal, I just give her water two times per week. 0.6l x 2. Fertilizer 1/2 times. I think I'll harvest end of this month or start December. If no, bud are biggest each day, and smeel really sweet. I've also started pk 13 14 this week. Sorry not lot pic's this week , I've broke my phone and lost several pic's. Have a good week 😁😁
Likes
4
Share
Another easy auto to grow looks like she’s gonna come out amazing When dried let’s see how it goes!!!
Likes
6
Share
@Sadhus
Follow
Journal de Culture - Dognabis Cup variété : Permanent Marker Semaine 4 - 1ère Semaine de Floraison Date : 11 octobre 2025Observations :Les plantes ont doublé de taille grâce au stretch typique de la phase de floraison. État des plantes : saines et vigoureuses, aucun stress observé cette semaine. Paramètres ajustés :PPFD augmenté à 800 (cible atteinte selon les données). VPD réglé autour de 1,0-1,1 kPa (cible atteinte, valeurs mesurées : 1,06 kPa jour, 1,09 kPa nuit). Température moyenne : 24,4 °C (jour), 22,5 °C (nuit) - cible stable. Humidité moyenne : 65,22 % (jour), 59,98 % (nuit) - ajustée pour maintenir le VPD. CO2 : ~900 PPM (cible atteinte). Solution : pH 5,92, EC 2,20 mS/cm, température 19,7 °C. Notes :Les paramètres ont été optimisés cette semaine avec une augmentation de la lumière (PPFD) et un réglage précis du VPD. Aucune intervention stressante, les plantes répondent bien aux conditions. On garde toujours les même rythme de marré pendant le stretch pour stimuler une croissance végétatif, semaine prochaine je vais commencer a réduire progressivement la durée des marée et augmenter progressivement le temps entre 2 marée pour commencer a stimuler une croissance générative pour la floraison Objectif pour la semaine prochaine :Maintenir les mêmes paramètres : PPFD à 800( on commencera une augmentation progressive a 900) , VPD autour de 1,0-1,1 kPa, température et humidité stables, sans stress supplémentaire. Légère defoliation prévu et petit lollipop 🍭 Merci de votre attention et merci a tous
Likes
Comments
Share
Day 15 Update : Decided to grab a tape measure to check canopy heights on a whim and discovered that my light was hanging 35 inches from “Cellie” Cereal and Milk . Wowzers 👀! So I raised the plant to be 26 inches from the light that I also dimmed down to about 40% . It works out that I can try to get the most out of the end of flower stretch for the older gal who shall no more than be mentioned for reference to accentuate the great glorious glamorous “Cellie”. The humidity plummeted after I did a major defoliation of the older gals so I adjusted the airflow rate of the lower in-line fan and the upper inline exhaust fan with the carbon filter . I lowered them both to the lowest setting & the humidity returned to “normal” Let me explain my reasonings/thinking behind my adjustments which are experimental at BEST. It’s worth also mentioning without having to preset a single thing on my 70pint Dehumidifier located inside this tent it is legitimately only plugged into my PRESET humidistat controller which is set to 50%-46% RH WITH an alarm on highs of 55% and lows of 43% . In real life what this translates to is when this humidity controller triggers the dehumidifier ON @50%RH immediately the fan of the Dehumidifier begins running. However this does not help the rising humidity that is occurring (it will reach 55%-60.2%RH ). Given a fixed amount of time , the condenser(atleast what it sounds like . .again, it could be anything) turns on . It is when this “condenser” “sounding” component begins working that the humidity IMMEDIATELY plummets down to my low point of 46% So to make a long story short the humidity gets vacuumed to 46%RH & the dehumidifier turns off, bc of the PURPOSEFUL EXPERIMENTAL TWEAKING making all air exchange fans low leveled the humidity slowly but steadily rises to 50%RH then the dehumidifier is triggered on but only the fans initially and the humidity eventually reaches 55%RH-60.2%RH & then the humidity gets all its hair snatched out by the dehumidifier and drops back down to 46%RH. 😮‍💨😮‍💨😮‍💨😮‍💨 with all that said of anybody was even interested per my tents leaf canopy height temperature average good to great OR LITE GREEN TO DARK GREEN VPD for my temperature begins @ 60 & ends @ 52 which is kind of a perfect storm for OUR GIRL “CELLIE” oooooooorrrrrrrrrrr sssssssoooooo I think/hope . She still hasn’t needed watering since being transplanted, she should now ready and willing to stretch those toes and we need the opportunities to top water that soil a few times to make those dry amendments available to her . More pics of later the week coming as we go . . Hopefully . Diligence is a practice Day #17: giving her some water today, no specific amount just until she feels the right amount of “heavy”. She was given 3 different batches of water once ph’d to 6.3 once ph’d to 6.7 one ph’d to 6.5. She’s grown an inch in 2 days. Also swapped out the smart hygrometer system to a different brand . So far it has all the capability I was looking for but I need to run 2 more experiments to know for certain it lives up to my needs and its price tag 😁 Day 18 Update: she grew an inch taller nice 👍 The smart hygrometer system has reported/experience Bluetooth failures twice already(although I don’t know exactly what that means considering I purchased this for it’s Wifi capabilities ) I didn’t think to check it whilst I was away so I cannot yet say If it meets my final expectation/need I bought a soil ph meter & it indicates “my mix” is at 3.1 ph 👀 hmm 🤔 I’m wondering if this is a must fix or can I get by .eventually she will be transplanted and at that time I can use my new digital soil ph probe to construct her new blend moving forward but I am curious is I mixed another batch at 3 something ph would it matter ? In the beginning I wasn’t ph’ing any of my watering just because I assumed my soil mixture was highly acidic because of the 70ish pecernr peat moss base . I also assumed that it would be acid fixing for the water I put in it and therefore wouldn’t need to ph it and I did just fine just giving plain old tap water when thirsty until I experience VPD issues & in an effort to pinpoint what my exact issue was and how to fix it I of course eliminated all the variables and dialed in on my ph of my feed water and now my soil so it leaves me wondering does the soil need to be relatively 6.1 ph or is the 3.1 I’m flying at alright also . I checked the other 3 currently in here getting through flower & two of them are in the 3’s for ph & one of them is 6.2(the largest of them all) how ever she was the largest of them all always and oddly enough I mixed one big batch for them and transplanted them at the same time so I get two of them having the same ph as “Cellie” but the other that is in ph heaven is an oddball Should I top her here or supercrop later hmm I need to decide my vision for this thing Day 19 Update: ponytailed her youngest internode for about 16hrs she aggressively popped out of it twice ! It didn’t even work for 24hrs when I try it again it’ll be before the internode is so strong . Also rigged up a 16in oscillating wall-fan that currently being held with 2 zip ties , 2 rubber bands , & a smidget of duct tape and MAJORITY OF FAITH keeping it in place . The biggest plus to my added circulation is that I got the 16in fan for ! A win is a win . Pics uploads will be held for the next 3 days until the end of week 3 upload . Drop a thumbs up Day 20 Update : THE FAN FELL! But no one was damaged or injured . I re-rigged it . This time with duct tape , 3 popsicle sticks , 2 heavy duty zip ties & 1 regular strength zip tie . SHES SOLID NOW 😂 I did some solid rigging this time & have videoed my handy work . Also I forgot to turn my A/C back on before leaving the house so temps and humidity skyrocketed and swung for 9 hours until I got home . The temp in the tent was 84.4 and the humidity went from 42.4 to 57.5 to 42 every three mins. Day 21 Update : SHES A PRETTY GIRL. RQS says Cereal Milk is a slightly sativa dominant hybrid but the pheno of this particular seed seems to lean more towards indica I’m not mad at it ! I’m getting more stoked to see what she can do. She still hasn’t received any additional water since day #18.
Likes
3
Share
Likes
3
Share
Jours 14 : 26/10/24 Elle se porte bien Elle est devenue beaucoup plus violacée et attrape quelques nuance de rouge. La croissance continue, on voit encore des signes au niveau des nouvelles feuilles, elles sont verte mais encore remplie de trichomes. L’odeur est encore agréable, me donne envie de le sécher et de l’extraire! Hâte de voir la suite 👨🏻‍🌾 Me restais un peux d’espace j’ai mis un mini rosier il a l’air de se plaire
Likes
15
Share
@glenk222
Follow
A little defoliation, water only yet about 1/2 to 3/4 of gal every 2 to 3 days, no problems noticed. Starting to show signs of flowering.