Likes
Comments
Share
Flowering continues even gained height aprox 45cm now total. Issue with Nitrogen solved with 24/7 Open window. The White Diesel is still bit behind in growth but also good process. 5/13 day 38 BM and day 36 for WD swapped to 20/4 to check the effects. 0.5l plain water given each plant today . 5/14 Trichomes visible on top of the leafs
Likes
3
Share
Eine weitere Woche ohne große Mängel und Vorkommnissen die man nicht händeln könnte. Die Luftfeuchtigkeit ist mir ein wenig zu hoch, also müssen Blätter weg. Wenn ich schoneinmal die Schere in der Hand habe, können auch direkt wieder unten ein paar Äste weg. War mir schon klar dass das Netz nicht viel bringen wird bei der stabilen Sorte die ich da hab, aber so crazy unterschiedliche Phänotypen ist schon echt heavy. Äste werden soweit es geht verschoben und Nodien an ihren Platz gebracht sodass diese direkt richtig einwachsen, ohne dass ich noch groß eingreifen muss.
Processing
Likes
8
Share
Thought my growth was stunted but I came back from a 5 day vacation to some pretty consistent growth. Also the one from last week with the weird growth came out looking normal after the first couple leaves.
Likes
52
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
5
Share
@Wenz004
Follow
Experiment explanation see week1 This week nothing special happened with my both living soil plants...only the flowers got a bit more fat...nothing else Got some water and compost tea...thats it
Likes
422
Share
Hi everyone 😁 Welcome back on another week update. So far everything going as well as can be. Both 🍌💜👊 girls developing very well. This week I have reduced root juice by half and by the end of this week may introduce fish mix and biogrow on very small dose but all will depend how girls will be developing in coming days. Thank you all for all the likes comments, follows and pm's. Love you all 😁💚 I will keep updating this week progress every few days. Wishing you all a wonderful week ✨🍀✨ Peace and love brothers and sisters ✌️💜 23/10 day 15 Smooth development on both baby girls. Watered with approx. 300-400ml each pot on the entire surface. 26/10 day 18 Girls are growing very nicely. Today another watering approx. 200ml each of 🍌💜👊 girl. Still spraying water around the surface everyday. 29/10 day 21 It's been a perfect week. No issues at all. Very steady growth. Next week will introduce to my 🍌💜👊 girls few new dishes and possibly will start with LST. Thank you all for such a great support 😊✌️💚 Wishing everyone a wonderful upcoming week✨🍀✨ Peace and love brothers and sisters ✌️💚
Likes
13
Share
Week 14, Week 14 was the last week before Harvest/Havrest! I flushed the plant and trimmed her a bit before harvest. I hope you all enjoy the videos and the pics!
Likes
20
Share
@GR0WER
Follow
New week starts! 🌞05.12.2022 This day began with smell rising. I think flowering starts. There's a few pestels in every knot (but not on a top). Watered my girls with nutrients without 'Roots' stimulator. I should stop to give it a long time ago, I hope it gave no harm. Soon when the odour will become too intensive I'll turn my filters on. It will be very noizy, that's why I want to do this as late as possible. 🌞06.12.2022 'SeaWeed' spraying today. I changed distance to lamps. Now it's 40sm. Temperature didn't rise, so it's OK. Upd: I made some LST on evening. It's a last training for them, I guess. 🌞07.12.2022 Pre-flowering stage started! I turned on third 100W lamp. Now it's 300W total. Fed my girls with GHE pre-flowering nutrients complect. Sprayed with 'SeaWeed', as usual. 🌞08.12.2022 Today I came home from my job to see both girls increased in their high dramatically, +5cm in 24hrs. Maybe it's because of feeding, maybe lights, maybe auto flowers act like this, I don't know. But I saw larger distance between knots there. I was forced to do one more LST procedure (result is on photo). Also, I sprayed my 'BPPa's' with 'SeaWeed' (as usual) and moved pots closer to each other to place them in a gaps between three lamps of mine. I'll feed them tomorrow. 🌞09.12.2022 Today I noticed brown tips on the my babies leaves. #1 has alot of it and #2 kinda few. I considered to water them with 'GHE Clean' solution one time, next time I'll give them half of a nutrients dose. Smell gets stronger. Tomorrow I'll turn my main ventilator with two carbon filters I have from the previous grow. 🌞10.12.2022 Yesterday I flushed my plants with 'GHE Cleen' solution 2ml/l. Today I do nothing. Tomorrow I'll give them 75% from previous feed formula. 🌞11.12.2022 I putted small amount of sulfur in an upper layer of substrate, ~10g/m². Watered my plants with 75% from 'pre flowering' GHE recommendation. Sprayed leaves with 'SeaWeed'. Week ends.
Likes
11
Share
Entramos en la 9 semana y seguimos con heladas en el exterior , las mínimas con luces apagadas son de 15º y las máximas con luces encendidas
Likes
8
Share
@Chupus
Follow
I put it in a glass of water , later I will transfer it to paper towels . as practice shows , the method is working . It's not the first time I've used it. the main thing is to squeeze a towel well, so that the seeds do not rot. 20.06 watered usually with tap water PH 6.4 ppm 30.
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Processing
Likes
Comments
Share
the two rainbows are on flowering Time and we also changed the ciclus for the san Fernando valley also from B.S.F. Seeds, we are expecting the TnB naturals #co2enhancerbottle
Likes
2
Share
Start of week 3 feeding Plagron: Alga grow 1ml per liter Fish force 1 ml per liter Power roots 0.50ml per liter Calmag Pro 0.50 ml per liter Siilic rock 0.50 ml per liter 450 to 550 ppm Day 18 had keep same feeding but changed light to 18/6 as soon need to do first topping so plant need to rest.
Likes
6
Share
@DonEspas
Follow
Reste 2 semaines Passage en 12/12 Réduction de l'hydratation Légère baisse d'intensité lumineuse 4 phenotypes complètement différents (structure, chemotype, vigueur) L'ensemble paraît qualitatif Garderont ils leur qualité organoleptiques pour le le smoke test ? 👀🏁
Likes
18
Share
Ladies and gentlemen, here we are getting into the 3rd week of flower, so you know what that means!!! Next week is Plagron Green Sensation 💚 and silica and a little cal mag, if needed... this girl is getting big.She is about two and a half feet wide and has been stretching like crazy.. this is gonna be a great plant and a nice harvest, and I can't wait to see how the Plagron nutrients swelling up those buds .. stick around because if need be I will add more pictures throughout the week .. thank you Zamnesia Seeds and Plagron for the opportunity to grow this beauty 😍.. I hope everyone is doing well on the contest.Since everybody else God bless and happy growing ✌️. Day 56 i just uploaded a video showing what she looks like after a massive defoliation. In lollipopping, we're focusing on the top of the plant.. hopefully the stretch is over and start stacking
Likes
27
Share
@Dedon
Follow
Hi ! 10 days after i switch to 12h/12h they have grown well. Trunk are massive and roots are impressive, they continue to grow, i guess they'll colonize the whole tank ^^ Plants are drinking a lot and EC is lower everyday. i have to add nutrient 2 or 3 times a week to increase EC to 1.2/1.3 again ( EC drop from 1.3/1.4 to 0.8 in 2 days ) I wonder if I had to cut some leaves to light the bud sites because there are lot of leaves ( it's a dense bush ) What do you think ? See you next week 🙏
Likes
3
Share
@CaliJ
Follow
Day 49: last day of nutrition for the fast eddy, which seems to be almost ready already. Stoppage of pk 13/14, day 49. day 50: 2 week rinse for all. ⚠️ My led lamp is a Prima Klima - LED Shuttles 6 dimmable 240W, I am very satisfied with this lamp (check out my other diaries). which I recommend, but which unfortunately is not in the list proposed on growdiaries
Likes
Comments
Share
Frosty’s purple freak is now Week:8 of vegetive growth and its 9th-11th set of true leaves with multiple side branches emerging I defoliated the bottom 2 sets of leaves as well as lollypoped the 1 nodes side branches
Likes
39
Share
@Siriuz
Follow
Happy growing everyone Thank you so much sweet seeds We promise and we are here to show you Stay tuned because we just started And she will grow beautiful indeed Best of luck to all growers in their journey DAY 1 TO DAY 3 THEY FINALLY SPROUT FIRST COTYLEDON SHOWING DAY 4 TO DAY 5 HAD TO MOVE HER TO A BIGGER POT DUE TO TAPROOT COMING OUT OF PEAT MOSS
Likes
Comments
Share
@Naujas
Follow
1 savaitė :) viskas atrodo gana gerai, nors kol kas augimas lėtas :) Kitą savaitę persodinsiu į paskutinį vazoną :) sėkmės visiems :).