So we are entering week 6. Time pass fast! For me they are look good. 2nd light really helped, might be going a little crazy but i just got in my 200w spiderfarmer 😅 i thought they could use this extra boost of light for bloom. And did some small LST, and still doing it. Just pulling them down with

~ FastBuds Strawberry Gorilla Autoflower Harvest Report ~ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Here we go fam!...after 13 exciting weeks this run of three FastBuds Strawberry Gorilla Autoflowers has come to an end and, despite some hiccups along the way, all three of this phenomenal cultivar delivered the goods! This was my first attempt at 'hydroponic' growing and honestly I made some mistakes along the way. In hindsight, I ran too many feed cycles in a 24hr period which did not allow the medium and fabric pots dry out enough which led to a Fungus Gnat infestation which wasn't caught until late into flower. I also think I had the nutrient level set too high which may have kept the upper portion of the medium too wet. Other than those issues the only other hindrances were related to the actual ebb/flow system itself and beyond my immediate control such as plant spacing, solution temperature etc. I will say that when using this AirCube system I found out the hard way that you really need to have all of your plants starting at the same time, and preferably of the same strain unless you're using a trellis net to control the canopy height. Lastly, I will say that the GrowAce AirCube system was very well built, used quality materials, is expandable, and was very easy to setup and get running. Now to the plants... All three Strawberry Gorilla's were germinated together and sprouted within 24hrs of one another. I did very minimal training on them consisting of leaf tucking and gentle bending of branches, then some LST using horticulture wire starting in Week 1 of flower, which all three responded well to. All three pheno's began to flower right around Day 24 from seed and continued for another 10 weeks. I kept the tent temperatures during veg and early flower between 76-80℉ with the light on, and 70-72℉ with the light off and the RH at 60-70%. Once in flower, I gradually lowered the 'light on' temperature to 72-75℉ and 65℉ during the dark period. I also lowered the RH down to 35-40% during late flower. The entire run they were fed Plagron nutrients exclusively, using their Cocos 'A' and Cocos 'B' along with Green Sensation. Power Roots and Royal Rush. I had nothing but great results from this lineup from Plagron and highly recommend their entire product line! I ended up with three distinct phenotypes, two of which leaning more to the fruity/strawberry side. The third pheno was Glue all the way, with a pungent, chem-like aroma that will make your eyes water! The #1 and #2 phenotypes took on some beautiful coloration through late flower, expressing shades of purple, pinks and lavender. Both of them also had a very fruity/sweet aroma that grew extremely strong during late flower. The #3 phenotype struggled a little bit during the run and was affected the most by the Fungus Gnats (which I'm sure affected her yield) but incredibly ended up not only being the most aromatic of the bunch, but also the frostiest! The #3's flowers were a lime green with hints of pink and lavender on some, all were covered in large headed trichomes! Once the Strawberry Gorilla's reached Week 8 of flower I began regular checks of their trichomes and once they had reached a ratio of 90% milky/10% amber I placed all three plants in darkness for 72hrs in the 4x4, keeping the temperature at 64℉ and a RH of 35%. After three days in the dark I chopped and hung the plants whole in the 4x4 suspended by a wire I ran across the tent. I kept gentle air circulation going in the tent and maintained a temperature of 55-60℉ and monitored the RH, keeping it at 50% for the first 24hrs, then 60% for the remainder of the hanging time. The first plant was ready to trim in 9 days, with the other two 10 & 11 days respectively. All three were trimmed and their flowers placed in Mason jars with a hygrometer inside to begin the curing process. The beautiful 'sugar trim' was sifted on my 24"x24" four screen setup which I did outside on my porch on a calm day that was only 38-40℉. I got a tremendous return of 42g of some beautiful 90u sift that I can't wait to press into rosin! All in all, having cultivated this strain previously I can say that the results could have been a whole lot better, but... taking into consideration my level of expertise with hydroponic growing and the stresses that the Strawberry Gorilla's had to contend with, I'd say that it was a win and a testimony to how resilient and strong this strain from FastBuds is... It's no wonder that Strawberry Gorilla Auto is a trophy winner!🏆

Buenos humos jardineros!!! Una semana más! Como podéis ver crecen sanas. Ya las podé y voy a abonarlas esta noche. Estamos sufriendo un poco el calor, pero vamos bien💪💪 Hasta la semana💚💚

She has grown about 10cm in the past two weeks showing signs of young stigmas no signs of deficiency the Fuel dog looks healthy for the hight she is. The fuel dog will not be fed anything until required. She stands at approximately 28cm

25/12/18 Week 5 Flower Merry Xmas! All 4 plants are doing well, growth seems to have slowed down so I think the next few weeks are just packing on weight and then ripening. Gonna give them all some pk 13/14 on Friday - had a small problem with fungus gnats in my bathroom which eventually led them into my grow tent. Been waiting extra long between waterings to minimize the chance of them spreading - I know they love wet, mouldy coco. Got some peroxide just incase they become a problem any way. Looking to chop 15th-22nd Jan, depending on how the trichomes are looking. Lots of users commenting on how much weight GZ packs on, really hoping to get some nice dense golf-balls. My previous grow, which was two plants yielded just under 1.5oz, would really love to see a yield around 2.5oz with my current 4 plant set-up. Merry Christmas - more updates in the new year!

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Not actually sure if end of week 5, I will check at some point maybe :P Removed 3 Hermies, will check think 1 wasn't random/"?". Pinched tops of pretty much all plants. Chopped the males up a bit, probably just remove them soon anyways, but some super early pollination would be okay I rate. Maybe try grow like, a carrot, pumpkin, between or where I removed males. Guess today I feed a lil bit and water well otherwise. About 700ml per plant now.

Been quite busy so missed a week on here... everything is looking great both responded really well to being topped not much else to say,.. defoliated abit of the bottoms after this video but yeah other than that roll on next week 👌

Trimmed a little more & started LST on day 67 with clips, first time using these, I'm pretty happy with them, even bent one stem to HST breaking & the clips supported the break. Runoff PPM is 2828 average, it will only go to 2000 on here.

This is my second grow. Started from seeds. 2 in big pots (I don't know the exact volume, around 30l-40l) and 4 in smaller 18l pots. I assumed that not all plants would grow nice so I thought it would be a good idea to start with 6 plants, and if they all grew I could give three away so that I have enough space (3 plants for 1 square meter). Problem was that the people that wanted the plants, could only take them in like week 14, and then they should already be in flower. Remember the word "should". So I sticked with 6 plants in a very confined space.. As described in the Video, this was before heavy defoliation. A few days later I flipped the light schedule from 18/6 to 12/12. At this point I had already done LST and a combination of FIMing and Topping. The two big ones and one small are Mandarin jam and the other 3 in the small pots are Super Skunk. I think it would have been a better idea to put them in flower earlier.

Esquejes

The weather was way better this week then last week. Days are getting shorter and i'll noticed she's getting ready to bloom because she's streching a lot! i'll guess she will show the first blooming signs at the end of this week.

Espero no sea demasiado tarde para ponerle unas guias, que me dicen?

I freaking love this plant. She's got dense buds already but she's throwing out pistils like no tomorrow. I'm curious to see how much bigger she's going to get in the next few weeks. Only a little over halfway done. She's already having trouble staying up right. I'm having to balance branches on other branches and using the ratchet hangers to keep the mains upright

Trotz Fehler wird getrocknetes Material gut denke ich. Wird jetzt ca. 2 Wochen bei 60% RH und ca. 17 grad Celsius trocknen

Quite happy with this run, cant complain really. We will see how it turns out once everything is cured.

I had a lot of fun with this grow and can’t wait to taste the final product after dry and cure!