Welcome to Green House Seeds Company Cup 🏆 Hey everyone 😊. A nice week starts before the harvest 😍👌. It smells incredibly delicious and looks beautiful. . You can see from the leaves that they suck their last energy out of the leaves 😉. There will be an update before the harvest 🙃, until then I wish you all a good start into the new week, stay healthy 🙏🏻 and let it grow 🍀🌱 You can buy this Strain and Nutrients at : https://greenhouseseeds.nl/ ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Green House Seeds Company Cup 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0

Dont member what day it is but all going well💚 Nute burns are under control, ph and ec pen are both broken so lil guessing game on that part .

U can see everything on pictures 💪 Ready for Harvest !!!! 💪

These girls seem to be doing well so far. How much water should I be giving them now? What nutrients should I be adding now? (I am using sohum super soil as the medium)

Start of week 4 8/23/25

🍊

Weeks 15 - It’s Ready - The 1st Gorilla Glue Is Ready To Be Havrest, I Gave It 3 Weeks Of Flushing And The Trichomes Of The Top Heads Are Most Cloudy With A Few Clear And A Little Amber Trichomes And The Bottom Buds Are Mostly Cloudy With A Few Clear And The Sceny Is Still At It’s Peak But You could Tell It Was About To Head Over The Morning And Start To Take A Downright Spiral I Will Be Hanging It To Dry For 7-9 Days At A Temperature Of 70 Degrees and 60% Humidity. The Slower It Dries The Better.

It's Flush Time! Officially in their 7th week - The last day of feeding was on 8/23 - They have been receiving water on their normal feeding schedules and plan on keeping this water regimen until it's over - I am anticipating some of the plants to finish before others. Cherry Gorilla x Sol Sonic #2 definitely (front left looking in the tent) looks as though she will be the first to finish. I think that the GMO (back right when looking in the tent) seems to be the late finisher - she will most likely go 9 weeks. As stated previously - super happy with the results of my first grow. I have to tip my hat to AC Infinity for their trigger system and their sensors - man they make it so much easier! As far as how all of the plants are going - all I can say is how proud I am to have cultivated these ladies and how much character and different traits they are showing this late into their cycle - each one seems to have its own unique smell - one smells much frutier, while another smells much more gassy. The GMO is on another level in terms of how she smells - I truly cannot wait to harvest and see how the smell changes during the curing process. Right now, she smells like GAS - with a hint of sweet. Out of all of the plants, I think I am the most happy with how the GMO has grown and how its buds have developed I am VERY happy that I took 9 cuts of the GMO and have them in Solo Cups currently, they are going into the tent as soon as there is room :) Appreciate the likes and follows!

Looking so delicious 😋 buds coming along nicely these girls are getting so frosty and giving off a sweet creamy lemon smell. Full trichome heads everywhere this week (still all clear of course) Buds getting denser and stickier by the day can’t touch them without my fingers sticking together. Did a heavy defoliation and a little more lollipopping earlier this week..I’m more than impressed with these genetics! Even with the tent closed I can smell them from the next room already. - Day 47 update I just bought a Blue Lab ph pen and some Terpinator at my local Hydro shop and they gave me some free Dyna Gro mag pro so I will be adding both to my feeding schedule.

Week 10 Flower week 4 Flower-day 1 05/11/2025 Nutrients change Floramax veg1 Floramax Organabud Floramax flowering enhancer Floramax Rezin Cyco platinum series silica Green planet bud booster Complete grow cal mag ( sensi unfortunately got refunded so got this instead today ) Sleeps with the fishez ( hocI ) Ladies are looking good overall, let the fun goodness begin i guess 7/11/25 Blockage within systems finally fixed after 4 flushes. Not exactly sure what it was but whatever ive done has fixed it for now 🤷‍♂️😂 take it as a win for now i guess 11/11/25 I hate scrogging so I decided to take it off. Ive got lst on a few places to help bring the middle up a little more then will drop the lst off again and leave her be. Ive tried scrogging multiple times throughout the past few grows and I just don't like it

Green sensation made its effect and now we can see some resin dropped in the flowers. They have also gained some weight and size. The plants keeps looking good and healthy at the moment.

First week is over. Overall it going well. 4 of the 6 plants are excelling; super boof auto and gorilla z auto). The 2 strawberry gorilla autos are not doing very well. Right now for strawberry gorilla, I believe some of my issues may be genetics specific. Both plants exhibit same issues. Each one is in a different medium. The only constant is strawberry gorilla auto genetics. I am going to continue growing them for another week to evaluate options. One I am fairly sure is going to die. The other, while overall looking terrible, has some new growth starting that is a better healthier green. Hopefully it is just a rough first week. But these are autos. A rough start usually means a rough entire grow. Not necessarily that they will keep having issues, but due to short fixed veg time frame, these 2 have significantly lost growth time. The DIY IoT automation side of this grow/project is progressing nicely. I worked on the PAR sensor and have no deployed it for its first 24 hour “soak test” to ensure optimal operation for 24+ hours. If the soak test last, it means it’s pretty much ready to be deployed. The PAR sensor is quite good if I am being honest. I was able to verify my ss550 LED at ~1000 umol/s it is rated for at a specified height. Now is when these sensors start providing real value. First week of growth always requires low light levels/high light height to accomplish providing somewhere around 150-250umol for seedlings. Without the PAR sensor to use at the beginning, I do what I always do and adjust height and light levels. Unscientific, but it’s how most growers are doing it due to PAR sensors like apogee for the dli500/600 PAR sensor starting at 5+ and anything below this range usually is not a true PAR sensor and no longer of value outside of “consistency” checks. They are lab grade, they are meant to be, this explains their price. Apogee and other comparable sensors are also spot checkers. They are used to check, validate and log, but they are not meant to do it fast or at a rate that is useful beyond average DLI. They can’t be integrated into automation systems. They largely are siloed devices that work alone and must manually transfer logs for analysis. The Dfrobot PAR sensor is a real time, continuously polling, connected, that can be interacted with in real time and used to control automation. It is also industrial grade with ip67 rating compared to apogees ip65 (it’s a spot check probed not meant for automation integration). Basically, apogee are amazing sensors, but they fundamentally are unable to do what I want. This Dfrobot par sensor, while not lab grade, is nearly lab grade, which in turns bring the sensor significantly down in price compared to a “lab grade” sensor that cost 4x. I am not a researcher or a scientist. Lab grade is amazing, but I literally cannot abstract additional value for the statistically significant accuracy difference (remember statistics and our p value, statistically significant is often a very small number , but in the real world, it does not matter since I am not doing actual research nor needing perfect controls with only a single variable change. I am only one person. ;) Uhh… I think I got lost on a tangent, ultimately PAR sensor confirmed 251 umol/s, which is the maximum these should be getting. But 4 are thriving, 2 are not. I’m not adjusting the lights for the 2 struggling to the detriment of the others Now that the PAR sensor is running 24 hour soak test and about to be deployed full time, I’ll be focusing on the other two sensors; the 4 in 1 soil (ec, ph, soil temp, soil moisture) sensor and NPK sensor. All three of the sensors mentioned are connected by a single Ethernet wire for communication and power to simplify deployment. The 3 sensors will ultimately plug into a shared hub that allows for easy plug n play for these sensors and future ones. Hopefully by next weeks post I’ll have full logging of all sensor data to my timescale database which will store all sensors logged data for future analysis.

Day 38- 18/01/22 and we are now in flowering everything is looking good I’m still cutting down the plants from my last grow Afghan kush and once I’m done with that I’ll be moving everything that isn’t chemdawg into the HPS tent!!! Day 41-21/01/22 plant is finally in the hps tent and doing well!!!

Dark purple buds and frozen cola Finish in 67 days She needs normal light and feeding

Just started giving it Veg nutes but not too much and did some lst

Day 22 Took off lower three nodes of side branches on each main branch. Removed 4 leaves

This week I just let them do their thing. They seem to be bouncing back after the transplant I did last week. My OCD is getting to me though with the uneven canopy. They seem to be happier tho so I’m happy.