Likes
Comments
Share
Die Pflanzen sind buchstäblich in der Woche explodiert. Das Volumen hat sich geschätzt verdoppelt. Die Sanlights sind auf 85 Prozent. Ich werde in 2-3 Tagen die Lampen für 2 Stunden am Tag auf 100 Prozent drehen, um nächste Woche richtig Vollgas geben zu können. Die Luft ist zum Glück sehr CO2-haltig. Die Luft liegt stundenweise bei circa 1200 ppm, im Minimum sind wir da bei circa 800, was für die Pflanzen ganz gute Werte sind. Ich habe mittlerweile einen Honeywell-Lüfter auf Stufe 2 hinzugeschaltet, um Schimmel zu vermeiden. Der Lüfter läuft jetzt auch mit AKF, den ich die Wochen davor nicht benötigt habe. Die Pflanzen bekommen weiterhin 3 Mal in der Woche CalMag (1 ml auf 5 Liter Wasser). Seitdem habe ich keine Probleme mehr mit braunen Blattspitzen. Die Pflanzen haben alle die gleiche schön dunkelgrüne Blattfarbe. Die Feuchtigkeit und Hitze, die die Box produziert, ist unerträglich. Die Stoftöpfe lassen gut verdunsten, bin aber trotzdem sehr zufrieden. Ich bin der Meinung, dass die Pflanzen in den Töpfen einfacher zu groß sind. Genaue Informationen füge ich den Bildern der einzelnen Pflanzen hinzu, um das besser erkennen zu können, was was ist Stichpunktliste: - Pflanzen sind explosionsartig gewachsen - Volumen hat sich verdoppelt - Sunlights auf 85 Prozent - In 2-3 Tagen Lampen auf 100 Prozent für 2 Stunden täglich - Luft ist CO2-haltig (1200 ppm, Minimum 800 ppm) - Honeywell-Lüfter auf Stufe 2 gegen Schimmel!!!es ist kein Schimmel vorhanden es geht um Prävention!! - Genaue Informationen zu einzelnen Pflanzen werden hinzugefügt - Lüfter läuft nun mit AKF (vorher nicht benötigt) - 3 Mal wöchentlich CalMag (1 ml auf 5 Liter Wasser) - Keine Probleme mehr mit braunen Blattspitzen - Schöne dunkelgrüne Blattfarbe - Unerträgliche Feuchtigkeit und Hitze in der Box - Lüfter von 40 auf 70 Prozent um Temperatur zu senken + LF - Stoftöpfe lassen gut verdunsten
Likes
9
Share
Day 39 she’s huge very very happy with the way she is turning out. She’s exploded and very large and in charge. I’m stoked on her.
Likes
Comments
Share
@jporfiado
Follow
Esta semana aplique la tecnica lst. Hubiera preferido hacerlo antes pero estaba esperando por que antes queria trasplantarlas. Pero no he podido comprar macetas, ni el medio de cultivo. Entonces decidi hacerlo en las macetas actuales para comenzar a guiar la planta, ya que va creciendo muy rapido. Junto con la tecnica lst tambien hice defoliacion a todas las plantas. Comence a regar con fertilizante en polvo Green House para la etapa de vegetacion. Uso 0.5g / 1L . Ocupo unos 2L para regar cada planta.
Likes
20
Share
Que pasa familia, última semana de floración de esta farm cheese de genofarm, y que decir, es increíble vaya aroma y vaya flores repletas de tricomas. Lleva su limpieza de raíces ,después se controló ph temperatura y humedad todo el cultivo, de principio a fin. Variedad de 10 para trabajar en indoor, ideal para SOG .
Likes
6
Share
Llegamos al final, este apartado lo finalizaremos cuando probemos la yerba de momento colores rojizos y azulados, huele como a gas junto un transfondo dulce...una pasada merece la pena probarla!⛽🔥
Likes
3
Share
The stretching was going all throughout Week 4 and into Week 5. One plant has reached 32" tall from where it sprouted and the other has reached 28" tall. Both plants are starting to show trichomes, the taller one more so. Feeding has been every other watering which I've found to be every 3-4 days. I'll be out of town starting on 02/03/2024 and coming back on 02/16/2024 and have asked my friend to stop in and water/feed when the plants need it. If everything goes well, I'm going to be excited to see how these girls have progressed in the 2 weeks I am gone.
Likes
91
Share
@MrCOCO
Follow
On day 15, I defoliated the girls. The girls are growing up like crazy, they have already doubled their height. Everything is going well, I'll probably have to do supercroping in the following days ...
Likes
18
Share
week intel: its time to harvest some of plants the ones that is mature enough. indica dominant plants will done first always so we should harvest them first because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. indica dominant plants will get done 1 or 2 weeks sooner than sativa dominant plants that will often takes more than 8 weeks so be aware to harvest them sooner. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
68
Share
@Ferenc
Follow
Day 44, 30th of October 2020: Here we go I am back from holiday this girl grew a lot. The first 6 pictures before LST and the rest is after picture. I switches the light to 12/12 from tomorrow and leave her in darkness for one day from now. She has got already some smell also... ;) I have ordered and extraction fan kit so with filter it will be used soon. Next week starts more intensive fertilization as well :) Let's start to flower hahaha :) Happy Smokes ;)
Likes
5
Share
@Naujas
Follow
oh our nature :) 3 weeks ago there was a huge flood in this place which took away 4 girls :( this time it seems like a drought and high temperature 30-35°, but I believe everything will be fine :) the girl looks good,.
Likes
6
Share
@Lukewarm
Follow
Decently shitty grow. Lets see what happens till flowering. 5th october: 2 litres for each pot Started lsting them today .
Likes
34
Share
***** Week 10 growth - February 13 to 19, 2021 - Week 2 Flower ***** Mandarin Mimosa is certainly growing beautifully!!! MM1 has been strong and a taller grower from the start. MM2 however has taken off in stretch.......she is also being grown in a 3gal pot so she will be slightly smaller than MM1. These are 1:1 girls but I am really looking forward to smoking this strain😍👍 The terps should start coming out more over the next couple of weeks, Terpinator being added now as well to assist with aromas. Tips up on these girls almost all day long, they are the happiest in the tent this week😂😂 2nd SCROG layer in now....finally😞 Lots of work to do in cleaning up the lower leaves next week. Will do larger leaf strip and lolipoping when they start focusing more on bud development. Light is at 24” only pulling 310 watt, and the meter at the tops of the girls is roughly 28,500LUX. It is feeling like it’s a little strong for them but it’s close......the curling leaves is slowly increasing on the tops. By the end of the week we are at 400watts and reading 38,500LUX, this should be roughly 980 umol/s/m2.......over 900 and less than 1,000.......should be good for going into week 3. Nutrients switched over to flower schedule and following week 2.....but so-called back a couple of items. Adding some other items beyond IPP line so backing off some of the ppm to compensate. Still only one “feeding” per week. Early flower so hitting the microbes a little harder this week and next and then slowly start backing off. I like Remo’s Natures Candy for sweetener because it has humic, sweetener and old school molasses, amongst other things to feed the microbes as they are in coco. Bud Fusion being used now for pk boost.........no more “red kool-aid”😂 Still adding Rezin from Green Planet becuase it seems to boost my trichome quantity.....Terpinator likely this week as well......increase some of the sulfer to increase aromas. Little more detail....... Feb 13/21 - Day 8 - 3.5L watering with CalMag @ 1ml, Nature’s Candy @ 1ml, Resin @ 1.5ml Feb 14/21 - Day 9 - 2nd SCROG added today.....finally. Plucked a bunch more leaves in the process - watering with microbes only today. Recharge has some molasses in it so just adding that. - 4L water for these girls with Recharge @ 1/2 tsp/gal - 320ppm and 6.0pH Feb 15/21 - Day 10 - today is big feed day....its been 7 days. - 3L each girl with all the IPP line as listed plus silica @ 1ml, Nature’s Candy @ 1ml. (Bud Fusion was 0.2gr/L) - 1325ppm and 6.0pH - Girls gave run off at 3L today so didn’t push past that. Feb 16/21 - Day 11 - some feed left from yesterday so added 6L of plain water to dilute it and watered into the girls tonight. - 3L full feed of nutrients for each girl - 800ppm and 6.1pH Feb 17/21 - Day 12 - 3L each girl with Terpinator and CalMag @ 2ml, Nature’s Candy @ 1ml, Recharge @ 1/2 tsp/gal - 775ppm and 6.1pH - increased light power to 350 watts. Now at 32,500LUX.......take it slow over the next week and keep creeping up. Leaves have a bit of a taco shape coming out and looking fairly serrated at the edges.....pushing the light intensity on the tops👍 - leaf colour on the girls is very good......tips are not burnt either. Feb 18/21 - Day 13 -3L each girl of plain water today - added beneficial bacteria and enzymes @ 1.5ml - 330ppm and 5.9pH - was looking for a little lower pH as I have not been checking runoff. - have to do a leaf strip this weekend......start of week 3. - light power increased again, 400 watts now. Feb 19/21 - Day 14 - day out day.......they have not had one in a bit. - humidity was higher today as door to grow room closed today to assist clones with more humidity. So that takes us through two weeks of flower now. Not knowing these girls enough yet, I suspect feeding will stop at the end of week 6. That leaves four more weeks. I will treat the next two weeks like mid flower for nutes, and the following two weeks as late flower. Feed supplements accordingly. These two girls are very happy and looking like we should get some nice colas from MM1!! They are rocking ETS.......looking forward to seeing the bud swelling next couple of weeks💪👍👊
Processing
Likes
10
Share
Woop happy with how the grow is coming along had fun trimming the girls down shitting myself at the same time though😝 still on an 18/6 schedule as I didn’t want to over stress the plants following defoliation and scrog . Scrog setting up wasn’t too bad hope I done it right 😅 the screen is slowly becoming very green haha .. I’ll keep looking around on the web to widen my knowledge but for now it seems all is good my plan is to switch to 12/12 starting week 6 and around this time I should look into adding bloom to feed the autos as I’m sure they’re in pre flower stage right now but if ever in doubt I shall ask Some cool photos to look at as well Happy growing ☠️
Likes
1
Share
1 more week to go for the chop amazing pine and lemon smell
Likes
14
Share
@Pennuts
Follow
The drying process lasted 14 days and I'm in the 2nd week of curing, I've already tried some buds and neither the smell nor the taste are great, the taste and smell of both phenotypes is lemon.
Likes
38
Share
@kijani
Follow
she is still branching, so i realized she needed ore space and put her out in a larger 4x4 tent as compare to the orignal 2'x2'. the tent has more cmlights then the single one in the smaller tent - this made the girl start to uptake nutrients such that there is very little drained to waste. i also put a screen to start scroging over her. the screen has large holes, so i think it may require high stress training to move the stems to the next section without breaking them. the data from grow rooms sensors etc gets overwhelming quickly and i can't really keep up. so i created a graphical animation visualizing for the composite garden data from the live garden sensor data. this is fun as things on the dashboard change colors and shape based on the sensor status. it is also interactive as i can also send commands to say control the lights, pump by clicking on them on the animation. . i am still using my doser to mix nutrients and then refill this garden manually. besides the plant response to the increased lighting , all other conditions i can adjust are still similar.
Likes
6
Share
A very cool strain to grow 😀👌 4 on 4 germination rate gave me 4 nice and robust plants. One plant was taller and different from the 3 others one. The red one was a real beauty 😍
Likes
25
Share
@m0use
Follow
Weeks been chill, plants are not drinking as much as I thought they would be. Still annoying to water them separately with PH'd shit, some days I just give them tap and say fuck it. Can't say they are doing the best they could be doing. Been to busy with other things to give them the full attention they need for a first time liquid feed grow. Really should have done this indoors but I hate running a tent in the summer when the sun and heat are free. Granted the tomatoes are blocking some of their sun, have to move them aorund. been meaning to do that but no where to put them where they won't block out some other plants. Been having some fun making the little videos each week, been using open shot video editor to mash it all together and it works quite nice. Few crashes here and there as this laptop is garbage. It has so many features that I am not fully utilizing like cuts and effects but I've kept it stupid simple. Bugger one of the videos did not upload into the diary. Annoying AF these things take forever to "resize/convert" I like how the dead Blue Cindy plant looks like a biophage, sifi like alien thing.
Likes
435
Share
@Ju_Bps
Follow
For this grow I've used, For the growth 1 Mars Hydro TS1000 (150 W) 2 fan 15w 1 extractor 150mm 350m3/h 1 carbon filter 150mm 1 Hydro Shoot 60x60x140 1 timer 2l plastic pot. 18 Hours On, 6 hours off light For the soil I've used plagron light mix + RQS pellets For the blooming 1 Mars Hydro TS1000 (150W) 2 fan 15w Extractor + Filter 150mm 1 HS60 box 1 timer 11l pot 12/12 Plagron batmix + RQS Pellet After harvest, I've put the stuff in a room with 1 fan 15w Thanks for all my friends! And again thanks @News_SweetSeeds , and Mars Hydro, @Coco_Pan2022 ❤️❤️❤️