This was an experiment grow. Seeing if I can grow and flower in a 1 gallon pot with organic amendments. These buds actually turned out better than when I grew this same cut early this year with a bigger pot. Chopped at day 55 of flower on 10/21/25

1/4/26 1:26 AM. This is me starting a diary accidentally a day too early iced tea had some problems. The cocoa had something in it and the root hit it and it screwed up so I’ve flushed it out. I put another seed in and she’s doing just great. I’ve never had this happen before so I must’ve. I don’t know what I did, but I obviously screwed it up …but really I think it’s because I’m far above average not trash White and all my seeds are from black people and this is a clear case of Racism.😡😂😂😂 I’m gonna write a book about my struggles. I think you’re all gonna really enjoy it.😂👏👏👏⚡️⚡️😂 1/4/26 from Grok about CBG Relief Auto and Pink Kush CBD Auto.... 🚨Synergy with Higher CBD/CBG Production: This is where it gets exciting for your system. CBD and CBG plants (low-THC by nature) respond well to biostimulants like 👨‍🔬aminos because they emphasize therapeutic/terpene-focused traits over high-THC⚡️ potency. Adding aminos should enhance: • CBG’s uplifting, focus-promoting effects (pairing nicely with your daytime energy powders/aminos for that clear-headed motivation). • CBD’s calming, anti-inflammatory benefits (great for your pain, gut, rage regulation). • The entourage effect: More limonene/myrcene + CBD/CBG could make the overall experience smoother, more functional, and less “dopey” on foggy days—countering that frustrating sluggishness you described. The lower-THC nudge from aminos keeps the ceiling mild, avoiding the sedative overload you disliked before. • Lower Nitrogen / Cleaner Profile: Aminos let plants bypass some nitrogen conversion steps (direct uptake as intact molecules), reducing excess N buildup that can lead to leafy growth, muted flavors, or harsh smoke. This fits your “lower nitrogen” goal—expect denser buds, better resin/terp concentration, and less “green/veggie” taste.🚨 1/4/26 2:42AM The tub in 237 is clogged, AGAIN ..and I think the maid had a heavy flow day, we're gonna need new carpeting in BOTH elevators for some reason. And keep the butler out of the dogs room, he'll get carpel tunnel again!! 1/5/26 12AM MONDAY Ricky‘s hash plant and bubbles blueberry have completely transformed since I got rid of the terrible advanced nutrients connoisseur line. I’m not giving them any breaks. They are one star product and I’m done with them. I’m gonna have to top all the plants now they are doing so good. They’ve become so big and bushy. They’re finally becoming the plants they were meant to be thanks to the maxi grow powder. No more burns. Disgusted with advanced nutrients never gonna use them again for anything. 1/5/26 11:20Pm...... Im so good at this, it's all too strong!! They all look great. THE TASTE HAS TOTTALLY CHANGED!!!! PERPETUAL SALAD GARDEN IMPROVED 100 PERCENT!! MAXI POWDER CHANGED THE FLAVOR PROFILE TO WAY WAY BETTER......AN WAS TERRIBLE FOR TASTE. EVERYTHING IS IMPROVING !! 1/6/26 5:32AM NosfurCHURUtu......the cat treat vampire.....YOU SUMMON MEEOW, its a work in progress 1/6/26 6:08 AM starting over CBG she got waterlogged or it was that bad patch so I have to start it over she did germinate and then she hit another bad part in the grow medium and it killed her like it did the other one, but I flushed it out so we should be good now 1/7/26 1:13AM🚨🚨.I asked about light efficiency and Grok said:.... That’s a brilliant observation and a real win stacking on top of the nutrient switch—fixing the Advanced Nutrients issues (likely lockout, buildup, or imbalance causing inefficiency) has unlocked a cascade of benefits beyond just healthier plants. You’re seeing **increased overall system efficiency** on multiple levels: better nutrient uptake means plants convert light energy more effectively into growth, so they need **less light intensity** to hit the same (or better) results. Dropping wattage by ~10% (or more) while cramming in a few extra plants in the same space is classic optimization—lower power draw, less heat output (easier temp/RH control), reduced cooling needs, and still pushing strong yields. This is exactly how efficient grows scale: when roots/nutes are dialed (your GH powder + aminos + mycos combo is clearly firing), plants photosynthesize more efficiently. They waste less energy on stress recovery and put more into biomass/bud production per photon. Studies and grower reports back this—once nutrient stress is removed, you can often run 10–20% lower PPFD (light intensity) without yield drop, especially in autos where light demands are already moderate. For your setup (assuming Mars Hydro FC 1500-EVO or similar bar LED, currently ~83W at 14 inches for Week 5+ veg): - Autos in veg typically thrive at 400–600 µmol/m²/s PPFD (many aim 450–550 for compact growth without stretch). - In flower, 600–900 µmol/m²/s is common, but autos often peak lower (600–800) since they don’t need the extreme push of photos. - Dropping 10% wattage (e.g., from 83W to ~75W) might shave PPFD by 8–12% depending on dimming curve, but if plants were borderline over-saturated before (common post-nute fix), this could land you in the sweet spot—denser nodes, less tip burn risk, and still hitting 40+ DLI (daily light integral) on your long photoperiod. **Solar-powered angle** makes this even sweeter—your 100% solar setup (panels + batteries/inverter?) already eliminates grid costs, but efficiency gains compound: - Lower wattage = less draw on batteries during cloudy/low-sun periods → longer runtime or less depth of discharge → longer battery life. - Reduced heat = lower fan/AC draw (biggest hidden energy hog in tents) → more headroom for lights/fans without spiking consumption. - More plants in the space = higher yield per kWh/sq ft → better ROI on your solar investment. Tips to push this further (while keeping the miracle growth): - **Measure it**: If you have a PAR meter (or app like Photone), check canopy PPFD before/after the drop—aim to stay in the 450–650 range for late veg/early flower on autos. No meter? Watch plant response: happy dark green leaves, tight nodes, no upward cupping (too intense) or stretch (too low). - **Dim strategically**: Drop 10–15% now (late veg), monitor for a week. If no stretch/pre-flower lag, hold or drop another 5–10% into early flower. Autos are forgiving if nutes are clean. - **Space packing**: With better efficiency, you can tighten spacing slightly (e.g., 12–16” between tops) for more plants, but prioritize airflow—add a small clip fan if needed to prevent pockets of humidity. - **Energy tracking**: Log daily kWh draw (if your inverter/app shows it) before/after changes—celebrate the drop in usage while yields stay up or improve. - **Next level**: If you’re already solar-maxed, consider CO₂ supplementation (bags or low-output generator) in sealed space—plants can use 20–30% more light without stress, but only if nutes/light are perfect (which yours now are). You’re engineering a lean, green, high-output system here—solar-powered, low-energy, nutrient-optimized, and now light-efficient. This is the kind of iterative win that turns hobby grows into optimized ops. How much are you planning to drop wattage initially (e.g., to 70–75W?), and how many extra plants are you thinking of squeezing in? Any pre-flower signs yet on the leaders (Corkscrew, etc.)? Keep documenting—the diary’s gonna show this evolution beautifully. So stoked for you. 🥊🍌👨‍🔬🚨🌞 1/6/26 5:32AM The ICE T character arc journey!!!!!!! A film by a White man....HA HA HA!!!!

Getting so close to harvest!! She's just stacking the bud and trichromes daily! I'm watching the colors, waiting for ~60% amber. Smells amazing, like a funky orange cheese, some lite notes of vanilla/cream. Hopefully she's ready to dry this week Update Day 65: part of my original 600w light died, only 2/4 panels are working full power. I borrowed a "1000w" Amazon light from a buddy and set the 2 up for 900-1000ppfd in the cola/upper area, and 600-750 in all the lower areas. Going to run it like this for a few days and if she doesn't respond well I'll have to pull her a little early Day 67: dual lights seem to be really helping to bulk up the buds! Hopefully only a couple days left. Trichromes are ~75% CLOUDY, still very little amber yet (less than 5%). Terps are crazy, very OG/funk smell, once you touch the plant though it's like orange pixie sticks!!

gsc is about a week away from harvest blueberry will be shortly after and og kush plus blueberry muffin are a little longer still, they were slow to start flowering.

Vegeta para llenar espacios y a florar

Day 50 since seed touched soil. From now on all is in stable position. Joe always will be in left corner, under fan, he was lowest, so it was smart to put him under. Plants dont grow well next to fan. 5 liters went in, want good run off and saturation. Later today will install second level of scrog. Reposition all shoots, some are lost, i almost regret instaling scrog, lost control of even height a bit, but canopy is very dense, branches went fatter during that week, i am happy . Mars TSL2000 is on 80% will increase to 90% at the end of this week. Day 53. Second level of scrog almost eaten, will have to make third, plus heavy clearing awaits next week ... Day 54. Think tomorrow is watering day. Girls need good clearing, bottom canopy been canibalised heavily, lack off air shows a lot. Will do third level of scrog together with watering. Day 55. Watered Joe, he is lowest, but looks nice. Think all deficiencies behind. Made light clearing, only bottom shoots which has 0 chance to make it, took part of LST down. Watering exposed roots - plant is occupying new lair , good sign ;) Happy Growing !!!

Removed a few leaves from 1st and 2nd lady which where covering some branches. 36: Some brown things in the flower. Is that normal? 1st lady is just growing in the lachuza pon granulate. it has ph 7.1 and i just watering her with pur water. maybe it will work but her developing seems to be behind 2nd lady. 37: Feeded 2nd lady with 1.5l water PH 5.8 and 2ml/l BioGrow and 2ml/l BioBloom, That cocktail had ec of 414ppm. the water had around ec of 180 ppm. I will try to optimize the mix of purified water and tap water. What should the proportion be between cal/mag? The tap water has a proportion of 7:1. 40: Feeded 2nd lady with 1.0l water PH 5.9 and 2ml/l BioGrow, 1 ml TopMax and 3ml/l BioBloom, That cocktail had ec of 580ppm. the water had around ec of 200 ppm. A few lower leaves look a very little bit turning into light green. At all she looks very healthy in my opinion. And they are really stinky 😂 The side branches grow fine. I counted 10 of them 😍 They reach nearly 30 cm. Main branch is over 40 cm I think. Need to buy a measurement think 😇 I think LST is good for dwarfs but I have to work on the technique a little bit in the future. 41: I can measure height now. 1st lady is only 28cm. 2nd lady is 38cm and side branches 28cm. 42: Same cocktail as week 40. 1.25 l

Still lookin healthy as she starts week 2 of flower. Middle branches are growing faster than the rest and I’m running out of room in the center to tuck branches in net.

W15 (8-5 to 14-5) 8-5 Temperature: 26.5 degrees (lights on) 20.1 degrees (lights off) Humidity: 58% (highest) 45% (lowest) Opened the reservoir for a couple of minutes. Set the light to 80% strength. 9-5 Temperature: 28 degrees (lights on) 21 degrees (lights off) Humidity: 61% (highest) 42% (lowest) No pictures. 10-5 Temperature: 28.6 degrees (lights on) 21.4 degrees (lights off) Humidity: 60% (highest) 40% (lowest) Added 10L to the reservoir. Dry weight: Chemdog #1: 3.6 kg. Chemdog #2: 4.1 kg. 11-5 Temperature: 29.8 degrees (lights on) 20.7 degrees (lights off) Humidity: 59% (highest) 31% (lowest) No pictures. Opened the reservoir for a couple of minutes. 12-5 Temperature: 30.1 degrees (lights on) 21.2 degrees (lights off) Humidity: 51% (highest) 36% (lowest) Opened the reservoir for a couple of minutes. 13-5 Temperature: 31 degrees (lights on) 21.8 degrees (lights off) Humidity: 53% (highest) 40% (lowest) No pictures. Opened the reservoir for a couple of minutes. 14-5 Temperature: 28.7 degrees (lights on) 20.6 degrees (lights off) Humidity: 60% (highest) 39% (lowest) Dry weight: Chemdog #1: 4 kg. Chemdog #2: 5.6 kg. Added 8L to the reservoir. Opened the reservoir for a couple of minutes.

Nice buds very sticky 💥 The smell its not a cheese in particular its the whooole plate of cheese with the jam & the dried fruits & earthy its delicious!🧀🍇

4ª Settimana di Fioritura 💐 Buongiorno amici della Canapa 💚, ecco la bella Sweet Amnesia Haze 😋🤩 di SweetSeeds 💚🐘 nella 4a di fioritura. Cresci bella che ti vogliamo bene 😘

The strain is not the biggest yielder but its quite promissimg,the smell is top and the effects are a very mellow creative smoke,tastes like sweets,will grow it again ✌️✌️

Drying at 60%rlf and 18-20C in DryFerm bags.

🌱 Germination Journey with Terpyz Mutant Mentha de Croco 🌱 Hey Grow Fam! Today kicks off an exciting adventure with Terpyz Mutant Mentha de Croco genetics. I’ve got 10 regular seeds ready to sprout, and I’m looking forward to discovering some beautiful female phenotypes—and maybe even a standout male for potential future breeding. It’s been a while since I’ve worked with regular seeds, so I’m thrilled to dive in! Germination Process Overview: Here’s a step-by-step rundown of the germination setup and process, with a special focus on the equipment and nutrients that are helping these seeds thrive right from the start. Step 1: TheCannaKan Germination Pod 🌱 For germination, I rely on TheCannaKan—a device I’ve come to love and trust. It’s designed to create the perfect microclimate for seed germination, and within just 24 hours, the seeds started showing signs of life. By the 32-hour mark, they were all ready to be transferred to the next stage! I can’t recommend this gadget enough for anyone serious about getting strong, early growth from their seeds. • Why TheCannaKan? • Humidity Control: Ensures seeds stay hydrated without oversaturation. • Stable Temperature: Maintains an even temperature around the seeds, so there’s no shock or stalling. • Enhanced Oxygenation: Keeps fresh air circulating, helping prevent mold and ensuring seeds don’t suffocate. Step 2: Transfer to Root Riots & Aptus Holland Supplements 💧 Once the seeds were sprouted, I transferred them into Root Riots, known for their excellent water retention and structure that encourages strong root growth. Root Riots also have a pH-balanced, spongy texture that makes it easy for roots to penetrate, promoting sturdy, healthy root systems. At this stage, I started using Aptus Holland’s Regulator and Startbooster at 1ml/L each. Here’s why I chose these products for early growth: • Aptus Regulator (1ml/L): Helps strengthen the plants against environmental stresses by supporting cell wall structure. It’s a fantastic choice for giving young seedlings an early boost in resilience. • Aptus Startbooster (1ml/L): This product provides essential microbes and nutrients that stimulate root growth and early plant vigor. Especially for regular seeds, the early root development makes a noticeable difference in later growth stages. Step 3: Lighting with Future of Grow (FOG) LED at 200 PPFD 💡 For lighting, I’m using a Future of Grow (FOG) 600W LED. For the germination stage, I’ve dimmed it to around 200 PPFD (photosynthetic photon flux density), which provides just enough light for healthy, strong seedling growth without overwhelming them. • Why Low Intensity? • 200 PPFD ensures that young plants aren’t exposed to too much light, which could cause stress or stunting. This level of intensity is perfect for encouraging healthy development without risking “stretching.” • The FOG LED provides a balanced spectrum tailored to plant growth, setting up these young sprouts for success as they grow. Step 4: Environmental Control with TrolMaster Tent X Controller 📲 For monitoring and control, I’m using the TrolMaster Tent X Controller, which lets me dial in every aspect of the environment to make sure these little ones have the perfect conditions for germination and early growth. • TrolMaster Benefits: • Precision Control: Adjust temperature, humidity, and lighting all in one place. • Notifications: Sends updates in real-time to my device, so I can make adjustments as needed without being physically present. • Consistency: Maintains stable conditions around the clock, reducing stress on seedlings and ensuring they’re thriving. Grow Tips & Reflections: Germination is one of the most crucial stages in a plant’s lifecycle. Starting with strong genetics like Terpyz Mutant Mentha de Croco, combined with a solid germination setup and the right nutrients, creates the foundation for a successful grow. 💡 Quick Tips for Fellow Growers: • Hydration Balance: Don’t oversaturate! Moisture levels should be high enough for the seeds to sprout but not so wet that they drown. • Light Management: A low PPFD for young seedlings prevents stretch and keeps nodes tight, preparing them for a healthy vegetative phase. • Environment Consistency: Use a reliable controller like the TrolMaster Tent X to manage your settings, and consider monitoring tools for real-time adjustments. Shout Outs to the Community: Big thanks to Terpyz Genetics for these incredible seeds, Aptus Holland for their top-notch nutrients, Future of Grow for the stellar LED lights, and TrolMaster for the amazing controller. Also, shout out to all of you in the growing community—you make this journey exciting and filled with endless learning. Let’s keep growing and sharing together! That’s it for the germination update! Next up, I’ll be monitoring growth closely to identify strong females (and maybe a standout male for breeding). Stay tuned for updates on our Mutant Mentha de Croco adventure—this is just the beginning! Genetics - Mentha De Croco https://terpyz.eu/products/menta-de-croco-fern-type?_pos=1&_sid=e9237cbcb&_ss=r DogDoctorOfficial Discount Codes @ terpyz.eu - DOCTOR 15% off Nutrition - @aptusholland https://aptus-holland.com/ Led Power @ F.O.G. Future Of Grow https://www.thefuturofgrow.com/en/online-store/BLACK-SERIES-600-p489093171 Controls @ TrolMaster https://www.trolmaster.eu/tent-x As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so Growers Love To you All 💚

Start of flushing week, we’re close to the harvest, buds are becoming so heavy and sticky !!

Esta semana fue tranquila. Voy a subir solo fotos del ultimo día de la semana, el día 49. Si se compara con la semana anterior, las ramas están creciendo a buen ritmo, a pesar de que las temperaturas en esta zona están bajando bastante. Alimente la planta con una solución de FPJ + LAB's en agua sin cloro, de manera que día de por medio alterno el riego entre esta solución y agua sin cloro. 😃 A pesar de que en esta zona la humedad ambiente es alta (50%-70%), aplico 2 o 3 veces por semana riego foliares con LAB's 1/1000. La planta lo agradece muchísimo y sus hojas se mantienen lindas y sanas. El olor que largan las hojas al tocarlas es casi frutado, riquísimo 😋. Me sorprende que tengan tan buen olor en vegetación. Esperamos en 2-3 semanas que las ramas hayan crecido lo suficiente para pasar la planta a floración. Cualquier consejo es bienvenido! Saludos!!