Alrighty, the fun part’s over—now it’s time to dial things in. The plants seem to have used up the nutrients in the soil and now require a different feeding approach for the flowering stage. But hey, you’ve got to grow to know, and the fix is simple. From now on, I’m fertilizing once a week with BioBizz organic nutrients, following the provided feeding schedule. I’m sticking to the basic components only. I’ve also added some calcium and magnesium, as the lower fan leaves are showing signs of deficiency. Since the plants have become quite bushy, I pruned the lower third over a few sessions—spreading out the stress and avoiding cutting too much at once. Lastly, I’ve set the oscillating fan to medium intensity to prevent stagnant air. The duct fan is now tuned to maintain a VPD between 0.7 and 0.8 kPa.

Day 76: Watered the plants 0.5L with nuts 909 ppm, 1921 us/cm, PH 6.4 Day 79: Watered the plants 0.5L with nuts 875 ppm, 1861 us/cm, PH 6.4 Day 81: Watered the plants 0.5L with nuts 864 ppm, 1831us/cm, PH 6.4 Flushed one plant with 10L clear water

7Apr - 13Apr

Saw some pistols.. was a feminized seed but still good too see that. Week 2 of 12/12 but I think it has been in preflower the last couple weeks.. maybe officially starting to flower now. Didn't notice much flowering stretch.. maybe this upcoming week? Anyone know how long preflower lasts? ❤️

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Entering in probably the last week of vegetation, the girl has grown well but with same yellow tips in the new growth. This week I gave 0.5 ml of bio grow per 3L of water and I've increased the fresh air supply on the bottom since the plant is getting the bloom phase. See you next week. Happy growing

Ready to harvest after 4month and 20days😉. Happy growing! #420

The plants stopped growing in height and are now in FULL FLOWERING mode. Every day more and more flower clusters appear and start to build colas at the sidebranches now. The trichome production is also in full swing, the plants get stickier every day and smell DELICIOUS. The Barbarian (=AK-47 x Barbara Bud) plants have a sweet sandelwood-smell like the AK-47 but also with peach undertones from the Barbara Bud in it. I LOVE THE AROMA!

- Week 3 of flower Unfortunately, one of the collie man kush got hermies. So I sadly had to remove that one from the grow tent. The 4 remaining plants do have more space now. I still have some deficiencies I calibrated my ph and ec meter, and they where of by - 0.3 ec and + 0.1 ph. I gave them advanced nutrients revive from the top, also to check the run off. The run of was 1.4 ec and 6.5 ph, so i adjusted it now in the water tank to 1.6 ec. Hope they will respond good to it and the grow can continue.

Muy buenas amig@s!! Me encanta el olor que desprende esta cepa! Esta en su fase de engorde y se nota por dias. Lleva 16 dias a 12/12 horas ya que las tengo con feminizades y les cambie el fotoperiodo

OKAY!!! I followed everything I had learned from others I know, and studying non stop for months to do this right. I saved up money to get my equipment and I decided to give it a try. I found this site looking at pictures of amazing buds from so many different people and watching so many grow videos and always dreaming of having a good grow like I've seen people can do.(just never in person) I had no idea how this was gonna turn out. But..... It's looking killer!!! Honestly best looking smoke I've ever seen!(in person) And I cant wait to see if it can live up to its aromas and mouthwatering looks!

The ice dream cake plant takes the cake. Pun intended. This plant has such a crazy smell to it and I love it. I cant stop cracking the jar to get a wiff lol love growing different strains and comparing them. This plant grew much differently than the jealousy plan. Definitely stretched more during the stretching phase but didn't bulk up as much as the jealousy plant. The buds are coated in trichomes and the resin is oozing out of them. I will post a Pic of after I press both plants with the nug smasher. Should get some high quality resin. Overall great grow and looking forward to the next one. Thanks for following!

She's almost ready for harvest. Right now, she will be on plain water for six days. Next, I'll give her one final big flush, let the coco dry out, and then it’s chop time. This strain is looking very dense and is covered in a nice amount of trichomes. Most of them are cloudy now, with a few amber ones starting to appear.

Topped again today. These plants are exactly where I want them to be at this stage and look in perfect health. These two surviving clones are now at the front and right in the timelapse video. Had to go out of town for a week which is why there was a little standing water in the video. Don't usually do this but was rushing before heading out for a few days. Will be interesting to see how these clones take to the additional nutrients in this harvest. The mother was only fed Vitalink A & B for the entire cycle without any additional feed and is a beautiful smoke. Looking forward to seeing what feeding with the entire Vitalink range can do with these great RQS genetics according to their recommended feeding schedule. Happy growing!

Easy strain to grow. Good yields, easy to trim

Se comienzan a ver los tonos morados/rojizos de esta cepa tan hermosa de Sweet Seeds, vamos en la segunda semana de floración y todo bien hasta el momento, van más lentas de lo normal en la floración pero debe ser debido a las bajas temperaturas, aún así sus colores ya se notan en estas 3 nenas. Seguimos ...

Me hubiera gustado menos dias en 1L pero tenia ocupado este armario con otras plantas este el seguimiento https://growdiaries.com/diaries/188469-ogkush-grow-journal-by-gr3g4l?in_active_week_choose=1 esta semana se pasaron al armario de 74 x 74 x 170 ctms. con el Lumatek Pro 300W A mitad de semana después de 2 dias en un vaso y 22 en maceta de 1L. bajo 150W Fluorescente las transplanté a maceta téxtil e 7L. áprox. bajo el Lumatek Pro a 220W. Una vez transplantadas les hice un riego, 1100ml/planta con MicroVita 5gr. / 10L. para potenciar la vida de bacterias y microorganismos saludables para la planta. A final de semana me dió por hacerles una poda de hojas abanico. Algunas plantas miden más de 22 ctms y con la poda espero frenarlas en altura y que ganen en anchura.