My first grow. It's been a long time coming. This grow is 4 plants, 4 strains in a 90x90x200 with a 440w LED. Bruce Banner #3 Gorilla Zskittles Amnesia Haze Blue Gelato 41 The Banner and Skittles broke the soil successfully this week but unfortunately the Amnesia and Gelato didn't cut the mustard. Successfully germinated on second attempt however this means they are a little behind the the other 2 for now. I have the light dimmed to around 20% as the ladies were showing signs of having too much light, a slight yellowing to the ends of the leaves on the Skittles? This was with the light at around 50%. Will ramp this up slowly over the next couple of week once the other 2 break soil. UPDATE The Blue Gelato and the Amnesia Haze broke the soil a couple of days ago so they shouldn't be massively behind the other 2. Looking forward to seeing these ladies grow!

Well here we are at the beginning of week 8. Super windy today but I got my new rain tarp up. June 25th gave all the plants pretty good snip except for Cinderella number 2 which is still slow but coming along tomorrow I may top all the other little branches not quite sure yet. just fucked up my pH metre by hitting the calibration button by accident and now I have no solution to recalibrate it so I'm going to have to wait and kind of wing it until the new one gets here in a couple of weeks but my pH in my house water is around 7- 7.5 12 ml of vinegar in 12 qts should be the ticket. Friday June 26th well I found a way to use clothes pins to use them as wait to hold the branches down I kind of like it tell me what you think. well looks like everything is coming along okay I keep the newts down I rather have them a little too lower than too high. well this is the last day of week 8 in July 1st and everything seemed to be going along fine but it looks like my Cinderella 99 run into a bit of a deficiency on the nitrogen and somebody let me know if this is right or not and if there's somebody in Toronto who can test the tap water for pH levels and let me know my pH metre is broken right now

This was the runt of the bunch from the beginning and started flowering a week before the others. Seemed like in veg it didn't have enough nitrogen (yellow/green leaves) and in flower it had too much causing the bottom new leaves to grow kinda mutated and dark green. Even with those issues she still packed on solid dense buds covered in trichomes. pulled off 253 grams wet after trimming and 57 grams of trim will update with dry weight when ready

hey all😎 im in a middle of vacation and finally had a moment at least to check on the ladies. they are .. awesomee 😎 big too high , reaching between 2 to 3 meters, just started to flower , got to make big big maintenance soon. 🤞

A few dayss

Gorilla Zkittle grow well, everything is good, no have any problem. Gorilla Zkittle amazing beautiful plant, have a very frosty buds. Gorilla Zkittle smell is strong, amazing smell of fruits, strawberries, cherry blossoms and sweet chocolate Thanks to everyone who follows my grow reports, and Barney's Farm for nice genetics.

This week I defoliated the plants a bit. The plants have burnt leaf spots so I am going to give them a few watering sessions without feeding them with a PH of 6 next week I plan to switch them to 12-12.

Commencing Week 8: day 50 on January 19th Update is late my sincerest apologies. I will make it up by giving a very thorough smoke report when all is done. Otherwise all is going very well 😁😁👏👏 On day 50 I took the head off of bloody skunk. I checked trichome colors under USB microscope. At least 90% fully milky-white with maybe 5 or 6% Amber and the remainder clear. 😁 On day 55 I gave all of the plants a fan leaf trim including the remaining bottom half of bloody skunk. as I sit here and think about it I believe this will help with ensuring the entire plant ripens and matures at the same time - versus the tops being ready before the bottoms. I still plan on letting the bottoms of all these plants go way beyond the recommended time to see if I can initiate the process of rodelization. Either way I am glad to report that Bloody skunks pollenization looks like it is resulting in some seeds. (See photo). In hindsight my only concern is that because the plant finished a bit earlier than I expected the seeds may not make it to full maturity but I believe it should be okay we'll just have to wait and find out. That being said besides the bloody skunk being done just a few days early everything else seems to be right on time as described in plant profiles on company websites.👍 That's all for now thank you for your patience and attention and support and as usual feel free to leave any suggestions comments or questions and I'll do my best to get back sooner rather than later 😁

Indoors flowering nicely, brown hairs starting to show. Outdoors still one of the Ultimate still hasn't started to flower. I'm starting to wonder if it's not an auto at all. The gelato is forming nicely, with a little visitor a bee. The other ultimate is also flowering nicely. Day 75, due to hothouse damage the three outdoor plants are now indoors

Second week of flower. The girls are looking great. Day 10 - Realizing that I may have waited too long to flip to flower. Plants are over-hanging my table.

The Zenviations have been processed specifically differently I must say that they are both beautiful but one suffered the attack a little more even if he has very dignished flowers. The low one has a few beasts as you but you seem to end up great, hopefully good

Starting now the 48h of darkness, and then i will dry the plant. She is looking very nicelly and with a not too strong but pleasant smell.

Last week of veg, then 12/12

Welcome to week 2 of my Bubblegum XL diary, genetics by Royal Queen seeds. Looks beautifull, no starting problems. Grows fast since day 1. Small full spectrum burple cob light is doing its job very good, and as you can see the plant is growing as we like it to. GHE changed its name to Terra Aquatica, so its terra aquatica nutrients -- update day 3 wk2 Repotted into 15l rqs smartpot -- update day 4 wk2 Topped/fimmed plant, lets see how it comes out in the future Added small after-transplant video

05/20/2021 Wreak is putting on a glitter show the video does it no justice, sparkling is all I can say. She battled through PM break out and is doing well. Her smell is strong, i will be more descriptive later.....

An Indica-dominant hybrid that’s incredibly easy to grow and very resilient, suited for new and experienced growers who, with not much effort, will be rewarded with impressive 24% THC packed colorful buds with red and pink highlights, accompanied with light orange and white pistils that stand out from afar. Provides a powerful yet not overwhelming high that comes hand in hand with a unique extremely delicious sweet and doughy citrus pine-sol smell. Lemon Pie Auto performs exceptionally well indoors and outdoors, where it’s recommended to grow in bigger pots to let her show her full potential; being able to yield up to 550 gr/m2 in around 8 weeks. The extremely dense and chunky buds will leave you amazed by the excessive resin production that makes it look like they are completely buried in it, perfect for people looking for potency and great taste while having a balanced cerebral and body effect that will please even the more experienced growers. Also recommended for extractors looking for terpenes that will captivate your taste buds. Tech Specs Taste Lemon, Dough, Sweet, Pine THC Up to 24% CBD < 1% Size XL Height 80 – 100 cm Flowering 8 – 9 weeks Genes Sativa 50%/Indica 50% --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

About ready to cut tomorrow or next day

Week 1 germination through week 1 seedling , veg Topped Training Ph water 6.0 first couple days week 1 started using Cronk Nutrient auto flower guide .