This week I started feeding them, just some organic BAC Grow and Calmag 2.0 and added some molasses for feeding the micro-life. I put the SP-3000 a little stronger until leaves started to pray a little. Keeping the humidity and temps in the ideal zone. I see the plants really enjoy this and I was growing a bit on the dry side with my other grows. I'm looking at my options for fimming or topping auto's, my experience is, don't mess with them too much. This is also why I chose to not over-pot them. They started in a cup of seedling soil surrounded by super soil. They have been growing though and are going faster by the day now. Coming days I will make the decision to top / fim or just LST only... Thank you for checking me out again. Hug Bud

1st of November, HARVEST, D91 So, after the 24 hours of darkness, she is now beautiful and ready. After chopping her, I hung her for some hours – I had some stuff to do – and after that I did wet trimming since I find it more convenient and I don´t like to trim dry buds. I guess the best way for me would be to leave it drying for some days, do the trimming, then leave it drying some more, but, I sincerely don´t have patience lol. When I was in the last stock to trim (which was the main btw) the top bud looked strange to me so I opened it and it was starting to rot.. I got really sad but what can I do except for trying to save it, right? So I took all the rotten parts out of the top bud and tore it to pieces to watch it closely and keep it from getting any more mold. D94 Today I weighed the half part of the top bud that was already dry and it remained without any mold: 3.6 grams. D97 Everything is dry and now curing, the total weight is 68.6, 65 of the whole plant and 3.6 of what I saved from the rotten bud. I´m really happy with the results, the buds aren´t much dense but they look beautiful. D111 Today is the 14th day of curing. D120 Today I´ll be doing the smoke report, it´s been curing for 3 weeks and the smells is quite good already, I know it can be better but the taste is good already so I´ll be doing it today. More info on growing in the previous weeks and a summary of growing and also the smoke report are on the top at the strain review. Thank you very much for reading my diary!

It's been 42 days of flower now and The gals are still loving the fc4800 and their new 8x8 mars hydro grow tent as much as I do👍 leaves are sticking straight up towards the light. Love how easy the zippers are to open and close. Nice and strong and guaranteed to last. It has extra material on the backside of the zipper that helps for light leaksand enough ports and vents for anything you need in it👍. the tsw2000 is still going strong and is also a very good light. Its been going almost nonstop for 6 months and still working the same as when I got it👍. not much heat off both lights but the fc4800 is alot cooler and the heat-sinks work extremely well. I have it daisy chained to the tsw2000 and 1 dimmer controls the other and i don't need to be reaching in too far to dim the other light, it's awesome and I can't wait to buy more lights to daisy 4 together👍. I would recommend this light to everyone that grows with leds and have trouble with temperatures getting too high. Even if you grow with HPS lights I think any mars hydro light is a MUST TRY. I like how heavy both lights are because I know it means they are built soild and strong 💪. Very good sign with the frost they are starting to get thanks to bith mars hydro lights. I can notice more frost under the fc4800 and I'm thinking it's from the UV DIODES they put on the fc4800 👍. 2 days ago they all smelt like my nuken, sweet marshmallows. But now I can smell the monkey dough and gorilla glue and skunk monkey coming through👍. I touched a bud on the gorilla and monkey fingers smelt like fruit loops👍 really pleasant smell. Lingered on my fingers for atleast 30 min. I'm glad mars hydro is under priced compared to some brands and for how popular they are. usually companies would charge more. Thanks mars you guys are awesome 🤘🥁🎸. I'm getting a new exhaust fan soon. An 8 inch that will work alot better than my 4 inch lol. Wayyy to small for a 8x8 Grow Tent. Dehumidifier is going almost non stop to try and get the humidity down. I love how both lights on 100% power only raise my temperature 2 or 3 degrees 👍. You can rest your hand on the lights and not much heat comes off them. Obviously there is some heat but for the brightness of the lights and only raising the temp that much is awesome 👌.  And if I wanted to I could remove the driver from the fc4800 and run it on the outside of my tent because the cord is so long but 2 or 3 degrees is barely nothing👍. The girls are starting to bulk up abit now and only 3 weeks of flowering, these lights are awesome 👌.  My last run of monkey dough and gorilla glue didn't start showing alot of crystals until week 4. These were only 2.5 weeks and I started noticing some frost. Next week I will be able to tell more about what these custom bred seeds will be like. I love how the smell is changing now. Didn't want all them to smell like nuken marshmallows lol. It's awesome that I can get right inside the tent to do any work i need👍. Even if I wanted an 4x8 tent. I'd rather this 8x8 because it's so easy to work with the plants and have so much room to move around and massive headroom when I'm in there chillin with the gals🤣🤘. FOR EVERYTHING MARS HYDRO VISIT: Www.mars-hydro.com PROMO CODE: rocknroll Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍   https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids We switched from advanced nutrients to GREEN BUZZ LIQUIDS 👍

This week I did a single topping at the 5th node. Along with this I applied low stress training and tucking to expose the new growth.

Our Biscotti, heir to the legendary purple-red champion, this time in the normal version, is starting to get really serious. The flowers are super compact as I like, they are starting to take on color and are full of trichomes which I exceptionally photographed even in the ripening phase because they are gorgeous. The plant has been doing well since it was small, it also needed very little fertilizer and we really like this version too, for a moment in the vegetative phase it made us hope it was that one but it's fine just the same. I advise you to take a look at the photos of the trichomes….coming soon with a video too You can find it on Zamnesia https://www.zamnesia.io/it/9484-zamnesia-seeds-biscotti.html If you want some more info this is the description of Breeder Zamnesia Seeds ZAMNESIA SEEDS - BISCUITS: DELICIOUS BISCUITS TO EAT AND SMOKE Spice up your grows and add the Biscotti strain to your cannabis seed collection. It offers the best qualities of marijuana: potency, productivity and intense flavors. Biscotti is made up of South Florida OG and Gelato genetics and contains 22–25% THC, enough to make your body vibrate from head to toe. The genetic profile of this strain is 80% indica and 20% sativa, with effects that will make you feel relaxed and creative at the same time. Plants of the Biscotti variety produce dark green leaves and numerous pistils, while the buds tend to be small and compact. Towards the end of the flowering phase, when nighttime temperatures drop a few degrees, you may also notice purple hues. GROWING BISCOTT: FAST FLOWERING Biscotti won't test your patience. You can break out your scissors and start harvesting her after about 8–9 weeks of flowering indoors. The plants are robust and vigorous and grow well both outdoors and indoors. Under the sun, you can expect heights of 130–170cm and yields of 800g/plant ready in October. Some experienced growers have reported achieving higher yields. So, the results will depend on your skills. Indoors, Biscotti typically reaches a respectable height of 130–150cm and offers yields of 550–650g/m². FLAVORS, FLAVORS AND EFFECTS OF BISCUITS: DELICIOUS AND COMPLEX Once the drying and curing is finished, you will finally be able to taste the fruits of your labor. Biscotti is definitely one of our tastiest varieties, producing aromas of vanilla and honey biscuits contrasting with the classic diesel notes. A great addition to the kitchen where you can prepare delicious baked desserts. Being very potent and producing effects that can overwhelm the user, we advise you to consume it with caution to avoid becoming overwhelmed. This strain offers a relaxing high for the body, while the creative juices will start flowing in the mind. You absolutely must try the new F1 suits from Zamnesia https://www.zamnesia.io/it/35-semi-cannabis/634-semi-f1 Music of the week www.radionula.com 432hz frequencies 12h for my plants too. Feeding Only Water

Finally back to it!

I might have made a few mistakes, since I watered with Big Buds for another week even though we should have already started with Overdrive. Anyway, it still turned out to be another great autoflower. I just love the genetics of Fastbuds.

Forgot to document further, this is all i had before harvest, harvested around week 11 of flower

Day 36 - 42 So fun to see her little flowers!! Everyday they are becoming bigger and noticeable. I am keeping the nutrients same as past week. I hope she is happy!

Will post pics very soon Transplanted into pots today , and will add my PH and PPM information closer to the first pump! Pics are up ! Day one of Veg Starts now! :) Light timer worked a perfect 18/6 Had Pump timer set on 30 mins on the first * Corrected to 15min, 3x per light cycle, leaving 7am to 1pm open. NOV 4 , Had issues with humidity , Added humidifier and turned off my Filter/Inline fan, Temp sitting around 80degree , and 50% humidity , with Tent vents open and Door partially unzipped.

On day 1 I changed out my reservoir. I lowered my nutes to 650 ppm(25% reduction). I adjusted the PH down to 6.1. My left plant has some burnt tips from either PH shift or over fertilization. My hope is that the lower ppm will help to resolve the issue before it spreads. On day 2 I adjusted the reservoirs PH from 6.3 to 5.9. On day 3 the reservoirs PH is 6.0. I installed my new 200 watt HLG Rspec. I adjusted PPFD readings to 700-1300 PPFD on all tops. On day 4 I adjusted the reservoirs PH from 5.8 to 6.2. On day 5 I adjusted the reservoirs PH from 6.4 to 6.0. I diluted my nutrients in my reservoir by removing one gallon of nutrients from the rez and and adding 2 gallons of straight tap water to the rez. This brought the nute concentration from 770 ppm to 540 ppm as the plants will be entering the ripening stage in a few days and they have too much nitrogen judging by the extremely dark green leaves and burnt leaf tips on some branches of the left side plant. The buds seem slightly smaller then my last run which may be due to an excess of nitrogen and maybe not enough light as some of my tops are taller then the others making proper PPFD challenging. All in all the girls are coming along nice and I look forward to the final weeks of flowering 😀 On day 6 I adjusted the reservoirs PH from 5.9 to 6.2. I think I have halted the nute burn as I haven't seen it progressing any more on the leaves. I will continue to monitor closely during these final weeks. The trichome production is increasing with some trichs on top of colas starting to go cloudy. The pistils are turning brown with roughly 40-50% are turning brown all signs I'm getting closer to the harvest window 😆. I dimmed my light to give 600-1000 PPFD to tops. On day 7 I reduced my temps to 75 during the day and 68 at night. I adjusted the PH of the reservoir from 6.6 to 6.1. My reservoirs ppm was too high so I diluted the rez with 2 gal of tap water. This brought it down to 480ppm. The average ppfd to all 14 tops is 604 with no top receiving more than 1000 ppfd

.

Her we go after 30 days, 3 days germination included. 27 days of grow! End of week 4. Hello week 5 and hopefully flowering ❤️ They seem good to me. Can’t wait 😜

Day 1 of flower

…

Three weeks in and he’s looking great!

Hello colleagues! As I expected, in the middle of the week all the plants bloomed, especially pleased that almost in unison, including our medical strain. I did nothing except remove the extra large burdocks, I will do a thorough defoliation after the large "dandelions" appear. In the meantime, I continue to observe. The lamp power is still 75% Thank you for stopping by, and be healthy! 🙏 To be continued... 😶

This week went well, I topped her and am hoping to get the final toppings done this week. She is going super vigorously and I have high hopes for this one. So far seems like a perfect auto strain for mainlining. Thanks for stopping by, be safe and blaze on!

My apologies on never giving a smoke report. I ran into a situation where I had 2 weeks to move across country. I don't like to include untrue data to my expectation/ perceptions.