Recommended
Likes
Comments
Share
Now all plants are fully blooming and producing buds. The two plants on the back are really difficult for me to reach, so they'll have more leaves as I can't trim em. Especially the rigt back corner one, it's way bushier.
Likes
17
Share
I’ll start by saying I’m NOT using both bud blood and bud ignitor in one solution, I am using bud blood on the rear wedding gelato plant and bud ignitor on the front one to test the outcome of them individually to see the best results! I tied down and defoliated twice in the week and have switched to 12-12 yesterday so they’re transitioning now and should be in bloom by week 7! I made some extract them made some gummies successfully I might add and added the photos in the diary!
Likes
32
Share
@Sejnik
Follow
Dívky opět dostaly čaj od biotabs. Vařil jsem ho 34 hodin a každé rostlině jsem nalil 500ml tohoto lektvaru. Vůně dívek se dál příjemně rozvíjí a květy pomalu nabírají na objemu 🙂 jsem zvědavý jak toto dopadne.
Likes
71
Share
Hey bros, She is almost ready for the flip, I think maybe one more week or so, because I want her to get big fat buds so I have to let her build a structure for it. At least for now, all the colas seems to be growing perfectly at the same height, as if she is distributing her energy equally, it's is indeed something unique and I think it will have a good impact on her overall size and yield. It takes a lot of work to get her like that. Her branches are around 25cm each, I think I will let then grow from 35-40 so she can carry a big load of dense buds. What do you think? For these last weeks of vegetation, I'm turning on the Flowering LED part of the QB, which now gives me 120w at 3000k/4000k. Did some LST and got her tied up as she was big enough now and can grow freely. We are now at 8 main colas with 4 internal second ones that I think will get at the main class before flowering, let's hope so. It will be a beautiful shape. So. not counting the super extra work that mainlining is, I think I'm liking it. Not sure If I will run it again, but it's fun and the plant seems to love it also. Oh and I almost forgot.. I had to put down the dosage of AN back to 1/4 of the recommended because I think some leafs were starting to get yellow tips.. very very very small, almost not visible.. but.. as a warning.. I went down. Hope I did right and did not lose some vigorous growth at this last stage of vegetation. But still they love this stuff. Im anxious to see how the flowering line does... going at 1/4 and up every week. I also stop to PH the feeding, I was giving her food at 5.8 but I've read a lot and understood how the ph perfect works and I bet they will be safe with 6.3, as it is after I add the nutrients to my 6.8 ph well-water. Im still controlling ppm though, I don't think I can add the full dosage as we have lots of extreme factors here like high temperatures, high humidity, not the perfect vpd, and etc... so I started at 1/4 and got up to 1/2 and now back to 1/4. She is vigorous. Até a próxima semana! Tchau, do Brazil! =]
Likes
14
Share
@Dunk_Junk
Follow
I have no idea why I didn't take photos this week.... 😶 Possible stoner moment... not gonna lie.. 😂 She's getting closer to the end though.
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep bumping and more and more purple 💜 smell very strong 🤪 Will start flush next 💧 Give water each 2/3 day 2 l Water + Bloom + Green Sensation + Sugar Royal (3.5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 26 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
12
Share
@Elk419
Follow
Did a re-bath of Ph'd RO water for 25 minutes. Seemed to stabilize pH.
Likes
10
Share
Abrimos aun mas la penetracion de luz, abriendo las ramas y cortando unas hojas que cubrían nuevos brotes de flores. Vamos como viento en popa ⚡
Likes
21
Share
It's been a fairly uneventful week in the 5x5. I cut down my Blackberry auto the other day and I've been thinking of getting seeds ready for the stuff I plan to grow outside this summer...With my currents cycle of plants being deep in to flower, I have time to look forward at upcoming projects. The Mimosa cake auto is one of those plants currently deep into flower. She's been giving off a dank smell of earthy/fruity/spicy terps. She is extremely dense and sticky to the touch. I find myself cutting fan leaves off daily due to her busy and stout stature. The only down side I have to her is the fact that she's going to take around 100 days from germination to harvest. Process/ Environment changes: - Turned off one TS1000 after I cut down the Blackberry auto. I did this to try and cool the tent down. Higher temps outside creates an increase I'm ambient air temp in my basement. - Fed Advanced Nutrients Bloom nutes at a rate of 1.5 mL/gal - no longer using a fish tank water heater to heat my water reservoir due to increased ambient air temperatures in basement Trichomes still mostly clear... I'm on day 84 post germination today as I write this.
Likes
7
Share
@GhostByte
Follow
Did some defoliation and lst this week. Spread out the branches a little better because they were too close together. I lollipopped them a couple days ago. Theyre growing very wide, bushy and fast. Budlets will form any day now. Giving her one last shot of sugar royal. Only one of them isnt getting it because she looked quite packed with nitrogen. Dont want the same like my last grow to happen this time. :)
Likes
8
Share
@Youngun
Follow
we are at the business end now flowers all over the scrog, reacting really well to the defoliation and tying down, really should have taken cuts from the 1 on the right. Hopefully I’ll get a Keeper when I pop the next set of beans
Processing
Likes
23
Share
@Calveeno
Follow
Greetings fellow Green Thumbs! As promised, check out those roots :) I had to zip tie my light to the ceiling of the tent haha I can't seem to find the 1-foot extension set. Hopefully I won't need it. Still got about 5 inches of space left. Trimmed some more lower growth to open up the middle. Pre-flower pistil action. Looks good. Plant looks pretty healthy. Res temps hovering around 72F with constant white root growth. Decided to ramp up nutes to full strength (GH Flora 3-Part "Simple Drain-to-Waste" Schedule | Week 6 - Early Bloom minus FloraLicious Plus and RapidStart) <== in case I haven't mentioned already 👌 I think for my next run, I will run an airline through the net pot prior to filling with HEC and have it centered directly underneath the plant (Korinthius has been doing this since day one!😉) Thanks for tuning in. 'Til next time folks. Stay blessed! Peace! 🙏
Likes
9
Share
They are getting bigger and now they’re blooming 🥦💚
Likes
57
Share
Week 8 of flower is in the books and this show is quickly coming to an end. I said last week we had about 7-10 days and I was spot on at the 10 day mark. I was only wrong about the order. The cheese is ready to chop before the rest and the gorilla cookies, cherry Bomb and lemon haze will follow in due course. The cheese is a beast and it’ll take a little time to get it all run through the bowl trimmer. At least the big one goes first. Her tallest colas have foxtailed like mar, despite the late supercrop. You can tell where the sweet spot for the light is at about 10” distance from the canopy. Any closer than that and the tails begin to show prominently. It’s a good example of just how close you can get to these fixtures with a little bit of prior experience. It’s been noted for the next run😎👍😎. The res. is on an h2o2 only flush for the remainder until the rest are ready to come down. Not a moment too soon either - the pollen chucking project has stalled out waiting for these girls to finish and now that we’ll have a little extra room, we can start running our cuts in the aerocloner🤟. Not long at all now folks. Thanks for tagging along through all this. Learned a bunch about this system and we’re back to hardware mode to make some serious improvements for the next run🤙😎. I love hardware mode😉. Background/Repetitive Nonsense The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Likes
16
Share
They all basically look the same at this point. Plant 4 popped a day later so it’s a little smaller. At day 12 I sprinkled some great white shark around each plant. And added just 1 tsp of green harvest bone meal.
Likes
11
Share
The blueberry smells lovely but what I want is ripe seeds to start a true feminized plant lol…I love the blue berry cross I can’t wait for some ripe seeds