Very good. Decresing the humidity to 45 %

5th September It will be a few exciting days. Thunderstorm is coming. She was trimmed for airflow and has good support. Lets hope for the best!

A really explosive week of growth. I pushed PPFD up to 310umols. Dimmers are at 60% which is drawing 224w plus 18w of DRRB. I have alos started Emerson effect ... Another The Emerson effect is triggered by the simultaneous exposure of plants to light in the deep red and far-red spectra Deep Red 660 nm /Far-Red 700 nm . A bit of boring science that explains why you need both far red and deep red in order to trigger Emerson. The effect occurs because photosynthesis is driven by two distinct pigment systems working in series:Photosystem II (PSII): Absorbs energy most efficiently at shorter wavelengths (higher frequencies), like 680 nm (441 THz). Photosystem I (PSI): Absorbs energy most efficiently at longer wavelengths (lower frequencies), specifically 700 nm (428 THz). When you provide only the higher frequency (deep red), PSI becomes a bottleneck. When you provide only the lower frequency (far-red), PSII is not sufficiently excited to provide electrons. Providing both frequencies simultaneously allows both systems to work at peak efficiency, resulting in a rate of photosynthesis that is greater than the sum of the two lights used individually. To understand the Emerson Effect, think of photosynthesis not as a single engine, but as a two-stage assembly line. What is the Emerson Effect? Discovered by Robert Emerson in 1957, this phenomenon shows that plants perform photosynthesis much more efficiently when they are hit by two specific types of light at the same time: Deep Red (660 nm) and Far-Red (700+ nm). If you give a plant only Far-Red light, photosynthesis is very slow. If you give it only Deep Red, it's better but still limited. However, when you give it both at once, the total rate of photosynthesis is significantly higher than if you just added the two results together (1+1=3). What is Happening? (The "Assembly Line") Inside the plant's chloroplasts, there are two "workstations" called Photosystem II (PSII) and Photosystem I (PSI). They work in series, meaning the first one must pass "parts" to the second one. PSII (The First Station): This station is tuned to catch Deep Red light (660 nm). It harvests electrons from water. PSI (The Second Station): This station is tuned to catch Far-Red light (700 nm). It takes the electrons from the first station and uses them to create energy (ATP and NADPH). The Problem: If you only provide Deep Red light, the first station works fast, but the second station can't keep up because it isn't being "powered" efficiently by that specific frequency. This creates a traffic jam of electrons. The Solution: By adding Far-Red light, you power up the second station. It now "pulls" the electrons from the first station much faster, clearing the traffic jam and making the whole assembly line run at full speed. The Benefits for The Grow.. Because i am using the Biotabs water-only method, my plants already have a steady supply of organic nutrients. Implementing the Emerson Effect offers several distinct advantages: Increased Biomass: Because the "engine" is running faster, the plant produces more sugars and carbohydrates, leading to heavier fruits or flowers. Faster Finishing: Plants often reach maturity sooner because they have more surplus energy to complete their life cycle. Better Light Penetration: Far-Red light is very good at passing through the upper leaves. This "wakes up" the lower parts of the plant that would otherwise be shaded, allowing the whole plant to contribute to growth. Enhanced Secondary Metabolites: In many crops, this synergistic light can stimulate the production of terpenes and antioxidants, improving the "quality" (smell, taste, and potency) of the final harvest. The "Sunrise/Sunset" Trick I am using 4x Invisible sun Far red/Deep red bars,they use high-quality Samsung LH351H (660nm Deep Red) and specific Far-Red (730nm) diodes for 10–15 minutes at the start or end of the light cycle. This mimics the natural shift in light at sunrise and sunset, "waking up" the photosystems or signaling the plant to go into "sleep mode" faster, which can further optimize the flowering cycle. Enviromentally i am chasing a VPD of about 1,1kpa. My room seem to sit nicely at lights on at 24c with no real drama and a little help from a 220W greenhouse bar radiator. Its using abot 4kw/h a day atm because my room is attached to the side of my house and its been -5c.. I have had to add some humidity as its also very dry atm. Im aiming for RH of 65% with my 24c but it is more around the 62s.. VPD is crucial and is the focus for this grow for me. The autopots and Biotabs make it so easy ican really just focus on perfect enviroment. A VPD of 1.0–1.2 kPa provides enough "atmospheric pull" to move calcium and magnesium up from the roots, which is critical for the rapid cell division happening now.. Plants will be flipped on Saturday which is their week 5 as im a bit behind.. As this happens i will push PPFD upto 4-500umols. by week 2 of flower. Thats the plan anyway..

Servus Moin! Die Bluzcotti wurde heute getoppt da ich 4 schöne Triebe gesehen habe, und mich jetzt auf diese konzentrieren werde.

They grow a lot this week, we applied a nutrient called Delta 9 and it was amazing the way in wich they received it. We are thinking they are having a nitrogen deficiency because of the color of the leafes

got bitten by a spider and realized i was always wondering what my spiritual animal was, and realized it was spiders after that awakening of asking mother natures help me and spiders made a blood pack and since then nature has been helping me out by protecting my plants, from thieves and bad rotten people. and nature gave me spiders to protect my children. one of my spiders thats protecting the rooibaard is called GREGGK.

Second week with the mini humidifier here and so far mixed results. I need something with larger capacity so I don't have to refill it every single day, but still small enough to fit the IKEA box. Strongly considering to add a heated mat too at some point. There seems to be quite a bit of temperature difference between the plant and the bottom of the pot. Maybe just some insulations. Sooo many things to try, but let's focus on not overfeeding them 😃

Sponsored by: ⚖️HUMBOLDT SEESDS⚖️-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 29/9 it was a tough month for me but I'm back in charge. We are almost at the end of the cycle and the flowers begin to be large and the pistils begin to color. __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Highly professional graphics and website, one-of-a-kind genetics, and a legendary story! Anonymous shipping! ✅https: //bit.ly/HumboldtSeedsCompany __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Went from 450w to 150w blue for a week due to heat and too much height gain. Weather got cold so I put the 450w red back in as they seem to be thickening up. Feminising was very easy on the ones I chose, I chose only three that had thicker faster flowering and more THC but will cross with the more sativa dominant ones.

Heya👍🤙👍🌱 Getting very excited. The smell is amazing. Gonna Show this Grows trim jail Live on Facebook. Check out my Facebook profile: https://www.facebook.com/share/v/H6PnoahTHrEzm63U/?mibextid=oFDknk Big BIG BIG thank you to Sebastien, Heather from Fastbuds420. You guys are the best. Can't wait for the next live. Even Bigger shout out to Hydroponic.co.za. My local Hydro Shop and Sponsor. Thank you Sir. 👍🤙👍🌱

Good day, friends! My Nevilles Skunk is growing nice and easy. I am using Hesi nutrients for the grow and I see the plant loves it. Nice PPM level. Like always I water plant EVERY DAY when growing in COCO. The PH 6.3-6.5 always. 2 week more for VEG will be enough to slowly start the Flowering.

🌱 Sticky Broccoli – Grow Diary 🌱 Week 12 | Transition Week | Coco + Perlite This week is the final stage before flower 🌸 Plant is fully mature with a dense, even canopy under the SCROG 🌐 Plan is to take clones from healthy top growth ✂️🌱 Selecting strong branches to preserve genetics before the flip. One more defoliation will be done to clean up the canopy 🍃 Removing excess fan leaves to maximize light penetration and airflow 🌬️ Structure is dialed in—flat, wide, and ready for stretch 🚀 All bud sites are exposed and positioned evenly. Plant remains healthy with deep green foliage 💪 No signs of stress going into transition. Watering consistent with slight runoff 💧 Environment stable and optimized for flip. 📈 Next step: final defoliation, take clones, then flip to flower cycle 🌸🔥

Plants recovering well …heat is causing some problems in the indica room otherwise all is well …1 more week till flush then 1 more week after that til harvest

Overall this was a little bit of roller coaster with this strain none but two of the plants turned out the same I did accidentally herm one out but still was good I had one turn out more looking like the white widow and very frost but I would grow this again just to perfect it I know I could of gotten more out of this strain

First Time grower, growing in a DIY growbox made from cardboard and taped mylar on the walls, some PC fans and an arraged carbon filter, a cheap led light bought on Amazon. I'm curious to see what i can harvest. Planning to do some lst on week 3 and start feeding 8-6-6 npk on week 2

Been rough last 3 weeks 3 storms 3 power failures lasted 3 days each time. Figured, I do harvest before the 4th storm coming in tonite. 9 days lost..vegging 2 clones for out doors 8 weeks to train.... Patients, timing is critical hopeing to transplant mid to late may. (Unless I put up cold frame). 06/17/2018 smoked my last bud today. Cutting clones soon,to grow,and trade might get Jack The Ripper (TGA) cutting,and LSD photperiod cutting as well.

Jan 13th ordered a Dehumidifier today should be here Monday need to get the humidity down for flower I can only get it down to 57% so Hopefully it will work One of the amnesia haze plants have some type of deficiency not sure have brown spots on leaves Got humidity some decent control but I’m sure amnesia haze 1 is dealing with PH issues the PH meter is cheap and I’m sure it’s been off a bit so I’m going to look for new one this week