Noch immer leicht im wachstum. Obwohl schon seit 2,5 wochen in flow. Neigt sich aber schön langsam dem ende zu und steckt bald ihre ganze kraft in die blütenbildung. Für in der 3ten woche bin ich sehr zufrieden. Ich liebe es wenn sie die ersten 3-4 wochen noch nach spargeln. Für see of green ideal. Die besten und saubersten stecklinge gibts wie immer hier bei ROOTS-FARMS. The best in austria and maybe europe👌🔥💚

Hi Grower!! Day 85 Complete ( 55 Days Flower) Today I got the first one, which was under the Viparspectra P4000. I can only say madness, it was finished really quickly and it is beautiful. The 2nd I still leave it had small problems at times, but there are also small beautiful buds on top Grown under Viparspectra P4000 CHECK YOUR DISCOUNT WITH THIS LINK ‐----------------------COPY&PASTE--‐-‐---------------- https://viparspectra.eu/?ref=budspencer Or with my Coupon Code: Budspencer420 Pheno 2 grown under Marshydro TSL-2000 same discount code Update 19.08.21 56 Days flower for Nr2, i give her some more days under the TSL-2000 . She looks very beautiful, more Zkittlez pheno i think

01.04.22 Делаем раствор на 4 литра воды: MGB=13,24/2,64/15,28. ph=5.5, ppm=800. Удобрениями поливаю в последний раз. 02.04.22 Оборвал желтые листья. 03.04.22 Опрыскиваю талой водой из пульвика. 04.04.22 Опрыскиваю талой водой из пульвика. Оборвал желтые листья. Глянул в микроскоп на бошечки - зреют!) Трихомы нарастают с каждым днем, сейчас много прозрачных, но финал уже близко - недели 3 примерно осталось. Различается разный фенотип у растений: то, что слева - есть фиолетовые оттенки на листьях. Которое справа - более зеленое было, сейчас листья просто желтые. Хотя, может быть, еще влияет расположение к лампе и увлажнителю. Правое растение Клубники находится в непосредственной близости к увлажнителю, а над левым светит ярко днат400 в 35 см. 5.04.22 Полив талой водой, 3 литра, pH=6,5 ppm=10. 11я неделя завершена. Полив удобрениями окончен. Далее буду поливать раствором рипена. Шишки большие и вкусно пахнут =)

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Natural grow with all the cloudy,rain und Sun hours

Si it's been a pretty good week. Getting very impatient at the moment. Trying not to dwell on my plants too much, I just need to leave them to finish maturing. Iv pretty much started flush now for 2 weeks so that will take me to the end of week 8. Update - Monday So my thoughts have been drifting towards the next round. Iv been writing a list and so far Iv decided I want to explore organics further so will most likely be amending my soil with dry amendments such as different meals. I also would like to make better use of microbes so I will most likely be using at least recharge. Hopefully mammoth p also but I'll buy that one as I need it further down into the bloom phase. Something else I also really want to try next cycle is the use of other crops to help with IPM and also help feed the soil. Two I have decided to use already are basil, which is meant to be great for keeping bugs away and also garlic. I want to try and use crops that I will also want to eat that's why I decided on garlic. I'd also really like to try and grow a couple vegetable plants alongside my cannabis but I am a little unsure of which plants will also grow happily with the same light cycle as cannabis. IRS a bit of a strange light cycle for here in England so I'm unsure of what to grow but I'd love it if I could grow some squash, corguettes or aubergine. These are my staples for my diet so these would be incredibly handy. I am about to move so will have a dedicated small room or large walk in cupboard, depending on how u look at it. I would love to be able to make slightly better use of the space and if I can feed myself even a few times from them as well as them improve my cannabis via post resistance and resin production (they use companion crops in lavender production to raise essential oil production) then it seems silly not to do so. It will be I interesting to pick out cover crops for my 12/12 larger flowering space, but also for my 18/6 space to grow alongside the autos I plan to grow in there. Obviously different light cycles will let me do different plants. I think it will take more initial planning on my part, but I feel once I have it all dialled in after 4 or 5 runs it will be a lot cheaper and much more sense sustaining. If anyone reads this and knows of any decent potential companion crops I can use please message me. Like I say garlic and basil so far but have heard beans are a great way to get lots of nitrogen in the soil so they might be a good one for the 18/6 tent. Also I was thinking and I'm a little unsure of when I'm going to want to harvest so I've decided to leave a week between harvesting each plant. First one will be pulled this weekend at week 7 of flower then week 8 of flower for the next and the last will be week 9. That way I can sample over the coming weeks and decide which I prefer for the next cycle. Update - Tuesday got my jewelers loupe today but i think im going to buy a usb microscope instead, as its really difficult to hold it steady enough for long enough to be able to tell whats going on with the trichs. i tried to shoot a few pics through it on my phone with limited success. I think there are about half trichs cloudy atm, maybe slightly less but like i say its hard to tell. Update - Friday Ok well yesterday i caved and harvested and hung plant 1 of 3. Couldn't resist. Now that I have this one to fuxk about with I'm less inclined to want to bring the others down. Smells unbelievable pinot, fruity and skunky. Have just used a cardboard box with lines strung through the top to hang from. The plants were so small and had no side branches so I had to tie it to the stem from the lines. Not a lot on it I dont think but the main cola was pretty chunky. Interestingly the topped plant had more tops obviously and also has some mad side branching that's at the same level as the main colas and they are all about the same size as the one cola on the non topped plant. I half expected it to just be double the size of the topped but less of them. Note to self for future reference: Always top plants Use bigger pots

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

The result:63 DAYS FROM SEED TO HARVEST

10/28 - First week in the books. I figured now would be as good a time as any to use a sprouted seed tea because the plants seem to be starting to fully stretch. Pistils are coming slowly but surely. Canopy isn't full but it's still the best I've ever done and I'll take that knowledge into future grows. Exciting weeks ahead. Crazy to think in two weeks it will look more like the finished product than the plants you see before you. I'll take them out for a photo shoot this weekend. The amount times I will be taking them out of the tent will be limited from here-on-out. These plants are getting cumbersome.

Que pasa familia, vamos con la octava y floración semana de floración de estas Papaya Zoap F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros. Y también superaron el shock por el trasplante se recuperaron 100%. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. El fotoperiodo esta a 12/12 para floración. Las jodidas estiraron bastante, y es algo que no me gusta de todas las F1, que cultive hasta ahora. El olor que desprende es muy peculiar es muy dulce y empalagoso, a mi parecer, no pinta nada mal, las flores están muy prietas y la tricomada es bestial. Hasta aquí todo, Buenos humos 💨💨💨

Day 57 - Starting week 9 off with a gallon and a half of water and nutes today. She’s doing really well and getting big. Finally really starting to bud up a bit and not just pistils here and there. Not really doing any defoliating until she’s buds up a bit more but she’s getting there. She’s still stretching like crazy and when she seems to slow down, she gets watered and starts putting on the inches again. Day 58 - Didn’t really do anything with her today. Just took her out of the tent to give her a look to see how she’s doing. It looks like she’s definitely starting to bud up and should be an amazing harvest, when the time comes. Day 59 - Looking good and starting to stack up nicely. Still has got a long was to go but all is looking well. I did chop off a couple of lower branches that are completely covered and I’d rather her focus her energy on the ones that are getting the light. She’s gonna need some water again by Saturday. Day 61 - Gave the girl about a gallon and a half of water and nutes today and removed a couple fan leaves as well. She’s coming along nicely and buds seems to be forming nicely as well. Not really putting out much of a smell yet but hopefully she’ll starting frosting up soon so I get get a good smell from her. Day 62 - Not a whole lot new going on today. Removed a few dead fan leaves at the bottom and checked her out under a scope and looks like the trichs are starting to form. Day 63 - It’s the end of week 9 today and she’s drinking like crazy. Going to give her some more water and nutes tomorrow. She’s really budding up nicely and looking pretty damn good. The stretching has slowed down a little so hopefully she’ll start packing on some weight and getting frosty.

There is a timelapse of this week, Blueberry is in the background. This entry covers days 30 - 38. This week has seen violent acts. I've topped the blueberry. She's doing well! I've started to give this plant less light so I can give more energy to the flowering GSC auto. I'm not sure how much this will stunt my plant. Lately my feeding schedules for both this plant and my GSC auto are obtained by following the GH Flora Series recirculating feed chart on the General Hydroponics website. I put the amounts they suggest for 1 gallon, but I use 3 gallons of water. So, I give the plants 1/3 of what the feed chart recommends. It's worked well so far. My plants are thriving, and I haven't seen signs of nutrient burn. The only deficiencies I encounter are Cal Mag. I remedy this by mixing in some tap water with my RO water.

They're improving substantially. Minor Tent & Equipment Sterilizing All 900W running for late Flower Adjusted the Fan positions & speeds Raised the humidifier closer to canopy Average VPD = 1.5kPa @ 19C

DWC Grow #3 - Flower Week 1 (Week 6) | Stretch Begins + Trellis Work + Reservoir Stabilizing (Jan 1–8) Day 35 (Jan 1) - Flip day Came back after being away a couple of days for New Year and she had absolutely exploded. The tent was suddenly feeling small. Water level had dropped a lot, and the readings were pH 5.98 / 705 ppm. I decided to flip to 12/12 and set the schedule to lights on 00:00-12:00. The mix was still in a conservative zone, and I focused on keeping the system stable rather than overreacting to the speed of growth. Day 36 (Jan 2) The canopy was getting dense enough that I started removing a little leaf mass, including one hilariously large fan leaf (it looked like a solar panel). I’m trying to stay controlled with pruning - just making room and visibility. Around this time I also logged pH 5.63 / 632 ppm (00:25). Day 37 (Jan 3) After a top-off I landed at pH 6.02 / 582 ppm. Still seeing how sensitive ppm is to top-offs because reservoir volume isn’t huge at the moment. The plant kept pushing hard. Day 38 (Jan 4) Did another small prune/tidy-up. Logged pH 6.15 / 601 ppm (00:30). pH drift upward continues to be the recurring theme in this run, so I’m trying to correct without swinging too aggressively. Reservoir temp has been staying cool, which I’m happy about. Day 39 (Jan 5) After adding 1 liter top-off water, readings were pH 5.85 / 610 ppm (around 11:45). Waterline was about 7 cm below the net pot, which I’m comfortable with as long as roots are well established in the solution. Canopy management is now a daily reality. Trellis work / canopy shaping During the week I also did some leaf tucking and weaved two tops sideways under the trellis, just to keep the canopy more even and avoid everything stacking straight up into the light. The plant is clearly in “fill the tent” mode now, so a little daily steering makes a big difference. Mid-week res swap + lighting change I mixed a fresh reservoir batch (9 L), dialed it to around pH 5.78 / 833 ppm, then did the res change. I also bumped light intensity up significantly (went to 75%) to match how aggressive the plant has become. At this point the plant is vigorous enough that the limiting factor is becoming vertical space and keeping a clean, even canopy under the net. Day 43 (Jan 8) 00:30 readings: 753 ppm / pH 6.38, so I topped off about 1.5 L and rechecked after mixing: pH 5.86 / 709 ppm / EC 1.418 (res correction landed cleanly and EC/ppm lined up perfectly). Week takeaway First week of flower has been all about managing momentum: she’s stretching, drinking more, and thickening up fast. The plant looks vigorous and the system is behaving predictably when I keep changes controlled. The main “project” this week has been balancing pH drift + top-offs while keeping the canopy open enough to actually work in the tent.

Fast to flower some decently large nugs! This girl is the only one that survived my "initial torture test" for my sf4000(dimmed to 75% (333watts) in quarter of my 3x3 tent)! She was very resistant to "too much light intensity" as a seedling, and didn't mutate! Once the light was at an ideal height, she started vegging very strong, but 1 week of important time had been lost. She started to flower, and stacked up a bunch of dense buds very nicely! I'm very excited to be growing this strain again next run!-with more training.

Plant looking happy 👍🏾

Germination Report: Runtz vs. Runtz 🌿✨ Hey there, green thumbs and cannabis enthusiasts! 🌱🌟 I'm thrilled to share the exciting details of our Runtz vs. Runtz germination journey. Buckle up, because this ride is packed with fun, knowledge, and a touch of green magic! 🍃💫 The Germination Journey 🌱🚀 Our Runtz seeds were given the royal treatment from the get-go! We kicked things off with the Cannakan method, ensuring our precious seeds had the best start. Here's a step-by-step breakdown: Hydration Stage 💧: Seeds were soaked in water, embracing their first taste of life. This process lasted about 30 hours, allowing the seeds to absorb enough moisture to kickstart germination. Watching those little seeds swell up is always a magical moment! 🌟 Transition to Soil 🌿: After their water bath, the seeds were gently transferred to soil. This crucial step ensures they have the nutrients and environment they need to grow strong and healthy. Each seed was placed in a cozy, nutrient-rich bed, ready to sprout and thrive. Understanding Runtz Genetics 🌸🔥 Runtz is a legendary strain, celebrated for its powerful genetics and exceptional traits. Let's dive into what makes Runtz so special: Parentage 🌿: Runtz is the love child of two powerhouse strains: Gelato and Zkittlez. This dynamic duo contributes to Runtz's unique flavor profile and potent effects. Flavor and Aroma 🍭: Expect a delightful explosion of sweet, fruity flavors with a hint of candy-like goodness. The aroma is equally enchanting, filling your space with a tropical, sugary scent that's hard to resist. Effects 🌈: Runtz is known for its balanced high, offering both euphoria and relaxation. Perfect for those seeking a joyful, uplifting experience that melts into a soothing body calm. What to Expect 🌿✨ As our Runtz plants grow, here are a few things to watch for: Vigorous Growth 🚀: Thanks to its robust genetics, Runtz is a strong grower. Expect rapid development, especially in the early stages. Keep an eye on those green shoots as they stretch toward the light! Resin Production 💎: Runtz is a resin powerhouse, producing dense, trichome-covered buds. This not only enhances its potency but also contributes to its striking appearance. Balanced Structure 🌱: Look for a balanced structure with a mix of sturdy branches and lush foliage. This makes Runtz ideal for various growing techniques, whether you're a novice or a seasoned grower. The Joy of Growing Runtz 🌿❤️ The journey of growing Runtz is as enjoyable as the end product. Each day brings new growth, surprises, and the satisfaction of nurturing such a phenomenal strain. Whether you're growing for personal use or to share with friends, Runtz is sure to impress with its vibrant traits and rewarding yield. Stay tuned as we continue this exciting adventure! We'll keep you updated on the progress, sharing all the green goodness and joyful moments along the way. Happy growing, everyone! 🌿🌟💚 Germination method 🌱 @thecannakan Genetics Runtz F1 @zam.nesia Runtz auto @kannabiaglobal Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #RuntzBattle #KannabiaVsZamnesia #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Harvest went pretty well big long, heavy dense colas very turkey sticky smokes really well has good flavor and smell overall was very happy with the strain