Freue mich auf die nächsten Wochen!

11/17 Week 8 Man I will be glad when this grow is over, if making mistakes promotes learning well... Im a fricking PHD ... Ok progress on Maggie the yellow is limited to the very top as buds are building in particular those a couple inches from the top. Thinking another root drench is in order, cant hurt and letting her dry a bit as a prep. Looks like tomorrow Layla doing ok she exhibits far fewer problems but the same issue are present she is just a hell of plant along with the Runtz which she shares the tent. Thinking about the feeding tomorrow will decide what to do then. They have plenty of time to finish up, had some issues on germination on the grow following so looks like it may be delayed a week from the scheduled 2 weeks. Maggie may need it. 11/19 Have stumbled onto to something it seems. The further I move the lights out, they are now at twice the "ideal" placement of 14" at 28" and the yellowing is disappearing to a great extent. Problem with this of course is not enough light at bud sites not on the canopy which lets face it is most of your bud. It is absolutely something that makes the plants insanely susceptible to light burn. New one for me but maybe some of yall know so making a question of it. Pics at lights out only and I missed today so new pics later if I get back in time. Update : Defoliated and tightened training on all three to spread things out from the center and open up the light and air paths. Raising the lights is working just wish I knew why as lights are higher than crap with little room for more than a few more inches. Would drop the watts to 450 but need the heat to keep the grow room level as our temps here swing 40 degrees all the time. Something I learned with the help of a carbon filter. If things normalize will begin dropping lights to see what happens. 11/20 Setting the lights at 24" as I am not risking yield any further than that on Layla and the Runtz, Have the canopy as level as it can be with Brandy getting the least light being on a coco coir block (heh) for height, which she is responding well to since I opened up the plant and no longer worried over mold issues in that main bud. Have Layla on a milk crate to bring her into decent light as well as the Runtz. She is just a lovely thing building those white crystalline buds. Maggie has turned into a beast at least I know her root ball is huge from the growth above. Seriously defoliated her removing several small lower branches and leaves blocking light and air paths. Next feed will be continuing what seems to be working, Epsom salt and bloom nuets (no calmag with epsom salt) with a foliar feed after lights out which may well be with calmag. Foliar feeding today at lights out, one quart sprayer with 1ml CaliMagic and 0.5ml wetting agent un-PH warmed to 75 F before spraying (our tap water comes out at @50F so...), just trying to hit hard and effective * New Pics after foliar Update Folks its taken 8 weeks and a final piece of the puzzle provided by Grey_wolf resulted in a near full strength cal-mag foliar feeding and the last def bites the dust. See what happens from here but its the first time I have felt good about this grow since the bad time germing at week one. *big sigh of relief* Have a whole list of things I will never do again in soil more about that at harvest. Right now I need to work on why calcium is blocked at the roots but thats another day right now I just wanna look at em. 😁 11/22 Another foliar feed same as before just diluted 30% and all three got it today JIC Cannot find a pale leaf or top and hairs are standing up on the top buds for once and buds building nice on the lower ares the defs were cleared up first. Going to stop the foliars for a few days see what happens but will resume at first sign of need. Maggie has potential even after all this and we going to help her be all she can :D 11/22 Feeding day - Bio-Bloom 7ml - calmag 4ml - Recharge .5tsp / gal at 6.5PH to all three. No foliar today 11/23 The thickness of the hair growth on Layla is amazing! Will try and get pics at lights out of it if my crappy camera will catch it. Never seen anything like it, once again THIS this is what we intended by growing Stardawg :) Update: Pics and vid hope it comes through well enough as for the green in that tent and the dense hairs on Layla

Semana 19 agosto - 25 agosto Feed day- 20 e 23 agosto

Da oltre venti anni che coltivo e sono sempre più felice della qualità proposta da queste magnifiche banche semi! Complimenti di cuore a chi ha selezionato e creato queste varietà autofiorenti. Crescono rapidamente,resistono agli afidi e alcune sfiorano il metro di altezza, tutte insieme sembrano una mini foresta! Iniziano a fiorire gradualmente ed essendo molto diramate tutte è spettacolare nel vederle! Appare la prima resina e sono in ottima salute. Sono felice fino ad adesso perché se guardate foto e video vi rendete conto che qui nel centro Italia in outdoor biologico abbiamo il migliore clima che si possa desiderare anche se questo 2023 fino a metà maggio ha piovuto tantissimo e ci sono stati sbalzi di temperatura, ciò non è stato un problema per queste varietà così forti e abbondanti! Adesso la magia è iniziata, il caldo è arrivato e non vedo l'ora di vederle piene di infiorescenze tutte! Si procede felicemente, un abbraccio a tutti!

Day 7 - 21/09/23 🌳 OG Kush is growing well. a nice healthy shade of green, and a decent height too. although the first leaves are a little odd looking to me. maybe its a phenotype thing? 🤔 Day 10 - 24/09/23 ok so i saw this growth on my OG Kush, which was not there last night... mold? mycelium? what the hell is this? 65W LED hanging at 14" running at 80%, 18/6 light schedule. Just using water to keep substrate around seedling hydrated. roughly using around 200ml every 24hrs.

Week 6 of flowering 10/23/24 Changed nutrients to fit week 6 Buds are getting even bigger and thicker. Defoliated a little. Noticed a PH of 4.8 in runoff, same as the late stage of flower in my previous grow. After lowering feed EC, CalMag on max strength, flushing with 0.8ec nutes for 3 days in a row, nothing changed and PH stayed the same. Read in a forum thread about constant low PH in the rootzone when growing in coco. Got great info about CEC, water, nutrients and little chemistry from a detailed explanation. (https://www.icmag.com/threads/recurring-problem-with-low-ph-in-coco.338385/page-2#post-10843765) Flushed plants with tap water + calmag, PH 6.5. Used 120L total for 4 plants in 2 days. 1st day: flushed after lights on, did not water until 2 hours before lights off and flushed again. Runoff PH went up a little, but not to the correct range. 2nd day: flushed after lights on and checked runoff EC + PH, of each plant. Fortunately, PH got corrected to 5.8, and I returned to automatic watering 4 times a day (with 10%-20% runoff). Thoughts: In the last grow, I thought I had a problem because of salts buildup in the media with constantly low PH in late flower. I didn't fully correct the problem till chop day. Same problem here in the same stage of flower without the salt buildup. After reading every forum I could find about the problem, I understood that my bloom nutes were the main problem because of their chemical composition. The coco ability to exchange ions lead to the low PH in the rootzone. It got worse quickly because I did not use any tap water with the feedings, so the PH could swing easily and drastically without resistance. After I looked online for the T.A. feeding chart, I saw they used TriPart Grow till week 7 of flower, the Nitrogen type they are using will up the PH. CocoForCannabis chart that I'm using, has not enough nitrogen to combat the bloom nutes PH down effect in flower. It gets even worse with RO water because there are no minerals that can resist PH down. Now I'm using 30% tap water with rest RO water, T.A. TriPart feeding chart with calmag and silica. Hopefully I have corrected the problem for the rest of the grow. It wasn't easy, because there were lots of variables that worsened the problem quickly. Now I'm checking runoff PH and EC daily. Update on next week :)

Day 14 - Clay balls arrived, all looks good.... 😎 **the rust and damage on the first leaves is nothing to worry about, the ice cream container water level dropped below the root level, fixed it, but was cool to learn how fast hyrdo dmg can occur.... 👍 Day 17 - Lookin good... vid.... 👍😎👊

24 HOUR CONTINUOUS LIGHT FROM GERMINATION TO FLOWER. I HAVE ALWAYS RAN 24 vs 20/4.I have had 0 pests in 3 years or growing and I use my lights and 0 heaters. It’s a set up that works for me. I have ran 20/4 in the summer to reduce heat but I didn’t feel I had the same results. Any one growing auto should try at least once.

Нехай росте! Слава Україні!

Very happy

10/05/22 watered. 10/09/22 mid-week found WPM on plant. Bathed in sodium bicarbonate. Also plant is now in bud cycle.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 2 since time change to 12/12 h. Hey everyone :-). Yesterday it was put into bloom and can now develop beautifully 👍😃. In the next few days I will remove the bottom shoots and add 2 g GHSC Powder Feeding Bio Bloom per l cocos. Of course, cuttings were cut into the flower before moving 👍. I wish you a lot of fun with the update. Stay healthy 🙏🏻 You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Needed to defoliate to create airflow and start shaping the ladies. Stretching out the lower colas across the base. Fimmed the ends of the longer stems to get a split going for more colas. Recharge added to feed after stripping 30%+ of the lower canopy. Will turn to flower in a week or too. Notes: slow growth due to the lower heat in the tent. Okay with that because the Lecky bills have been huge with all the price gouging going on.

Going well

My Soaptini plant is looking amazing! The leaves are a really vibrant green, and they have this cool, almost waxy texture that makes them look super healthy. It's growing nice and bushy, and I'm loving the overall shape. This one's definitely a showstopper, and I can't wait to see how it blooms. Stay tuned for more updates on this beauty! The weather has been absolutely gorgeous this past week! We've been hitting that sweet spot of 70 degrees during the day, perfect for getting outside and soaking up some sun. Then, it cools down to a comfy 50 degrees at night, which is ideal for sleeping with the windows open. I've been loving all the fresh air! I finally got around to building that little wooden planter for my windowsill. It was a fun project, and now my regular plants have a nice new home. It really brightens up the room, and I'm thinking of adding some herbs to it soon. Maybe I'll even try growing some basil!

This is the moment all LST fans around the world been waiting for… lol so week 3 is behind, seems I have some mess-ups with the watering, because I’m really confused about the amount and frequency of watering. the info i get from the internet is contradictory “dont overwater” vs “pour till it runs out”. Yesterday (day21) finally bought a fan to make them dance a bit, and overnight I noticed a visible reduction in stem movement, meaning they reacted with stronger rooting (I want to beleive 🤓). and today 25.09 (day22) I’ve performed LST. first thoughts were “not as easy as it seemed on youtube” but then got the hang of it. the biggest challenge is the soft pot having so much give and its hard to fix the wire in place. btw, used 2,5mm electrical wire, because couldn't find a thick gardening wire. No issues in the process. setting up a timelapse to see how the lst works out and a little “side project”. Always wanted to buy a plant of rosmary and grow it. I found an old aluminum milk(?) pot in the garbage the other day, so decided to make a pot out of it. turned out pretty nice, I think