The Grow Awards 2026 🏆
Likes
Comments
Share
Really starting to frost up and beautiful smells ranging from sweet earth to danky dank. Struggling 2 keep humidity down and had 2 cut a small amount of mold from Finnish frost:( added trays of moisture crystals 2 combat but need a dehumidifier.
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
8
Share
@ProKush27
Follow
By the start of the week I’ve noticed magnesium deficiency on plant A and B, so I started adding Biobizz Calmag on Froglord’s kind recommendation. Otherwise I started slow defoliation process and I’m currently removing around two leaves per day. Plants definitely grew larger than expected but I’m not mad :D. They’re taking a bit longer, but it should be worth it. I’m expecting harvest on plants C and D soon.
Likes
6
Share
I was learning a lot just about water itself. Currently the method I use was inspired by an article I found on Canna Nutrient’s website: Rainwater + tap water to EC 0.2 (100ppm) Add CalMag to reach EC 0.4 (200ppm) Ph down (first diluted a small amount in water) Nutes Day 58: Increased the feed to 3/4 Day 59: Replaced the tap water to liquid silicon. Rainwater + Liquid silicon to EC 0.2 (100ppm) Add CalMag to reach EC 0.4 (200ppm) Ph down (first diluted a small amount in water) to ph 5.6
Likes
15
Share
This week was very hot. They stressed a lot some heat stress and some fan stress that came up to uptake look down. The weedding cake was that must sofer. Shr was still recovering from that led issue...and she gets direct sun light in the hottest hour. Black cream in the other hand sofer a lot with fan stress bleaching the leafs in direct contact. Couskush its a beautifull lady and growing nice. Bomberry is late but showing some promissing buds. Chears BrotherHood
Likes
72
Share
@BodyByVio
Follow
Day 65 : officially 1st day of flush . Changed the reservoir with fresh water and 1.2g/5 gallons of Yucca extract and 5ml/gallon of Cleanex from Botanicare . Day 68- I did some defoliate. Few more days until harvest.
Likes
25
Share
Week 5 of flower for Lemon Orange by Greenhouseseedco, 1 of the phenos is a super super early developer, when compared to the other 2 its night and day difference for sure. The other 2 phenos are also struggling with the feeding abit again... they just seem to be such heavy feeders... I'm not sure if ive got a Nitrogen problem or magnesium? If someone wants to throw out their thoughts that would be great.
Processing
Likes
3
Share
@Budz420
Follow
Great start for week 10 did some defoliation,they look so happy and healthy, I had issues with the plants they responded well to LST and defoliation. I make sure to remove some leaves here and there. The most important thing to me me in this stage is to make sure they have perfect airflow.
Likes
28
Share
Hey everyone :-). This week she continued to develop very nicely 😍. I started with topping 😊. The training took it very well and after 1-2 days it grew again immediately 👍. I decide spontaneously how often I will train it 👍. It was poured once this week with 1.2 l. Otherwise there is nothing to report this week. I wish you all a lot of fun until the next update. stay healthy and let it grow 😀 You can buy this Strain at : https://www.royalqueenseeds.de/feminisierte-hanfsamen/220-pineapple-kush.html Type: Pineapple Kush ☝️🏼 Genetics: Pineapple x O.G. Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Royal Queen Seeds Easy Boost Organic ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
16
Share
4/1/25 She has super long, almost spider web type pistils that are super beautiful. I can see the calyxs packing on under neath the pistils and forming the buds. She has a nice stacking to her. Maybe 6+ nodal cola. Shining, fuzzy, glistening trichomes stretching out across the fan leaves. Top Dressed with 2Tsp of Bloom, 1tsp of Microbe Charge, and 1Tsp Bloom Booster. Ive also been trying a new method for the top dressing efficacy. I got the idea while watching build a soil using the earth box. I have started covering the soil with some aluminum foil to kind of act as a cover so the feeder roots will come up to where the top dressing is. which seems to be working fairly well and simply. 4/6/25 She is producing super nicely so far. Seems to be thinner, longer buds. But i can visibly see the buds forming calyxes underneath the pistils. Very bulbous and full calyx stacking 4/7/25 the buds are starting to pack on some weight. everything looks happy and
Likes
14
Share
@E_wenty4
Follow
Buds starting to form nicely 😏
Likes
325
Share
Hallo to You all my familly and usual visitors. Thank you for stopping by and all the likes and comments....You make my day! I gave the Blue Cheese a trim on 5th december and gave her four days of darkness, the chop was performed on december 9th I took a lot of photographs and videos commemorating these events for you to enjoy :) I think she came out quite decent especially considering that she had some monster/deformed leaves till the 4th week of veg. also looking back I should have moved her to the bigger place in that time...she would be far more symmetrical ;) It was a joy to work with Mars Hydro and their equipment in this grow. A big thanks to the Mars Hydro team for this opportunity, you truly provide first class grow kits and lamps. That's all i have for you till the drying & curing process is over I will update then. I want to thank you all for accompanying me in this journey, all the likes and comments...You growmies make me feel here at GD at home thank you 🙌👊😇
Likes
99
Share
I have already said everything, in principle, I advise everyone to grow this variety, I got an amazing tree half purple with giant cones and a large harvest, I am delighted!
Likes
2
Share
Hoping for a big finsh a few plants are a couple weeks behind but you czn see it doesn't take long for them to flower and take shape