Likes
Comments
Share
Day 28/06/2024 I chopped the first one, day 08/07/2024 I chopped the second one and today day 09/07/2024 I'm going to chop the other two (bigger ones) Very satisfied with all this, just the beginning and you will also see more diaries around here! These plants were perfect for a newbie like me, but I also learned that I'm very good at this, all the knowledge were in my head. See yall! 😎👻👽😈 Edit: great smoking, relaxed but not much couch lock, good after a day of work, will try on days of to see, I’m fucking happy bros!!!!!
Likes
14
Share
@Wenz004
Follow
F-MILF takes 70 % of my tent now...wtf Hope all this green gives some good buds at the end. Deficiency from last week is under control...added some Silicate from TA...no idea if that helped or anything else...of course...there is too much light photons for the above area...but wtf I cannot do the plant smaller...lamp is on 75% now und lower would be bad for lower buds. NL untopped (F-MILF) getting this week: (TA nutrients mentioned above are for NL topped from other tent...pictures follow) Aptus Topbooster 6 drops/l (increased) Aptus P-boost 12 drops/l (increased) Aptus regulator 3 drops/l Aptus All in one 0.6 ml/l Aptus CaMg 0.6 ml/l TA Silicate 0.4g/l 4-6 litre each day nutrified (thats a real problem) F-MILF cannot get enough...just makes me poor that fat big milf
Likes
5
Share
Způsob klíčení Sklenice s vodou, papírový ubrousek, kokosové peletky. Ve skleníků 3 dny, na topení, vysoká vlhkost. Vyrostly 4 z 6 Sázeno do stanu 2.1.2023
Likes
17
Share
@BLAZED
Follow
Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily move the pots in and out the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Before i watered them i weigh the pots. Dry weight: Chemdog #1: 4.2 kg Chemdog #2: 5.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Chemdog #1: 3.9 kg Chemdog #2: 4.7 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest The buds are looking good! Sadly i dont have a timelapse for this week.
Likes
12
Share
Hey hey ! Trying to limit the stretch and it’s good ! Flowers started to show them faces !
Likes
18
Share
I'll go on vocation for 3 weeks so will let my mom take care of the girls. Amnesia will probably be chopped on day 80 (as per breeder's info). Will update y'all after I'm back. Cheers!
Likes
13
Share
acho que ainda consegui produzir uns tricomas com as correções da água, mas como o estágio da floração já estava bem avançado, as folhas começaram a descolorir muito cedo, tive que colher 3 plantas precocemente, as outras 3 menos vou tentar seguir mais 2 semanas, não estão mostrando tricomas Ambar ainda!
Likes
10
Share
@Budhunter
Follow
Unfortunately I spotted one bud with bud rot on my gelato plant. I flushed it on day 91 of cycle, day 54 of flowering. Today is day 94 and it seems it has not spread out to any other buds(happy days) .. I am watching it closely everyday and also to see how the trichomes are going.. breeder says 65-70 flowering days to be ready.. let’s see.. if I spot another bud rot I will probably harvest it.. I hope that will not happen.. let’s go
Likes
6
Share
Likes
66
Share
@Hashy
Follow
Week 13 9th week of flower. Light settings 12/12 on at 9.00am off 9.00pm Light power= 100% 240w Radiator settings LIghts on Turn on if temp drops below 21.5c Turn off if temp goes above 21.5c Lights off Turn on if temp drops below 18.0c Turn off if temp goes above 18.0c Extractor settings temperature 23c with 1c steps Humidity 35% with 2% steps Max speed 10 Min speed 4 VPD aim 1.0-1.4 DLI aim 35-40 Wednesday 19/4/23 Day 85 (Day 57 flower) Massive defoliation. Thursday 20/4/23 Day 86 (Day 58 flower) Nothing Friday 21/4/23 Day 87 (Day 59 flower) Flawless 2ml/L Ec=0.4 Ph=7.1/7.1 5 drop Ph D Ph 6.3/6.0 Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Flawless Ec=0.4 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Autofeed 8 runs (2,3,5,10,15,15,15,15 total 80 mins) Water Ec=0.2 Ph=6.3/6.0 2L left Roughly 2L each. #1 0.1L runoff Saturday 22/4/23 Day 88 (Day 60 flower) Sunday 23/4/23 Day 89 (Day 61 flower) Cut scrog net and moved plants about. Monday 24/4/23 Day 90 (Day 62 flower) Raised plant #1 Tuesday 25/4/23 Day 91 (Day 63 flower) Manual water 2.0L This is the last weekly update for the grow as they are all being chopped sometime next week. The next update will be the harvest update in a few weeks time once its dried and had a 2 weeks cure. #1 Wedding Cheesecake FF is ready for the chop. She is very sticky, trichomes are just about where I want them to be. She is smelling absolutely gorgeous. Power used for week Light (2.69+2.68+2.68+2.68+2.69+2.69+2.68)=18.79Kw Extractor (0.58+0.58+0.58+0.58+0.58+0.58+0.58)=4.06Kw Fans (0.92+0.95+0.97+0.94+0.90+0.93+0.92)=6.53Kw Dehumidifier (++++++)=Kw Radiator (1.39+1.45+1.38+1.45+0+0+0)=5.67Kw Water pump. (0+0+0.03+0+0+0+0)=0.03Kw Total for the week=Kw Back in a few weeks with harvest and smoke review. Thanks for stopping by.
Likes
2
Share
Likes
1
Share
Se preparo una solucion de Mills Start R: - PPM : 100 -pH : 5.8 Se submergio cubos de roca de lana dentro de la soulcion. Cada semilla que se germinara se paso a un cubo de roca de lana y se mantuvo sin luz. Cuando las plantulas salian del cubo, se pasaron a otra bandeja de germinacion con domo de humedad bajo una luz T5.
Likes
2
Share
Plant is growing good. Still really pretty to me. Hoping to flip around day 60
Likes
21
Share
@DreamIT
Follow
Sponsored by: AMSTERDAM MARIJUANA SEEDS-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 28/7 cut made, clone in rooting. Monday entry into bloom 2/8 reacted well to the cut and has already recovered well. I hope for a nice big plant __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Professional site, exceptional genetics for over 25 years and a new and very nice mascot! ✅https: //bit.ly/Amsterdammarijuanaseeds __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
29
Share
Welcome back at week 3 in vegetative stage of the Sensi Amnesia feminized by Sensi Seeds. She did a good progress during last week and developed 5 nodes already. I will give her a little more time before I top her and start the manifold. She is very thirsty in her small pot. I think I will repot her in her final pot before I start mainlining. So far, the conditions seems to fit. 26 C during day and 20 C at night with 50% humidity. Leafs and new branches developed good and she is a strong lady without any issues. Day 23: I repotted her into an 17 Liter pot with BioBizz Light Mix and it was absolutely necessary because the root mass of this lady was insane. Almost the whole pot was with white, healthy roots. I never experienced such a strong root structure in only 3 weeks from seed. She will get 2 days of recovery time before I will top her. Day 26: She got her second cut to develop 4 new main stems. I started my first attempts in mainlining this lady. Hopefully she will recover fast and respond good to this technique. Keep in touch ! Cheers HighZenBerg
Likes
32
Share
Fast grow from day 7 till today day 14. I have added a humidifier to help get my RH up cause it was too low. It is still not as good as i would like, but its okay. I started doing some LST and leaf tucking on Day 12 on the biggest plants and those i felt like could benefit from it. Today i lowered my lights so now my MH 600w light is down to 50cm from the canopy and the LED is at 45cm. I also bought a Lux meter (Urceri Cloc – Lux Meter) to measure but im really confused about it after it showed that the LED puts out way more Lux than the 600MH but its supposed to be better at measuring HID light and not catch all the light from the full spectrum LED but still the LED seems to work better. You can judge yourself with the video ill post with this update. The 2 biggest plants is under the 600W bulb though, so there is alot to take in count at this moment. Also i removed one more plant, so now the total is 16 plants and i will continue experimint with the height of the lamps. I would love some feedback 😎 Day 15: I took both lights up to 64cm.. Changed the MH bulb to a Full spectrum Bulb which gives more light to my girls Day 20: posted new pictures, its going good until now, i just wish they were a little bigger but i have many different phenotypes it seems. When they go into flower i may add 400w more hps, but only if they will get big enough
Likes
1
Share
La planta cubrió exitosamente toda la superficie, tiene un sistema radicular sano, el único detalle es que cuando se hace el cambio de agua y se quita la red la planta se estresa un poco al volver a colocar la red
Processing
Likes
4
Share
Day 14 of flower and all 4 plants have stretched over a foot in the last week. Should start putting all of their energy into flowering now. Looking really good so far. Really, really good.
Processing
Likes
Comments
Share
Hello everyone, So ended up finding this girl with my no name seeds. I expected this one to be a regular seed never suspected it to be a auto. Shows you, you never know what your smoking, lol. Even tho she's small she's doing and smelling good. Lets see how she ends up... See you guys next week... 🤘🤘👍👍👊👊👊