Update coming.

These two girls are starting nicely. Still nursing the third pot.. I’ll update on it later as well. ** Update ** The third girl popped on 9/8. She’s looking healthy as well

She is vrowing strong and healthy. My tent its outside of my house. and i need to take out to take some.picture. i aleays fivht with the worms. One week more fornthis lady.

🍬

Es wurden alle drei geköpft und zwei im gesamten in die sogenannten DryBags die ja jeder empfehlen tut und die ersten Tests sind sowas von gut ab jetzt nur noch Mit DRYFEM Resultate vom smoke. Kommen noch 🏼👌🏼👍🏼

Her buds are getting really nice and plump. I'm doing trichome checks every other day or so. Only seeing amber on the sugar leaves

Спокойная неделя в плане тренировок, без дефолиации. Довольно хорошо сформирована крона, я ничего не делаю с ней, я просто отпустил её в росте и в коротком темпе междоузлий она проявляет свои цветы даже в таких местах, которые скрыты от света. Цветы по всей площади относительно равномерно растут, запах по интенсивности "Нормальный", пахнет так же - скунсом. Очень ветвистая, с толстыми, короткими ветками и короткими междоузлиями в 3-5 сантиметров. Немножко подросла, на 10 сантиметров, поэтому приподнял лампу на 10 сантиметров. Мощность лампы 70%, от растения 60 сантиметров, 25000lux, лампа слегка теплая. https://www.viparspectra.com/products/xs-series-xs2000 при покупке примени код и получи скидку 😀👌 код: GDVIP Спасибо за комментарии и оценки, друзья! Цветение продолжается!

Week 17

These 2 girls are simply amazing in there own way... Minus the potassium and phosphorus deficiency they have put did themselves again.. the trichome productions is on point! They are sticky, dense nugs on both plants.. the gorilla punch is a mutant purple pheno.

16th June We're drawing to a close. I'm not sure how much longer there is to go, we're well into the expected 55-65 day flowering window at this point. It's about to shut. At this point my past plants would have some mild chlorosis from nutrient burn or lockout, or at least some yellowing of leaves this late into flower as the plant goes looking for resources. I think the huge volume of soil works as a magnificent buffer against common errors. I feel like she really filled out the space we gave her beautifully. Makes me wonder if topping maybe three times might have given us a very interesting result, and much better in terms of light intensity per bud. I'm used to some chlorosis as a sign I look for that the plant has decided we're at the end of the road. So far, we're evergreen from top to bottom. I'll have to rely on inspecting the individual trichomes for change. Speaking of the main cola, it's huge. It's fat, it's girthy. Weighty, even. It's a sight to behold. It's also full of mould. See photos, I tried to open things up a bit for the camera. None of the other flowers seem affected. I'm honestly not surprised in the least, but if I knew to open the bud up a bit I would have done so. Might not have succumbed to the creeping grey death. About half of it is salvageable from a hasty first assessment. Fingers crossed as always. Looking forward to sampling, not long now :):):)

Una settimana colma di cambiamenti, é incredibile come le piante senza nessun tipo di training si adattino perfettamente tra di loro allo spazio circostante, quanti sensori possiedono le piante? Come comunicano tra di loro? mi ha sempre affascinato...

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

She's coming along, slow but steady. Roots now emerging from sides (not bottom, weirdly) of rockwool cube. Solution below is at EC=700 uS/cm and PH=5.8.

Week 16 – Veg Phase This week marks week sixteen of vegetative growth, and things are staying right on track. The plant has been growing steadily with thick, vibrant foliage and a solid structure. She’s filling out nicely, with short internodes and a rich green color that shows she’s perfectly dialed in. I’m still unsure whether I’ll top her or just let her grow naturally. It’ll depend on how she stretches in the next few days, but either way, she’s responding beautifully to her environment. The pH remains stable between 5.9 and 6.0, and the environmental conditions haven’t changed — temperature and humidity are holding steady. No signs of stress or deficiency, and the overall growth rate is consistent. She’s starting to take up a bit more space, which means she’s getting close to the tent’s limits. If I decide to top her, that’ll help manage her height and open up the canopy for better light penetration. For now, I’m keeping the same routine — steady feeding, balanced environment, and daily observation. The plant looks strong, healthy, and well-balanced as she heads toward the next phase. That wraps up this week’s update. Next step: final decision on topping and preparing for preflower.

Only water in this plant, i made a good soil, i wont need of nutrients for a long way, first time trying a bonsai, any help is welcome. Peace✌️

Going

Strawberry Truffle - White Truffle x Red Pop & limited seed it came with Chem 91 x Red pop

Got everything hung up. Stripped the fan leaves and broke down into sections. Run 60/60 or as close as i can get until the stems snap.