Hopefully I can sex by the end of this week. Either way I will be throwing into flower next week. Day 39: shortly after the photo shoot I trimmed the largest fan leaves off 1 & 2 to help promote some bushiness. Im likely going to kill #3 in the next day or two as I am almost convinced it will end up male. Day 40: Reservoir changed, lollipopped and defoliated

Die Umstellung auf 12/12 ist passiert, jetzt beginnt der Stretch und dann die Blüte. Die nächsten zwei Wochen wird nichts geschnitten, nur die höchsten Tops werden auf eine höhe gebracht. Ich bin sehr zufrieden mit dem aktuellen Stand! :)

Seguimos otra semana más de avance de este rincón de amnesias! Todo se ve en orden alguna que otra saturada de abono otras perfectas y otras un poco estresadas,por qué las mantuve cerca del foco pensando que al ser pequeños y de 100 w necesitarían estar más cerca pero de todo eso equivocado.. en el siguiente ya sabemos. Estamos ya con 58 días de floración y estimo que estaré con ella hasta el día 78. Está vez la dejaré madurar al punto de conseguir el mejor sabor posible y un efecto relajante nada paranoico. Seguimos metiendo abonos esta semana pero vamos a combinar un riego libre de solo agua y azúcares.

Più alta e magra di tutte...da vedere l fioritura ma molto molto bella !!!

ALRIGHTY THEN ......... It's Harvest Time 😎 Being it was my very first purple 👈 I couldn't of been any happier 😁 I will definitely be growing this again soon 👈 I big thanks to Fastbuds for the seeds 👏 And a big thank you to NutriNPK for the nutrients 👏 www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code .... And most of all , I would like to 👉Thank everyone who has checked out my diaries and left comments and likes 👍 It's very much appreciated👈....... UNTIL NEXT TIME 👋👋👋👋👋👍

My first attempt of growing with my own DIY setup. Specs : - PC box 19x42x43cm (after a few weeks I changed it with a bigger carton box) - 4 x Bridgelux Vero 10, 3000K, 9.1 Watts, 80 CRI, 270mA, 143Lm/W - Mean Well HLG-60H-C350B 70W LED driver - 100k Linear Potentiometer for dimming lights - Aluminum profile 30x7cm for mounting LEDs - ESP32 Dev Board - DHT22 temperature & humidity sensor - 2 x Noctua-NF-S12A for ventilation with PWM control by microcontroller - 3lt pot - Blynk IoT app for remote control Started germination of 1 feminized Northern Lights seed from SensiSeeds using paper towel method. Sprayed with some water and store it in small plastic food container. Seed popped after 24 hours and after 48 it was ready for pot. Unfortunately didn't take any photos of the process.

Beginning of week.. Such weird bud structure.. Love the smell.. Fruity asf.. Since nights haven't been as cool as they were before, the colors seem to have stopped on the calyxes. The old ones are still purple, but the newer calyxes don't have any coloring.. Still a pretty mix of purples and greens.. The leaves look like they should not be an issue when trimming whatsoever.. They are huge.. Even at the tip top of the colas, so far.. The lollipopping could have been kept a node or 2 lower.. I should have nothing but massive top colas tho.. I can live with that.. Lol. I'm still finding my sweet spots with alot of things lol.. Trying to use a LUX Meter and convert to PAR to figure out how much my girls are getting. Lately, I've burned a few tops.. Not too bad.. didnt hurt the yield or trichomes too much.. But noticeable.. So I'm trying to find the sweet spot and still be able to just cut the power of the light down, lower the light toward the canopy so I can also avoid the summer heat which is coming.. So far, I can run this light at 50%, but keeping it about 14 inches above the conopy.. By harvest, I should be able to get away with 75% power at about 12-14 inches.. Just one plant and the footprint of the light is pretty wide.. So it should still get branch to branch pretty evenly.. Stoned ramblin hah! Mid week.. Wow.. These colas are getting massive! She didnt stretch much at all, if any. So, I lollipopped a bit high, in my opinion. But these colas are gonna be so massive, it shouldn't even matter at this point lol. She has ALOT of leaves and they are REALLY getting thick in there.. There isn't much airflow getting around these colas.. I should probably get a fan on there.. Or maybe defoliate a bit.. Not sure really now.. But damn, these colas are HUGE!.. they aren't very long, but holy shit there are getting so fat! Very fruity scent.. Pretty strong but still has plenty of time to get even stronger.. Wow. This autoflower is nothing like the White Widow auto.. That's for sure.. The white widow buds stay kinda small.. Airy.. They must have used a different auto to breed with.. Or maybe the white widow reg. version just isn't a big yielder.. Blah whatever.. This girl needs something changed quick tho.. Either a fan or defoliate more.. Or both.. A growmie just had some bud rot on one of his heavy yielding autos.. Never had the issue before and I don't plan on having it EVER. This is a very good, productive week so far. Next day.. I had to defoliate for sure.. And even pulled the branches down a bit more to help open her up some. I did not expect these colas to do this at all.. I even raised up my oscillating fan so that it's moving air above and below the canopy pretty well now.. Should be fine 🤞... Another thing.. The leaves are SUPER dark green.. The tops have some clawing and the leaves that are hidden away (mostly sugar leaves) do too.. I brought the FloraMicro down to .66 mL/L but I think I'm going to go down a bit further.. My last grow did this too and I went down to .5 mL/L and still ended the run with the issues.. So.. Damn.. Should I just cut it out completely? The colas are already so damn huge.. I just need them to swell up a bit and I can already tell I'm gonna be more than happy with the outcome. I guess I will just bring it down to .33 mL/L.. Eaiser to measure out that way for me too.. She shouldn't struggle or even notice any change.. The only thing I could see hurting is the lack of the Calcium in the FloraMicro.. But I'm going to see if bringing the Micro down that much will help this claw crap from spreading.. So still very happy with this run.. Not bad, ILGM.. Not bad at all.. End of week.. Yeah definitely going down to .33mL/L on the FloraMicro.. I'm sure she will be fine till harvest. No other issues should pop up. She is looking and smelling gorgeous as fuuuuck! She is already so dense and thick.. This is gonna be a nice harvest.. On to the next!...

Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags

She looks suuper healthy and happy, she's gonna produce some big nice colas, I love the aroma of this strain the 5 phenos I have got the same smell,very sweet and floral,looks like it's gonna be a nice hitting indica.let's see how she performs guys! 😍💚

- Ich hab die erste Woche des Biobizz Allmix Düngeschemas gestartet und gebe wie immer erstmal vorsichtige 100%, da meine Erde an sich durch den Kompost recht potent sein sollte. - Außerdem hab ich mit meinem Calmag-Rechner mein Leitungswasser angepasst. Die Werte könnt ihr auf den Bildern sehen. - Den PH-Wert passe ich ebenfalls auf 6,5 an.# - Die Lampe bringt zur Zeit etwa einen PPFD-Wert von 350 - 360 µmol/s/m² bei 18 Stunden Beleuchtungszeit (DLI von 22 - 23 mol/d/m²). Sie wird aber nur eingesetzt bis es warm genug draußen bleibt. Tagsüber stehen sie jetzt schon draußen, sofern es nicht regnet oder stürmt. Die Guava macht sich hervorragend und sie ist sehr uniform mit den anderen Fastbuds Strains bis jetzt. Sieht gut aus finde ich 💪😁👍

Topped them and let them and grow for 1-2 weeks before switch to 12/12. I just want to test the Taste. And if i like it, i make some bigger GG4.

Cut the leaves on the 8 week of flower. she have very sweet smell and glue trichomes. Very nice plants ✌️🏻.

This baby's doing great

EXOTIC SEEDS EVERY ONE I HAD IS WORTH IT.. Must get more of these.. i already know its a killa...mars hydro frost maker ❤️❤️❤️growing💯💯❤️❤️🏆🏆🏆🏆🏆🏆🏆🏆

First the plant had some weird growth but she recovered!

Finally a sunny day in the midst of our insanely wet spring. Rain, rain and more rain, and rain in the forecast. The Japanese beetles have shown up, so I’ve made giant canna-condoms to keep the girls safe from the insatiable munchers. The girls look good, one is much smaller than the other, I call her Minnie.

Week 11 (26-8 to 1-9) 26-8 Temps: 20.5 to 26.1 degrees Humidity: 50% to 56% 27-8 Temps: 20.7 to 27.3 degrees Humidity: 50% to 56% Watering: Both 1500 ml. (Only Calcium) EC: 0.4 PH: 5.6 Dry Weight: Both 2.7 kg. 28-8 Temps: 21.5 to 28 degrees Humidity: 51% to 56% 29-8 Temps: 23.3 to 27.4 degrees Humidity: 55% to 62% 30-8 Temps: 19.9 to 27.7 degrees Humidity: 50% to 60% 31-8 Temps: 20.2 to 26.6 degrees Humidity: 50% to 55% 1-9 Temps: 21.1 to 29.1 degrees Humidity: 49% to 55% Watering: Both 1000 ml. EC: 1.4 PH: 5.6 Dry Weight: Both 2.4 kg. Recalibrated my PH pen and it was only 0.1 off, so i dont think the leaf problems are PH related.

some on the leafs are clawing come be due to nitrogen toxicity

One last week and chop chop. Strawberry n cream really looks like it could go another few weeks but I’m done lol. They all smell amazing!!!