SOOOOO close now and the smells are sweet pungent very dank blueberry top with a garlic finish. The Resin on this thing cannot be captured on photo. It's unreal. Amber is starting so it wont be long now.

G13 auto is doing good under the Medic Grow Mini Sun-2. She is in the Athena blended line nutrition. She is in bulking now. I had a little mistake. I accidentally hit the on off value for the air and shut it off to this plant. So it went for a few days with no aeration. I immediately changed the solution, and got the air going again. The solution was rancid from sitting. Hopefully I can ride out the rest of the grow with a decent result. Thank you Medic Grow, Athena, and Weed Seeds Express. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

The Bubble OG plants are looking really good. They're all pretty big and have a similar structure. It'll be fun to see how they develop their own personalities as they keep growing. Well, another year has come and gone. Yesterday was New Year's Eve, and I want to wish all of you a happy and healthy 2025. May this year bring you all the things you've been wishing for. Let's make this the best year yet!

2 of my Blueberries were root bound one more than the other.. i transplanted them into soil in a bigger pot. I Have a bunch of strains going on but one vegging mother soon ready to get in under the CFL. Loving the HPS tho wont go back to LED any time soon. Feeding with CANNA terra nute line and using the last Bud candy and big bud from Advanced Nutrients before going full canna. The monster crop was a succes but it took long before shooting. Hope my other clone will do better. I have a very healthy strawberry banana that will be my motherplant as well as a sweet valley kush that are just a seedling now. I am very happy with the HPS from phillips it work wonder in my oppinion :) I started 12/12 as well this week

June 7th: We had a Thunderstorm roll through our neighborhood yesterday afternoon, with forty mph gusts and it almost knocked over a few plants, managed to grab what we had and prop up the stems for support. Hoping they weren't too stressed after it all!

Plants are doing great. One more week of nutes and then ill start a 2week flush.

Third week of vegetation and the plants, especially the autoflowering ones, have grown a lot approximately 7 cm in 7 days, they have grown both long and wide, I think this harvest is worth it!!

Ok, so this week I did the initial flush and from now on going to be only giving her plain water. The plant has gotten a bit more swollen with a bunch more trichomes than it had before everything is still looking pretty nice to me no problems that I can see but this ain't the end yet so we will see how this next week goes over pce✌️

Ale, cortada. Me gustó la planta sobre todo el vegetativo ya que fue muy bien sin mostrar problemas y tal... Ahora, cuando llegó la floración ahí si arrancó todo, igual que la otra, la hyperion, con oidio y araña roja. Recalco que tenía dos plantas mas bien grandes y hermosotas que también lo sufrieron, pero a modo chiste... Una hoja pocha por bichos, alguna con un poquito de oidio.. pero en general resistieron muy bien eso, las otras. En fin, esta planta si que es hermosa, el cogollo central es precioso, una lastima que mi movil haya jodido la mayoria de las ultimas fotos antes de cortarla, por eso alguna se estas últimas fotos se ven mal, miradlas de lejos, mejoran jajajajajaja Bueno, les hice bud washing, o lavado de cogollos y subí las fotos para que se vea, no es video... Quizás en un futuro haya algo con YouTube, pero eso, es basicamente 3 cubos, como no tengo cubos cogí una garrafa, la corte, y le eché 7 litros de agua y 100ml de agua oxigenada (peroxido al 3%), cogí dos tappers grandes, los llene de agua y heche media cucharada sopera en cada uno de bicarbonato de sodio y medio limón exprimido igual, entre los dos tappers y lo mezclé todo bien. Finalmente cogí una olla porque no tenía mas tappers grandes disponibles xD y agua osmotizada (o de botella) pero fria. -Paso 1: enjuaga el cogollo, rama, o lo que quieras limpiar, unos 20/30 segundo en la garrafa con el agua oxigenada. -Paso 2: sacudes un poco lo que hayas enjuagado y lo metes a enjuagar a uno de los tappers con bicarbonato y limón (puedes usar 3, 4 tappers, o un cubo.. al fin y al cabo es cantidad para no hacerlo todo en 3 litros y que acabaes limpiando mierda con mierda :) ). Aquí pues otros 20/30 segundos. -Paso 3: finalmente enjuagas en el ultimo tapper, barreño, lo que sea, con agua LIMPIA (de ahí osmotizada o embotellada) y fria, para que arrastre mejor los ultimos restos. Ya finalmente lo pones a secar unas 3/4 horas en un tendedero o donde mejor pilles, pero con ventilación para que el agua termine de irse, o al menos lo gordo. Ya una vez pasado ese tiempo y que veas que los cogollos gordos, en la parte de abajo (en la cabeza si están boca abajo) están secos, sin agua sobrante vamos, los llevas a donde vayas a secar, en mi caso al armario, que por ese motivo les voy a dar un poco mas de tiempo fuera para evitar subir mucho la humedad ya que tengo la Papaya Zoap secando y le quedará unos 4 o 5 dias aún. Cuando seque, subiré los resultados y fotos del manicurado y todo... Yo creo que va a salir una buena producción y además como la alargué bastante, espero que tenga efecto soporífero que ademas de sabor y aromas, es el efecto que busco en la hierba, que ayude a dormir. Aclaro: el peso en humedo es inventado jajajaja sinceramente, además de que no iba a pesarla en humedo, osea, recien cortada xD, tampoco la iba a pesar teniendo en cuenta que sumergí los cogollos en soluciones para limpiarlos, por lo que pesarían como 4 o 5 veces mas que el peso de recien cortado xD.

It’s getting cold and damp. Fingers crossed for a couple warm weeks into croptober

Trichomes, density, looks it’s all there but the smell which is late to the party. They still got a few weeks to go though so I’m not too worried.

Once again she passes my expectations, late to the show with trichome production. I'm surprised there is purple on the bud, maybe Purpinator does work. I thought I could see hints under the grow lights and thought my eyes were deceiving me, I was just being hopeful. But nah 2 of the 3(under the UV) have developed a beautiful tone of purple. I was never going to bother with a deep freeze but maybe the whole bud will change given conditions, that would be something, fingers crossed. 🤔 was a little skeptical that reducing temps humidity would change density, but it does, buds are solid something I've not been able to achieve before. Rule of thumb is never to surpass 60% RH in the flowering phase and try to progressively reduce it down to 40% in the last 2–3 weeks before harvest. The plant will react as it seeks to protect its flowers, responding by producing denser buds and a higher concentration of resin. Cannabis plants are sensitive to sudden temperature changes, especially in the flowering stage. Extreme heat or cold can impact bud density and overall yields. In nature as a defense mechanism from cold, the plant sensing sudden dips in temperature will attempt to remove the pockets of air within the bud, it achieves this by compacting itself in doing so to better protect itself from cold snaps which are normally indicators in nature that worse weather is on the way. Terpene levels are the highest just before the sun comes out. Ideally, you want as many terpenes present in your plants as possible when you harvest. Cannabis plants soak up the sun during the day and produce resin and other goodies at night. The plant is at its emptiest from "harvest undesirables," so to speak,k right before the lights come on. Freshly cut buds are greener than dried buds because they still contain loads of chlorophyll. However, when rushed through the drying process, the buds dry but retain some chlorophyll, and when you smoke it, you will taste it. Chlorophyll-filled buds are smokable, but they aren’t clean. Slow drying gives the buds enough time and favorable conditions to lose the chlorophyll and sugars, giving you a smoother smoke. How the plant disposes of the chlorophyll and sugars by a process of chemically breaking them down and attaching the decomposed matter once small enough to water molecules, which then evaporate back into the ether. Time must be given to the process to break down the chlorophyll and sugars. Think of it like optimizing the environment for decay. Plant growth and geographic distribution (where the plant can grow) are greatly affected by the environment. If any environmental factor is less than ideal, it limits a plant's growth and/or distribution. For example, only plants adapted to limited amounts of water can live in deserts. Either directly or indirectly, most plant problems are caused by environmental stress. In some cases, poor environmental conditions (e.g., too little water) damage a plant directly. In other cases, environmental stress weakens a plant and makes it more susceptible to disease or insect attack. Environmental factors that affect plant growth include light, temperature, water, humidity, and nutrition. It's important to understand how these factors affect plant growth and development. With a basic understanding of these factors, you may be able to manipulate plants to meet your needs, whether for increased leaf, flower, or fruit production. By recognizing the roles of these factors, you'll also be better able to diagnose plant problems caused by environmental stress. Water and humidity *Most growing plants contain about 90 percent water. Water plays many roles in plants. It is:* A primary component in photosynthesis and respiration Responsible for turgor pressure in cells (Like the air in an inflated balloon, water is responsible for the fullness and firmness of plant tissue. Turgor is needed to maintain cell shape and ensure cell growth.) A solvent for minerals and carbohydrates moving through the plant Responsible for cooling leaves as it evaporates from leaf tissue during transpiration A regulator of stomatal opening and closing, thus controlling transpiration and, to some degree, photosynthesis The source of pressure to move roots through the soil The medium in which most biochemical reactions take place Relative humidity is the ratio of water vapor in the air to the amount of water the air could hold at the current temperature and pressure. Warm air can hold more water vapor than cold air. Relative humidity (RH) is expressed by the following equation: RH = water in air ÷ water air could hold (at constant temperature and pressure) The relative humidity is given as a percent. For example, if a pound of air at 75°F could hold 4 grams of water vapor, and there are only 3 grams of water in the air, then the relative humidity (RH) is: 3 ÷ 4 = 0.75 = 75% Water vapor moves from an area of high relative humidity to one of low relative humidity. The greater the difference in humidity, the faster water moves. This factor is important because the rate of water movement directly affects a plant's transpiration rate. The relative humidity in the air spaces between leaf cells approaches 100 percent. When a stoma opens, water vapor inside the leaf rushes out into the surrounding air (Figure 2), and a bubble of high humidity forms around the stoma. By saturating this small area of air, the bubble reduces the difference in relative humidity between the air spaces within the leaf and the air adjacent to the leaf. As a result, transpiration slows down. If the wind blows the humidity bubble away, however, transpiration increases. Thus, transpiration usually is at its peak on hot, dry, windy days. On the other hand, transpiration generally is quite slow when temperatures are cool, humidity is high, and there is no wind. Hot, dry conditions generally occur during the summer, which partially explains why plants wilt quickly in the summer. If a constant supply of water is not available to be absorbed by the roots and moved to the leaves, turgor pressure is lost and leaves go limp. Plant Nutrition Plant nutrition often is confused with fertilization. Plant nutrition refers to a plant's need for and use of basic chemical elements. Fertilization is the term used when these materials are added to the environment around a plant. A lot must happen before a chemical element in a fertilizer can be used by a plant. Plants need 17 elements for normal growth. Three of them--carbon, hydrogen, and oxygen--are found in air and water. The rest are found in the soil. Six soil elements are called macronutrients because they are used in relatively large amounts by plants. They are nitrogen, potassium, magnesium, calcium, phosphorus, and sulfur. Eight other soil elements are used in much smaller amounts and are called micronutrients or trace elements. They are iron, zinc, molybdenum, manganese, boron, copper, cobalt, and chlorine. They make up less than 1% of total but are none the less vital. Most of the nutrients a plant needs are dissolved in water and then absorbed by its roots. In fact, 98 percent are absorbed from the soil-water solution, and only about 2 percent are actually extracted from soil particles. Fertilizers Fertilizers are materials containing plant nutrients that are added to the environment around a plant. Generally, they are added to the water or soil, but some can be sprayed on leaves. This method is called foliar fertilization. It should be done carefully with a dilute solution because a high fertilizer concentration can injure leaf cells. The nutrient, however, does need to pass through the thin layer of wax (cutin) on the leaf surface. It is to be noted applying a immobile nutrient via foliar application it will remain immobile within the leaf it was absorbed through. Fertilizers are not plant food! Plants produce their own food from water, carbon dioxide, and solar energy through photosynthesis. This food (sugars and carbohydrates) is combined with plant nutrients to produce proteins, enzymes, vitamins, and other elements essential to growth. Nutrient absorption Anything that reduces or stops sugar production in leaves can lower nutrient absorption. Thus, if a plant is under stress because of low light or extreme temperatures, nutrient deficiency may develop. A plant's developmental stage or rate of growth also may affect the amount of nutrients absorbed. Many plants have a rest (dormant) period during part of the year. During this time, few nutrients are absorbed. Plants also may absorb different nutrients as flower buds begin to develop than they do during periods of rapid vegetative growth.

Week 3 = The Clown Show. I definitely transplanted too early into 14l pots. I also should have only started two seeds because this tiny tent is crowded now. I kinda freaked out when I saw what looked like nutrient deficiencies (calcium, potassium, I don't know) AND nutrient burn? I was so damn confused. I also realized not ph'ing was a dumb idea and quickly went out and bought a ph meter. I assumed since the tap water here is drinkable and not chlorinated, it's fine. But turns out it all comes from underground aquifers that are made of bedrock and every mineral that increases ph. I'm using lemon juice as my ph-down now and have figured that out pretty well. 1ml of it gets the water down to 6.0-6.3. Anyway, I spent the weekend in YouTube University trying to figure out what mistakes I made. More experienced growers, please feel free to comment with tips. Just don't be an asshole.

Lamp has changed. Veg stage is on, so 600W lamp is placed to be in the tent and the watering is 2 x 15 ml 2 x a day so 30 ml water per plant. Ventilation goes on at the same time like the lamp does. These girls grow so fast. They started smelling as well. Light schedule is 20 hours on and 4 hours off. Ventilation is the same hours when the lamp is on the ventilation is on as well. When lamp is off I leave the ventilation on 15 min more. Fertilization will start also on Monday, Wednesday, Friday the same amount of water with bat guano mix. I will be back after 2 weeks from my holiday.

Okay, so interesting week all around for both myself and this plant. First off, apologies for the limited pics this week. A lot of time was spent on another plant, but going forward, you should see an improvement. Second off, more apologies. This time, for the time-lapse video. It appears a bit jumpy during the first period as I was getting it properly configured, before bumping it out of position. I also realized I could zoom in with it. Now, on to Pink Lemonade. Its been an interesting start with this lass. Possibly I moved her over a hair early to her final home, or I somehow caused her some stress, but the week started off slow. But that all changed as the week went on, and she quickly produced her 2nd, and now 3rd nodes. From what I have seen, this plant, at least thus far, seems to stress easily, but once she comes back, she comes back with a vengeance. For those wondering what my intents with this young lady are, I plan to top her at least once, possibly twice, but no more than that. This grow is more about quality than quantity, and even though I should not lose quality by having more, I am also attempted to have this completed by a specific date. I would like to be harvesting this young one for beginning of sept. As per the seed company, she has a flower time of 8 - 8.5 weeks. Pretty tight time frame. We will find out how accurate it is. Pretty much 2 months exactly. That leaves me approximately 10 - 11 weeks to work with the plant, but as I have never grown this strain, I may move her to the bloom tent sooner. Also dependent on how fast she grows upwards as well. Until next week, keep on growing.

This girl did amazing, even after being blasted by a space heater. Strong secondary branching, big colas producer, nice trichomes coverage and good bud density.

Great week with this gals. BIG GAINS! Over 5 inches of upward growth in a week, and tons of flower. These are gonna be BIG girls! Introduced a light feeding of flora trio. 5ml of each per gallon and 5ml per gal of calimagic. Introduced some light defoliation this week as well. So far so good. I actually moved these girls from the hps to the brand new HLG Diablo 650r. Im able to fit all 10 plants in my grow under the one light, so I will save on heat and electric and give the Diablo a whirl. I expect some major swelling this coming week! Check out my other concurrent grow! Blue Dram matic!