Likes
Comments
Share
@Naujas
Follow
My house is full of sweet chocolate and fruit aroma:) her flowers are full of shiny trichomes :) the girl only bloomed for 57 days, but she is already ready, maybe her flowering sped up in my grow box, high temperature 33°, because of that under my arm my light was set to 85%. From the first days, the girl showed fast and healthy growth:) I made a timelapse video, but unfortunately due to problems with the SD memory card, it takes 3-4 days at the end of the video, besides, my tent is too small for that :D I also made bubble hash from sugar leaves myself :) I tried Zamnesia seeds for the first time - I hope that someday this seed bank will offer me its products to try again :) thank you all. you were together :) good luck with the growing.
Likes
1
Share
Likes
6
Share
Week 9 - flushing begins. Week 8 went well, the buds packed on weight and density, as the branches are sagging and twisting from the weight of the buds. This girl is incredibly sticky and very sweet and earthy smelling.
Processing
Likes
3
Share
@iamdiddy
Follow
great strain ,shee is happy all time..love this pheno and great genetiks of cours of barney farms , after couple days this gorilla gous oudoors ))🍀🍀✌️🧐🌄❤️💯🙌🏼
Likes
11
Share
@Chubbs
Follow
Amnesia Haze Auto Week 2 This week has been great. Both plants showed significant growth basically doubled in size. I upped the water to 32oz per feed daily of just water. The Temps have still been in the high 90's during the end of the light cycle but overall they seem to be handling it OK. All in all Happy Growing everyone.
Likes
11
Share
Seedlings stretched a bit had to put them under the light early. Popped 2 seeds initially with 2 freebies I got, unfortunately the freebies didn't germinate in a week so I tossed them and popped two more Dolatos and all four germinated with 100% success rate. Kept them on a 20/4 schedule watering them only once and sprayed the top soil with a mister every now and again. 👍🏿
Likes
24
Share
Halfway through flush run off at 150ppm. Temps dropped down to a range of 65-73. Things are getting purple but had to trim a bud of cause of mould. Humidity has stayed 50-70% due to my poor exhaust but overall looking dank !
Likes
28
Share
Likes
2
Share
Chopped the second Frostbanger after a week's flush. As you can see from the pics she is a beauty. Very good leaf to bud ratio will be easy to trim. Smell is strong. Next up will be the gorilla zkittles. Which is the biggest in the tent by far. But it's taking a while to ripen up. Then that's just leaves 1 frostbanger which I planted a couple weeks after the rest. The Frostbangers are just like photoperiods. Even for F3s they have been very stable. I can't wait to try the F8 banana purple punch 😳. This will be the last update unless I decide to add a week for the plant that's behind. Which also looks very good. If not I'll do a review and give the final weight in the next update. Very happy with this run. 🌱❄️💨
Likes
13
Share
They are completely different from the classic automatics, something between the automatics and the photo period, so I still don't know... I hope that they will strengthen a little, expand, increase the plants... and you can't expect a yield like some varieties like Gorilla cookies... But definitely... This smell so early, it's amazing, As the creators described it, it's like that. 😀🍀
Likes
5
Share
@Rizza78
Follow
Good week of growth. NeXT defoliation on the 11th. Will strip near 75% of the leaves. Can’t wait for the new growth! Going to start adding Bud Candy and Carboload on my next feedings.
Likes
25
Share
@KivzBudz
Follow
Die dritte Blütewoche hat am letzten Samstag begonnen. Schaut aus als hätten sie das Lollipopping ganz gut überstanden. Der Geruch wird langsam intensiver, aber sehr angenehm. Fotos werden Ende der Woche geupdatet.
Likes
8
Share
@nelgrow
Follow
La pianta sta crescendo piano piano...e sto pensando di cambiare la lampada CFL agro con una HPS vegetativa
Likes
14
Share
Likes
2
Share
Missed last week update but did some cutting girls have to live up to the mission 73 between the 5 plant....added one more which was a cutting from a seed plant harvested previous...didn't look like I did anything so cut dem a few day later 85 between the same plants... only cut the lower half of G4 n smaller inside branches( going to stop they dont hold up well)
Likes
9
Share
Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁
Likes
40
Share
@CAMOGROWN
Follow
So Xmas is over and I managed a harvest on the most mature at 15% amber. I smoked half the plant already so the yield ain't great, However the quality is there! The buds are sooo sparkly! Smell of OG kush and cheese but with a hint of cleaning product lol. The others are catching up! Currently Trich watching the next most mature.
Likes
21
Share
@rhodes68
Follow
Just missed 300 grams Easy harvest trimming was not that bad as leaves were large and stemmed mostly. Dry trim very easy Dry took a while as rain moved in and had to drag out the dehumidifiers She makes up for what little difficulties during grow with excellent results Highly recommend
Likes
8
Share
@Mazgoth
Follow
First week going smooth,just a little bit cold but still feeling good