The Grow Awards 2026 🏆
Likes
Comments
Share
The girls come back inside when the weather is uncooperative. Indoor temp is around 70 and humidity around 60-65%. Otherwise pretty much the same as prior weeks.
Likes
36
Share
@Regenwurm
Follow
In dieser Woche habe ich eine nicht gewünschte Verfärbung der Blätter festgestellt! Das grün ist blasser geworden und ein paar vereinzelte Blätter Sind von der Farbe leicht lila/ violett geworden. Ich bin bisher noch sehr zurückhaltend mit Dünger . Ich werde besonders in der kommenden Woche ein Auge auf pH Wert und Düngemenge legen da die Blüten stark am wachsen sind Tage der Keimungsphase = 7 Tage. Tage in Wachstum = 21 Tage Tage in der Blüte = 21 Tage Wachstum h Woche 3 Blüte = 8 cm 2 mal in dieser Woche mit Purolyt Mischung 1:25 besprüht Lichtstärke: 90 % PPFD: ca. 850 umol Lichtabstand: 40 cm Std Tag/Nacht: 18/12 Temperatur Tag: ca. 25 Grad RLF Tag: 58% Temperatur Nacht: 21 Grad RLF Nacht: ca. 60 % VPD Wert: ca. 1,0 PH Wert Wasser/Düngelösung: 6,2 EC Wert: nicht gemessen Ventilator Oszillation: Stufe 1 Befeuchter: an Entfeuchter: aus Zusätzlicher Entfeuchter: 0 Stk. außerhalb vom Zelt im Raum Bewässerung: 3* bewässert 1,5 l/Pflanze mit Dünger mit den o.g. Mengen 1 * pures Wasser mit 1 l/Pflanze Purolyt Besprühung: 2 mal Besprühung Fastplantspray : 1 mal Controlling: Grow Control Dünger: Greenbuzz Nutrients Licht: Pro Emit Vollspektrum Abluft: EC Carbon Active 750 m3 Danke an Zamnesia für die Seeds, den sonstigen Merch und natürlich das Vertrauen in die Kooperation https://www.zamnesia.com/de/10681-zamnesia-seeds-pineapple-express-f1-automatic.html Danke auch an Mia von GB: https://greenbuzznutrients.com/de/ Ihr bekommt 25 % Rabatt bei der Nutzung des Codes auf der GB Homepage https://greenbuzzliquids.com/de/shop/ Code: GD42025 (Mindestbestellwert 75€)
Likes
11
Share
On 7th day of flowering we removed lower little branches and made some lollipopping on the plants. Also we made some defoliation on gelatos cause they were very bushy but almost removed only biggest fan leaf. As plants were bigger enough we started adding granural mineral NPK 12-18-23 1 g/L and CalMag Xtra by advanced nutrients 1mL/L to the solution.
Likes
4
Share
0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH
Likes
18
Share
June 28 - They are doing great, We switched to the recommended amount of nutrients for flowering, Also 2 air stones I ordered have come in so now those are on 24/7 with the nutrient water in a 5 gallon bucket. June 29 - Still just growing away, I am still feeding roughly 3L per plant of nutrient water every 24-36hr depending on how dry they feel. June 30 - Totally forgot to take pictures/videos today. I gave them there daily watering and they are still just growing away. They are in flower now I believe! July 1 - Awesome to see this amount of progression. Tons of hairs and a decently even canopy. There is a small smell coming from in the room! July 2 - Again I forgot to take pictures, But as always they are still just growing away. so far so good! July 3 - Tons of growth and they are starting to become uneven. I don't have a ton of time so I think I will leave them for another week before doing some LST or HST. Tons of colas forming, lots of hairs and they are starting to have a heavier smell! So far so good! July 4 - Same thing as yesterday, still growing away, Ive turned the lights up to 100% now and I have removed the SF-1000 as I needed it for another project! (be sure to check out my other diary's which I will be uploading today!
Likes
Comments
Share
@hialex62
Follow
Day 29 Watered 400ml HulkBerry and removed some of the small lower branches with flowers. Day 31 Watered 500ml HulkBerry and 200ml WeddingCake and removed two big leaves wich were covering lower flowers. Day 34 watered 700ml WeddingCake and 400 HulkBerry Day 35 watered each 300ml
Likes
17
Share
Amazing week for my girl 😁🌱🌿
Likes
24
Share
COLOMBIAN JACK by KANNABIA Week #23 Overall Week #12 Flower This week is her last week she will be harvested next week she's really done a 👍 great job being outside. She looks great with her tricome covered almost round buds and she smells amazing!! Great genetics with this strain!! 👌 Stay Growing!! Kannabia.com COLOMBIAN JACK
Likes
5
Share
@Klausi_J
Follow
Very good. Decresing the humidity to 45 %
Likes
Comments
Share
Here we have both Oreo milkshake beans we popped running side by side topped and slowly allowing the canopy to even itself out we have tied them down and will have bused out by the next update
Likes
5
Share
Day 73 ~ Plant 1 is looking great and hopefully will be ready to harvest by the end of the week. Been checking the trichomes and while most are getting milky white, there are still a couple sites on the plant where I find clear trichomes. Plant 2 seems to be about a week or two behind the first plant...I will give plant 2 their final Nutes tmrw and then begin to flush. From reading about this strain it seems like it should take around 90 days from seed to harvest. So I would think plant 1 is running a little ahead of schedule and plant 2 is right on time. Day 75 ~ Both plants looking and smelling amazing! I was hoping to be harvesting the first plant by this weekend, but she is still growing and her trichomes are still not all milky and I haven't yet to find an amber one. So it might be another week or so before I can start drying her out.
Likes
4
Share
@dubby_m
Follow
Harvested to plant + wet trimmed… Now drying for the next Week, then curing… :) Will come back with the results!
Likes
4
Share
@Lazuli
Follow
Final week. I hope shes faded and completely ripe in 7 days i really have to cut it down.
Likes
112
Share
Alright Then REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 We just hit week 3 and all is well , have to admit she been a little bit of a let down ,still she keeps on going in just 21 days😃 ....... So this little sprout is tuff but I did screwed up and placed her in a bad spot and it got HEAT STRESSED last week😭 Fixed the problem and shes bounce back within a few days.......👍 Still very little vertical growth , but I'm working g on it 😏 Very little water given ,so far and rain water to be used entire growth Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉I WISH GD HAD DISCORD SERVER SO GROWMIES COULD HAVE A PLACE TO HELP AND TALK THINGS RELATED TO GROWING IN REAL TIME .....👈 👉SO I CREATED ONE ALL YOU NEED IS TO JOIN THE GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!
Likes
44
Share
@Saint
Follow
Welcome to the first flowering week Day 29 Growth is promising. Day 30 Started with a bad news. Main stem, center, got broken due to lst. Lower rope got released, and it made upper one to snap quickly... I noticed quite late sadly. I gotta admit, it's like tradition that main stem breaks whenever I grow 😂 I still tried to fix it back. I don't know if it's gonna work or not, but Jeffrey was through A LOT, and hopefully she will get through it aswell. I will update photos later today What's most important, hopefully it won't stunt my plant. Update. She seems okay. Day 31 Reviving center top is not working as I see. If it gets worse I will remove the tape and check it out, if no luck, it will be removed. Added 5 liters of fresh water, balanced out pH and added nutrients. Something is telling me I will see difference by tomorrow. Day 32 Added brick under the pot, so when I need to completely drain reservoir, it's gonna be on higher level, which will make the cycle easier. Did some defoliation, and took photos 2-3 hrs later. Center did not survive, so completely removed it. Duct taped the snapped open top. Day 33 All good. She's drinking almost 2 liters +- a day Day 35 So final day of this week. She is bushy. She is drinking like 2.5 liters a day. Quite appetite she got with those PPM-s 😀 I didn't defoliate much this week, but I will make a good one next week. I have no idea if this lights I am using gonna be enough or not. Let's see, maybe I can get her additional 240 watts? Let's see ❤️☘️
Likes
22
Share
@Smokwiri
Follow
Almost finished Amazon: http://url-9.cn/0y9i Amazon US: https://amzn.to/3e0P2bk Amazon CA: https://amzn.to/3bTnEJC Amazon discount Code: it10smokwiri XS1000 10% XSsmokwiri XS1500 8% it20smokwiri XS2000 5% it40smokwiri XS4000 5% ViparSpectra 8% DISCOUNT CODE on the viparspectra websites (.com/.eu) RUFFSELEKTAH
Likes
4
Share
@Pardy
Follow
I'm very happy with the outcome, outdoors this time around. It's my largest plant to date and it smokes great! I randomly gave this strain a try as it's packed with great genetics and it did not disappoint. It grew large considering the time it had to grow. It was constrained by a medium amount of sun light per day (4-6hrs) and it's pot size (40L) the roots were tightly packed I used bio fertilizers Bio buzz grow Peruvian seabird guano and organic potassium for veg Biobizz bloom top max compost teas in flower It smokes and taste great already. I chopped Oct 1st Thanks for tuning in!