Likes
Comments
Share
She‘s doing okay. Buds are building pretty nicely. Top leaves are yellowing just a bit.
Likes
10
Share
Week five of flowering now she’s starting to really have a smell now the buds are really getting nice and sticky covered in trichomes.gonna start reducing feed next week gradually .had a small accident this week broke one of her stems but she’ll be fine.
Likes
38
Share
@Salokin
Follow
GMO × Triangle Mints BX – Week 15 Veg | Approaching the Solstice She’s turning into a proper outdoor plant. 130cm and the canopy has filled out into a dense, even structure with tops stacked all the way across — the LST work from earlier in the season is clearly written into how she looks right now. Health is solid, colour is deep green throughout, no concerns. Sitting at 17 hours of daylight right now, right up against the solstice peak. She’s making the most of every hour — water consumption holding at 5L per feed, and she’s clearly using all of it. Nutrients unchanged: CANNA Aqua Vega 4ml/l, CalMag Agent 1.1ml/l, Aptus Regulator 0.1ml/l. pH 6.2, EC 1.5 mS/cm. The coming week is looking like the best of the season — mostly dry, temperatures pushing up to 30°C on Tuesday, a touch of rain expected Thursday night, then back to warm and settled. Winds light throughout. If she keeps this pace through the solstice and into early July she’s going to be a serious plant by the time she flips. Updates every Sunday. Stay tuned. 🌿
Likes
16
Share
@Lazuli
Follow
So the smallest of the 3 got harvested, Now the yellow plant goes another week While the final plant needs 2 more weeks maybe 3weeks
Likes
31
Share
@Tackle123
Follow
This is such a long week ! It has been raining heavily for 5 days (like non stop raining ) which causes the humidity in the room to rise and the temp dropped fast. Not so sure if the red stem was caused by the temp drop or not. The humidity level rose to 85% which worries me very much . Even the small dehumidifier doesn’t seem to help. This could potentially causes me more problems such as bus rotting . Let’s hope after the rain the RH is going back to normal. For this week really nothing much but i will have to increase the PPM level of the medium cuz i can see a lot of bud sites forming up but struggling to get dense LOL 😤😤 “BUT” i can’t adjust the PPM now because i broke my TDS meter by dropping it into the water . Silly me ! I want to give a piece of advice for you guys out there , NEVER buy a non waterproof TDS meter .Just think about it , the equipment is a water measurement tool but it is not waterproof . Trust me , just buy the waterproof ones so you don’t have to reinvest again 🚫🚫 **I am in week 4 of flowering is it weird that i can’t see any trichomes yet?**
Likes
31
Share
Esta semana fue bastante estresante para la planta desde el transplante hasta la poda, ya que se han presentado algunas complicaciones,(se rompio una de las ramas principales al intentar doblarla, que por suerte se pudo solucionar,a todo esto hay que sumarle el transplante a su maceta definitiva de 35 litros. Ahora dejaremos que descanse un par de días mas y en breve estaremos comenzando la etapa de la floracion.
Likes
6
Share
@Chubbs
Follow
What up fam, weekly update on these beautiful ladies. They've definitely gone into flower now, the pistols are everywhere, can't wait to start seeing the flower sites form. I can say they have bounced back from my ph mess up. All I all Happy Growing
Processing
Likes
10
Share
03/08/20 cambie el fotoperiodo a 12 horas. Empieza lo bueno
Likes
2
Share
Letzte Woche in der Veggi... Ab nächste Woche Umstellung auf 12/12🌑🌞 Die Glitterbomb hat sich mittlerweile wieder gefangen und schiebt gut nach🍀
Likes
3
Share
@madcash
Follow
Last days, getting fat and frosty. Switching to 24 hr for the final few days before chop. Last water was on day 85. I feel like I could actually wait another week or 2 but want to have some Xmas gift for friends so that clock is ticking. Easily 10% amber trichs at the moment and will likely get more with full light and no water for the next couple of days. Harvest coming right up!
Likes
33
Share
@BudXs
Follow
Make this week count. Hug your family and be the best you can be
Likes
93
Share
@LGreen
Follow
🌱 Wieder mal einen schönen Sonntag & zweiten Advent für die, die es betrifft 😊 🌿 Wochenupdate Die Woche war wieder bisschen was los… leider =D Ich versuche wieder alles so transparent wie möglich zu machen 😊 Zu Beginn habe ich meine Lösung wie gewohnt manuell mit hochwertigen Apera-Messinstrumenten kontrolliert angemischt und behandelt. Das lief auch immer perfekt, bis es leicht überhand genommen hat 😅 Ich habe locker 7-mal am Tag gemessen und dementsprechend anschließend gereinigt… Nach ein wenig Überlegen habe ich mich dann schließlich doch für einen Bluelab Guardian entschieden. Anfangs wollte ich nicht so viel in reinen Komfort investieren, aber mir persönlich wurde es einfach zu viel, weil ich zu oft wissen möchte, was los ist =D Letzte Woche hatte ich ja bereits erwähnt, dass ich den Stretch-Peak anhand der EC- und pH-Kurven bestimmen konnte. Das lief schon alles über den Bluelab. Da ich wirklich gerne datenbasierte Entscheidungen treffe, habe ich ab diesem Moment weiter fleißig runtertrainiert und die Werte beobachtet um den richtigen Zeitpunkt zum sortieren zu erwischen . Der Trend war dann aber erst mal, dass sie einfach wie verrückt weiterziehen 😄 Am 4. Tag bei diesem Messverhalten wäre es fast passiert… Der Uptake hat über eine Dunkelphase so dermaßen zugenommen, dass ich es mir nicht mehr erklären konnte (Peak-Messung × 2,5). Fakt war aber: Das Reservoir war von den Werten her wirklich in einen kritischen Bereich gerutscht und ich wollte das ändern. Warum das so war, dachte ich mir: kann ich auch später klären… schließlich haben die Ladys Hunger =D Also habe ich wie immer 30 L Top-Up berechnet, gemischt und auf etwa 4,30 mS/cm eingestellt, damit ich die niedrigen RESS-Werte wieder nach oben bekomme. Zum Glück habe ich auch meine Momente, man mag’s nicht glauben 😄 Ich habe random beim Abpumpen mal den Drain gemessen, weil es mir keine Ruhe gelassen hat – und siehe da: 1,9 mS/cm. Die Sonde hatte sich über die Wochen ordentlich in einen Wurzelballen geschoben und dadurch zwar konstante Werte geliefert, aber eben in einer Wurzel-Biozone und nicht im freien Draftwasser. Das klingt erst mal nicht dramatisch , aber wenn mir das nicht aufgefallen wäre, hätten die Damen rund 24 h in einem hochtoxischen Bereich gestanden… Das wären sicher ein Ordentlicher stepback gewesen... Und natürlich passiert das Ganze in einer Phase, in der ich ihnen so wenig Stress wie möglich machen möchte 😄 Ich habe jetzt aus grobem Filterschwamm kleine „Hüllen“ gebaut, die aktuell ihren Dienst tun und die Wurzeln fernhalten. Drain-Messen ist ab jetzt auf jeden Fall SOP 😄 Da der Guardian erst während des Runs eingezogen ist, konnte ich ihn leider nicht ordentlich verbauen.. 🌿 Pflanzenstatus & Training Zur Sicherheit gehe ich wieder Back to Basics und trainiere so lange weiter, bis der Rebound-Stretch sichtbar nachlässt 😊 Das sollte jetzt die Tage geschehen. Den nächsten Run gestalte ich hier definitiv anders 😄 Ich brauch doch meine Werte fürs Timing… Anschließend nur noch die Meshes bestücken, langsam am Klima schrauben – und wachsen lassen 😊 ⚙️ System Bis auf die Panne mit der Sonde läuft das System nach wie vor perfekt. Am Vorgehen mit berechneten, gezielten Lösungen hat sich nichts geändert 😊 800 PPFD 1,0 kPa VPD 700–800 ppm CO₂ im Durchschnitt 💚 Special Mention Da geht auf jeden Fall was 😄 Ich glaube, an dem Punkt kann man echt davon sprechen, dass sie durch ist. Sie ist nicht ganz so gut entwickelt wie ihre Schwestern – aber trotzdem eine sehr vitale Pflanze, die sich echt zurückgekämpft hat 😄💚 Danke fürs Lesen und eine schöne Woche euch 😊!
Likes
18
Share
@Bncgrower
Follow
Everything as expected, good development so far, well resined flowers and a slight sweet smell. Looking forward to the next few weeks... Good growing everyone 🏻💪🏻
Likes
2
Share
So far nothing to complain about buds sites are putting on some size....clone piece is holding up pretty good....hoping she get some roots this upcoming week...never really clone before