Day 64. Girls are going ok, but : I had pH issues, recalibrated meter. Have small thrips infestation, so bought 25000 Amblyseius swirskii, natural predators. Should be done deal !!! One Cookie is going violet !!! Very nice, hard to reach to make clear photos, I will try better next week, she is really really nice!!! Strawberry is going insane nuts, she crowned herself new QUEEN. Her top became triple top ;))) Beast not a strain !!!! Happy growing !!!

Shooting powder added to the tank and buds still swelling nicely. Looks like a great yield for under a weeks veg.

I’m going to leave the seedlings in the small brown pots until their 1st node and then I’ll transfer them into bigger plastic 3.5gal pots with 80/20 soil to perlite potting mix. One Dosidos is looking a bit behind and the one with the weird leaves ended up catching up to the Northern Lights, maybe even growing faster than it. All Dosidos’ ended up dying but one and I’m sure it’s on the way out. Northern Lights has had no issues and growing perfect.

The purplematic is foxtailing rly strong :/ but i do not mind that too much, i am much more sad about the actual size of the plants. Got 2 auto hulkberry rdy for next summer. The hulkberry is stacking up in a way more sadisfying way harvested at day 4 of the week

Tag 22: getoppt bei 4 Nodien. Tag 24: Umgetopft in einen 15L Topf. Tag 25: Ich fange an die Zweige runterzubiegen.

Final 2 weeks the leaves start to fade on their own, today i stared feeding ripen The buds look weird but frosty The smell is insane

Hello colleagues! As for an autoflower, the cycle did not take much time and brought good results for me. Thanks to GanjaFarmerSeeds for the opportunity to test a new strain, also thanks to everyone who came and commented on this diary 🙏 See you soon😀👍

So far so good. Today, on 23/8, I fed her with Biobizz Grow for the first time. I think she's been growing at a decent pace even without any fertilizers, so, in order to not risk nute burn, I used a smaller dose than what BioBizz recommends. 27/8 The newer leaves seem as if they are curling up a little bit. Might be because the light is very low. So, I have raised the light a little bit. Let's see how she responds. put on new lights that are more suitable for the veg phase. ------------------- 28/8 So I posted a question regarding a Spot that appeared on one of the leaves. By mistake I selected an answer that might not be adequate to my situation. GrowDiaries does not let you change the selected answer so I am copy-pasting the correct answer here. Bostongirl17 was right because I did spray some Neem Oil on the plant because there were mosquitoes in my room and i even saw a little spider. So it could be that a bigger droplet fell on the leaf and caused that blemish/spot. Bostongirl17: If it’s growing with the leaf- and not at a faster rate. It’s probably just a blemish. Is it possible you splashed them with your nutrients during feeding? 🌱 ----------------------

Its pretty well upto dis point , just having a pH imbalance but not much , its just kinda slows d growth a lil bit and lookin good by d day cheers

Start of week 5 got pistols on all the branches.I keep opening up the plant to light with my skewers and twine.

Update of week 2

3.23.25 Fastbuds LSD-25 auto #1 Germination 1st week Only watering with spring water. Going to be using foop nutrients with Humboldts secret cal/ mag and nectar for the gods ph up and down! Here we go!

Harvest Report – Cutting The cutting has now reached harvest time, and the final impressions are very positive. Compared to Phenotype #1, the aroma of the cutting is noticeably sweeter—a more pronounced fruity profile with less of the earthiness or pine noted in other phenotypes. The buds are dense and sticky, reflecting the successful flowering process despite lighter nutrient feeding. Key Observations: Aroma: Sweet and fruity, an improvement or variation on #1. Bud Quality: Dense structure and well-formed trichomes indicate good resin production. Nutrient Management: The lighter feeding schedule led to some yellowing leaves early, but the plant still delivered a satisfying yield. Performance: Overall, the cutting performed as expected, showing consistent traits and no issues with hermaphroditism despite being feminized. This confirms that previous issues were likely due to the genetics of other plants rather than environmental factors.

Defoliated again the leaves which were growing over Bud sites The streching phase has begun. I am corious how tall the plant will go.

June 16th - 7 days after sowing in the 11-liter final pot

Rise and shine

Hi guys sorry for a late post this week. So started flushing all the plants now and they all.smell.amazing and getting some nice colours coming thru. Really frosty buds on these autos and really impressed so far.

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.