Likes
4
Share
the wind is strong and sun too, nothing seems to matter and grows healthy and fast.
Likes
6
Share
Er blevet flyttet uden for, ( for ca 6dage siden) jeg har simpelthen haft så travlt med at få plantet ud , så der gik lige en dag for meget! DET VILLE IKKE SKE IGEN 🤞🙏🏼☮️😇🙂glæder mig virkelig til hun virkelig for fat i solen og varmen stiger bare ti grader:-)💚💚🌸😊👌☮️🙏🏼😇
Likes
41
Share
@Kmikaz420
Follow
Désolé mais pendant plusieurs jour je n arrivé plus à charger mon journal ? Bref dernière arrosage avec nutriments ;) on y arrive tous doucement . Autrement j ai eu un petit départ de bud rot sur la melon gum (rien de méchant 2 calices coincé entre 3 immense têtes ;) j ai donc enlever les 2 têtes et désinfecté aux mieux (les 2 têtes n avez rien j ai donc pu les goûter hier soir et j doit dire l effet est vraiment sympa ;)
Likes
3
Share
@deseed_uy
Follow
Semana 4/5 aprox, llenita de plagas y de resina😮‍💨
Likes
12
Share
This is a giant autoflower that reaches 150cm and produces massive yields of up to 600gr/m2, a modern Cali strain that offers what a top-quality Indica-dominant hybrid should; nugs capped in resin with the density you would expect from Indica-dominant strains and that bag appeal that will surprise even the most experienced growers. Expect beautiful purple and magenta hues that come along with a sweet almost pastry-like taste and, thanks to the 24% THC, a very pleasant and potent effect that surprisingly starts as a motivating high and in no time relaxes you completely, taking a bit of the energetic edge off. Tech Specs Taste Blueberry Muffins, Cherry, Spicy THC Up to 24% CBD < 1% Size XXL Height 90 – 150 cm Flowering 9 weeks Genes Sativa 15%/Indica 85% --------------------------------------------------------------------------------------------------------------- Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
2
Share
She’s still building I think and her trichomes are currently mostly white (~75%) with 25% clear and still 0% amber. When do you think I should start fading?
Likes
2
Share
🍮 Chem Brûlée – Pheno A Week 9 | Small? Maybe. Beautiful? Absolutely. ❄️🔥 Welcome back to another week of the 8×8 Adventure! 💚🌱 And this week, Chem Brûlée Pheno A has something very simple to say: You don't have to be the biggest plant in the room to be one of the most beautiful. At approximately 126 cm, she certainly isn't the smallest plant in the garden. But she's also not trying to become the biggest. She's simply doing her thing. Growing. Flowering. Stacking. And increasingly covering herself in frost. And honestly... she's beautiful. 🍮❄️ 🌱 A Quick Look Back Chem Brûlée Pheno A continues to be one of those plants that has developed her own identity throughout this adventure. From the beginning, we've watched her establish a strong structure and gradually transition from producing plant architecture to putting more and more energy into flowers. Last week, we gave her a little selective cleanup. Not because the calendar told us to. Not because we wanted to make her look "perfect." But because some leaves had simply reached the end of their useful contribution, while opening a little space around the canopy made sense. And that's the approach we're continuing with. Read the plant. Respond to the plant. Then let her grow. This week, the result is becoming increasingly obvious. The plant is settling into flower. And the flowers are becoming the stars of the show. 🌸 The Flowers Are Taking Over This is where Chem Brûlée really starts to shine. The developing flowers are becoming much more pronounced now, with increasingly defined structures throughout the plant. Those beautiful white pistils are still reaching out from the flowers, but something else is becoming much harder to miss. The frost. ❄️❄️❄️ The resin coverage is building. Looking at the close-up photographs, you can see that the sugar leaves and developing flowers are becoming increasingly coated. We're still not at the finished product, of course. There is plenty of flowering time ahead. But we're definitely entering that stage where you can start seeing the plant's character developing through the resin. And that's one of my favourite transitions in the entire grow. Early flower is exciting because the flowers appear. Mid flower becomes exciting because suddenly you start seeing what those flowers might become. Chem Brûlée is entering that territory now. ❄️ Frost Is Coming If I had to choose one word for this week's photographic update... Frost. 😂❄️ The resin production is becoming increasingly visible, and the close-ups really capture it. Those developing flowers are surrounded by sparkling trichome-covered surfaces, while the pistils continue creating that beautiful contrast against the green foliage. It's still early enough that the plant has plenty of work to do. But we're getting the first real glimpse of what makes this phenotype special. And I have to admit... I could probably spend far too much time standing there with the macro lens looking at her. One photograph becomes ten. Ten becomes twenty. And suddenly I've been standing in the jungle taking pictures of one flower for half an hour. 😂📸🌿 But that's part of the fun. 🌿 She Doesn't Need to Be the Biggest One thing I really want to emphasize with Chem Brûlée Pheno A is that I'm not judging her against the tallest plants in the room. Yes, there are girls in the 8×8 Adventure who are taller. Some have stretched more. Some occupy more physical space. But that's not the only measurement of a successful plant. Chem Brûlée has created her own structure. She's filling the space she's been given. She's producing flowering sites throughout that structure. And now those flowers are developing beautifully. That's what matters. A phenotype doesn't have to win the height competition. She just needs to show us what she can do. And she's doing exactly that. 🔬 Her Structure Is Becoming More Interesting The further we move into flowering, the easier it becomes to understand the architecture she created earlier in the run. The branches are now carrying developing flowers rather than simply supporting vegetative growth. The spacing between the flowering sites gives us a good view of the individual structures, while the remaining foliage continues supporting the plant through this important stage. And this is where the earlier selective training and cleaning start making more sense. We're no longer trying to create the plant. The plant has already created herself. Now we're simply supporting the structure she chose. That's something I really enjoy about this run. The grower starts with an idea. The plant then says: "That's nice... but here's what I'm actually going to do." 😂 And our job is to adapt. ✂️ Selective Cleaning – Keep It Sensible The selective defoliation from last week has left the plant with a little more breathing room without compromising the healthy canopy. And we're going to continue treating defoliation as a tool rather than a scheduled event. If a leaf is blocking an important flowering site... we can remove it. If a leaf is damaged or no longer contributing... we can remove it. If a part of the canopy is becoming unnecessarily crowded... we can open it. But if a healthy leaf is doing exactly what we want it to do? Let her work. 🌿 There's no reason to remove healthy foliage simply because we're in flower. The goal is balance. Enough foliage to support the plant. Enough space for light and airflow. And enough openness to avoid creating unnecessary dense pockets around the developing flowers. It's a living canopy, not a haircut appointment. 😂✂️ 💨 Airflow & Flower Development As the flowers continue increasing in size and density, airflow becomes increasingly important. The room is carrying twelve different plants, and every phenotype creates its own microclimate. That's another reason I like keeping an eye on canopy density rather than treating every plant identically. Chem Brûlée has plenty of foliage, but we're keeping an eye on the areas where leaves and flowers begin getting too crowded. A little extra space can help air move through the plant. And as the flowers continue developing, that's something I definitely want. We're not trying to eliminate every gram of humidity from the room. We're simply trying to avoid unnecessary stagnant pockets around increasingly dense flowers. Healthy airflow is part of the overall strategy. 💡 Light – Give the Flowers What They Need The lighting setup continues providing the room with strong overhead illumination, while the additional inner and under-canopy lighting helps support areas that naturally receive less light. And Chem Brûlée's structure gives us plenty of interesting angles to work with. The developing flowers aren't all sitting at exactly the same height. They're distributed throughout the plant. That means the combination of canopy structure and supplemental lighting becomes particularly useful. The objective isn't simply: "More light." It's: "Useful light reaching as much of the productive plant as reasonably possible." And that's an important distinction. More isn't automatically better. We're looking for balance between light intensity, temperature, CO₂, nutrition and plant health. Right now, she appears very comfortable with the environment she's receiving. ⚗️ Feeding – No Need to Reinvent Anything The feeding strategy remains consistent with last week. We're continuing with: 🌱 Plagron Terra Bloom – 2.2 ml/L 🌱 Plagron Green Sensation – 1 ml/L 🌱 Plagron Power Buds – 1 ml/L 🌱 Plagron Sugar Royal – 1 ml/L With Lemon Kick / pH Plus used as required to maintain the target pH. Current solution: ⚗️ pH – approximately 6.0 ⚡ EC – approximately 2.0 mS/cm And once again, I'm not interested in changing something just because another week has passed. She's growing. She's flowering. She's producing resin. She's maintaining beautiful foliage. Those are all good reasons to stay consistent. The plants don't receive extra points for having their nutrient recipe changed every seven days. Sometimes the best adjustment is: no adjustment. 🌡️ Current Environment The room continues running with a remarkably stable flowering environment: 🌡️ Day temperature – 29°C 🌙 Night temperature – 25°C 💧 Relative humidity – 60% 🥥 Substrate temperature – 26°C 💦 Solution temperature – 25°C ⚗️ pH – ~6.0 ⚡ EC – ~2.0 mS/cm 💨 CO₂ – 639 ppm 💡 Light schedule – 12/12 ? Pot size – 15 L 💧 Watering – approximately 1.3 L/plant/24h The environment remains stable, and that stability is particularly valuable now. We're moving further into flower. The flowers are becoming denser. Resin production is increasing. And consistency gives the plants the opportunity to focus on development rather than constantly adapting to environmental changes. 🌙 Day vs Night One thing I continue paying attention to is the relationship between the daytime and nighttime conditions. We're running around 29°C during the day and 25°C at night, giving us a noticeable but controlled temperature difference. That daily rhythm is part of the overall environment rather than something we're looking at in isolation. Temperature, humidity, light intensity, CO₂ and plant transpiration all interact. And that's why I prefer looking at the room as a system. You can change one number and accidentally change several other things along with it. For now, the system is behaving nicely. So once again... don't fix what isn't broken. 📸 Behind the Lens This week's photographs really made me appreciate her. The wider photographs show the plant's overall structure. But the close-ups? That's where she really starts showing off. The developing flowers are becoming increasingly complex. The pistils are still beautiful and prominent. And the resin is beginning to give the flowers that characteristic frosted appearance. There are moments where I look through the camera and think: "Okay... now I see you." 😂❄️ That's what makes documenting a grow so rewarding. The plant changes gradually enough that when you see her every day, you don't always notice how much has happened. Then you compare photographs from previous weeks... and suddenly the difference is obvious. 🌿 My Little Jungle And honestly, I'm having an absolute blast with this run. There are twelve plants in there. Twelve different personalities. Twelve different structures. And now twelve different flowering stories developing in front of me. I walk into that room and sometimes feel like I'm Tarzan wandering around his little jungle. 😂🌿 Checking flowers. Looking underneath leaves. Watching the canopy. Taking photographs. Looking for anything unusual. And most importantly... learning. That's what this entire adventure has become for me. Every plant teaches something. Every phenotype gives us another comparison. Every week gives us another opportunity to adapt. And Chem Brûlée Pheno A is teaching us that beauty doesn't need to come from size. Sometimes it's sitting right there in the flowers. Covered in frost. Waiting for you to notice. 🔮 Looking Ahead The next week should be another interesting step forward. I'm expecting: ❄️ Increasing resin production 🌸 Continued flower swelling ? Further pistil development 🌿 Healthy foliage supporting the flowers 📈 More definition and density throughout the developing colas And what am I planning to do? Honestly... Not much. 😂 I'll continue observing. I'll keep the environment stable. I'll maintain the current feeding strategy while watching her response. I'll clean selectively if the plant gives me a reason to. And I'll keep photographing her. Because at this stage, patience is becoming increasingly important. We've built the structure. We've established the flowers. Now we let Chem Brûlée put the work into them. 🍮 Small? No. Her Own Kind of Beautiful. That's probably the biggest message I take from this week. Chem Brûlée Pheno A may not be the biggest girl in the room. But stand in front of her. Look closely. Look at the flowers. Look at the structure. Look at the pistils. Look at that frost beginning to build. She's doing her thing. And she's doing it beautifully. There is no reason for her to compete with another phenotype. She doesn't need to be taller. She doesn't need to be wider. She doesn't need to stretch another twenty centimetres just so we can call her impressive. She's already impressive. Because she's becoming herself. And that's exactly what this 8×8 Adventure is all about. 💚 One More Week, One More Lesson Every week I become more convinced that growing is less about controlling plants and more about learning how to understand them. We create the environment. We provide the light. We provide the nutrition. We provide water. We make adjustments when necessary. But ultimately... the plant decides what she's going to become. Chem Brûlée Pheno A has made her decision. She's going to be elegant. She's going to be beautiful. She's going to build flowers. And apparently... she's going to get very, very frosty. ❄️🍮🔥 And I am absolutely here for it. 🙏 Thank You As always, thank you so much to everyone following the 8×8 Adventure. 💚 Every week, this project becomes another little lesson in genetics, observation and patience. A huge thank you to GrowDiaries for giving us the space to document this journey and share it with the growing community. Thank you to Zamnesia for the Chem Brûlée genetics and for giving us the opportunity to discover what these phenotypes can become. Thank you to Plagron for the growing media and nutrition supporting the plants throughout this adventure. Thank you to Future of Grow LED for providing the lighting powering this jungle. Thank you to LumiFlora for helping illuminate those lower and inner flowering areas. And thank you to TrolMaster for helping us keep an eye on the environment behind the scenes. And finally... thank you to everyone following along. Whether you're here every week, dropping comments, asking questions, taking inspiration, or simply enjoying the photographs... thank you. 💚 This adventure has become so much more than twelve plants growing in one room. It's twelve different stories. And Chem Brûlée Pheno A has another beautiful chapter for us this week. She may not be the biggest. She doesn't need to be. She's beautiful. She's building frost. She's developing her flowers. She's doing exactly what she needs to do. So let's stop comparing her to everyone else... and simply let her shine. Because she deserves it. 🍮❄️🌸🔥 Growers Love, my friends. 💚🌱 See you next week in the jungle. 🌿📸
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 30/11/2019 - Struggling with high humidity, change led strip color from red,green,blue to red and green. 1/12/2019 - Checked and adjusted the light distance. 2/12/2019 - Pot feels light and dry, gave her 1,5l PH 6.3 with a 1/4 of recommended Biobizz nuts, notice almost no run off. 3/12/2019 - Finally her first pistil appeared on the main stem I was starting to get worried.
Likes
17
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Habe sie heute geerntet. Wir sehen uns in 3 Wochen mit dem Erntebericht. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
15
Share
Haven't updated my grow diary for a little more than two weeks due to a severe back flare up. Yup, bad back strain, which has made it hard to sit, lay, stand for any duration of time. Suffice to say, much has happened since last update. Bucket change and upping nutrient (ppm) levels as I transitioned her to flower. And in that time, she received one defoliation in veg and a recent (and last) defoliation in flower. At this point, I just need to maintain healthy roots, consistent environment, and proper water levels with feedings. She's due another bucket change soon as ppm levels dropping and ph is adjusting upwards every reading. This is good sign from my understanding as a first time DWC grower. As far as feeding, lowered grow big (veg) and upped both tiger bloom and beastie blooms along with a splash of big bloom and cal/mag. Topping off buckets with about 1100+ ppm, which helps maintain ph in bucket at roughly 700-800 ppm. But it's getting harder to maintain those levels in flower, so that's why I believe a bucket change is in order. Here are photos spanning the entire 2-3 week period since last update.
Processing
Likes
26
Share
I add twoo spoon of molasses to 10l of water. Buds are sticky and frosty and smell great..
Likes
39
Share
@Krisis
Follow
08/21/24. Going into week 8 flower Day 57 out of stated 64. So one week left exactly. I’m not sure on that. She’s still drinking at the same rate as usual, and there’s still quite a few white hairs. I’ll be looking at her trichomes today anyway, just to see where we’re at. Either way she’s getting just water from here on out. She’s dark af and has some nutrient burn anyway, so I’m sure she’ll be fine. She’s fattened quite a bit more than I expected. Seemed like her buds would be kinda long and skinnier. No complaints here though. She’s getting pretty damn frosty and sticky too. She has a kinda piney sweetish smell. Start the count down ⏰ See yuh ✌️
Likes
5
Share
A princípio deixaria mais uma semana, mas como verifiquei um botão com fungos , resolvi antecipar , afinal os tricomas ja estavam bem leitosos. Agora é aguardar secar .Secagem em andamento na cesta de secagem.
Likes
20
Share
@Chubbs
Follow
420Fastbuds FBT2304 Week 9 Hello everyone from far and wide on this beautiful planet. Weekly update for these twins. Both seem to be in mid flower on cruise control with no big issues present. I'll most likely stop feeding nutes this week and just go with ph'd water after that till harvest. All the colas on both are super chunky so it'll be exciting to see how the next week or two turn out. All in all Happy Growing
Likes
22
Share
HELLO LADS WELCOME BACK TO MRS PEAKY'S GARDENS THESE BEAUTIFUL GEMSTONE CONTINUE TO GET FAT LIKE FAT COWS EVERYTHING SEEMS TO BE GOING RIGHT...
Likes
11
Share
@Glen1818
Follow
Led runs on 74watt, grow very fast Removed some large leaf, On day 28 removed again larger leafes , think i will send them in the flower in a few days
Likes
5
Share
12.9 4th veg week done and girls are now in new 11L pots and I also topped them yesterday (12.9) All healthy 👌 They got used to new homes almost instant. I decided to top all plants now when pretty small and I try to make 6-8 tops to each... hoping they fit 😂 All 3 Strawberry Lemonades are very similiar.. same height and branching about the same also, nice 😋 I'm gonna insert netting there and use some stakes also to part space for plants.. Ok that's it happy growing everyone!! 👽🙏
Likes
12
Share
In a week, I give compost tea, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@
Likes
5
Share
@Krissci
Follow
Not much training this week...leave it to bloom and do its thing. Maybe light defoliation towards the end of the week