Aloha Freunde der Sonne 😊 Die Tage vergehen und die Damen wachsen prächtig vor sich hin. Immer noch die Höhe der Mädels angleichen auch wenn mal was abbricht 😅 Viel Spaß

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent

Week 16 (Harvest) 30-1 First day of darkness. Temperature: 27.9 degrees (lights on) 18.8 degrees (lights off) Humidity: 65% (highest) 48% (lowest) 31-1 Second day of darkness. Temperature: 24.5 degrees (lights on) 19.5 degrees (lights off) Humidity: 65% (highest) 50% (lowest) 1-2 Drying day 1 The Saparot is ready to be harvested! Before chopping her down, i took a lot of pictures. I was able to remove most of the soil to see the rootball. I hang plant as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. Cant find the temps for 6-2 to 2-13. I do have a video when she was at the half of the dry process. 14-2 Trim day, yay! She was easy to trim, the buds are nice and dense, and there was not a too high bud/leaf ratio! She dried for 14 days. End results: Dried buds: 81 Grams. Dried Trim: 18.5 Grams. I am really surprised how good these genetics are! If you like CBD, i really suggest trying JYM Seeds out! The Saparot smells very fruity almost like a fruity coctail. The buds are super dense, and very bag appealing. After some months of curing the sweet fruity smell changed to a more sour smell, but still smells amazing! To be honest, i cured her a bit poorly, burped too less, and because the buds are so compact she holds moisture better then normal, so she tastes harsh, but thats on me. I have a pack of JYM's Sour Fruit aswell, so i will for sure try it out again! And my hope is already very high :D Thanks for following my diary, and feel free to check my others out aswell! See you at the next one!

~ FASTBUDS TESTER #2204 ~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This tester strain is one of six tester strains that FastBuds has graciously provided me with and I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! One drawback of 'testers' is I have little to no information on it other than its number and that it's an autoflower... 🤪 But, it's ALWAYS a blast growing them for me because not knowing a lot allows me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seeds were lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which they were transferred to moist paper towels laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉ where they stayed until their tap roots emerged. ~Planted into Jiffy Peat Pellets that were hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerge from the Jiffy Pellet they're transferred to their fabric pots. ~Grown 100% organic in a 4g Gronest fabric pot and a 3g fabric pot by Wraxly filled with Mother Earth 70/30 Coco/Perlite medium and initially amended with Dr. Earth 4-4-4 / Earthworm Castings / Dr. Earth Flower Girl 3-9-4 and Coast of Maine Stonington Blend Organic Plant Food 5-2-4. ~19/5 light cycle for the entire run with supplemental UVA added during flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~Top dressing every 3-4 weeks with slow release dry amendments and Earthworm castings. ~Straight water ph'd @ 6.2-6.8 when needed and bi-weekly Compost Tea's. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 1/19- Here we go into Week Three of flower and these testers are finally in flower mode!🧐👍 Both testers are in flower and are ready to eat! Today I gave both girls a top dressing with Down To Earth 4-8-4 Flower Mix at a ratio of 2tbsp/g and Coast of Maine's Stonington Blend 5-2-4 Organic Plant Food at a ratio of 1tbsp/g which I simplified by using 1/3 cup of the 4-8-4 and 1/4 cup of the 5-2-4 in the 4g pot and 3/8 cup of 4-8-4 and 1/8 cup of the 5-2-4 in the 3g pot. After working the amendments into the medium, I watered it in with 1g of straight de-chlorinated water ph'd to 6.6 @ 74℉. It will take a week for the microbes to begin breaking it down and will last for 3 weeks or so. I'll monitor them and decide on whether I'll give them another top dress or let them ride. I've also increased the power to the HLG 650R's the the Trolmaster Hydro X Controller to 75% which has them pulling 990w at the wall and have them hung 32" above canopy. I also starting adding in 4 hours of UVA during the middle of the light cycle for the remainder of flower. I've been monitoring their leaf temperatures and they're running 71-73℉ which is perfect! I have the AutoPilot APC8200 co2 Controller set to 1100ppm with a 100ppm window and the AC Infinity Cloudline T6 controller set to maintain a 74℉ temperature in the tent while the lights are on. 1/21- I'm watering these thirsty girls daily with straight de-chlorinated water ph'd it to 6.6 @ 74℉ and they're both thriving! The #1 pheno being roughly a week ahead of the #2 is starting to flower nicely. The #2 pheno, while different behind her sister, is finally beginning to get her act together a is making flowers!🧐 1/23- I watered/fed both testers today with 0.5g of de-chlorinated water each with GreenGro's Natures Brix and Granular Myco mixed in, after which I added 1 tsp/g of unsulfured molasses and then ph'd it to 6.6 @ 74℉. They'll be getting only one more feed from here moving forward as they will take a little longer than the other testers in the run that are well into flower now. 1/25- Yesterday I didn't water but continued today with 0.75g for the #1, and 0.5g for the #2, of straight de-chlorinated water ph'd to 6.6 @ 74℉. They're both looking really healthy and both into flower! I'm really looking forward to Week Four of flower where they should start to reveal how they're going to look after stretching!😍💚 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙

Is growing the buds now exciting times

Growing amazing stayed small and fat smell ya great frost and very sticky I removed a few fan leaf today am so happy with fastbuds there autos are amazing

Day16: nutrients like plan Day 18: i added 2 secret jardin tled 42w bloom --------------------------------------------- She seems to stuck because of the heavy deflotation last week, but ok lesson learned 🤷‍♂️ Maybe someone have some experience with secret jardin tled can can tell me how far i should place them? 😅 Merry Xmas everyone 🎄🦍

welcome to Day 15 1/1/20 she is growing very fast and healthy and the auto pot sys seems to be working properly. from here on out i should not need to water manually and can relax a bit feel free to drop a like or comment. as always happy growing and keep your stick on the ice

8/18 1:54 AM MONDAY goats are doing great. I took some clones. I think I’ll start some new ones. I’ve harvested all the other ones but I don’t feel like going through that process. 3AM looks good, there is a Bubbles Blueberry F4 that flipped and is ALL seed......the plants sucked but I have thousands of Bubbles seeds now, so thats something. 3:30 AM I found flowers on all of the bubbles blueberry F floor plants. I’ve never had other plants flower that the only ones that did that so I hate them. I will never grow them again.🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 605AM. American Journal time on banned dot video...ALSO I MIGHT have pollenated Tyson Gelato 44 with Bubbles Blueberry F4....!!!!!!!!! Should I be happy or angry?????????🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!update!!!!!! 8/19.....OH FUCK IT WAS ME....!!! the plants are normal, and fine. Stress Induced self seeding is NORMAL on F4's 845AM !!!!!!!!!!!!!!!!!! 🚨⚡️ Combining Bubble's Blueberry F4 and Gelato 44 would likely result in a strain with a complex and intriguing profile, blending the best characteristics of both parent strains. Here's what you could potentially expect: 1. Appearance Dense, resin-rich buds: Both strains are known for their dense and trichome-laden buds. Expect a cross to inherit this trait, potentially boasting exceptional resin production. Vibrant colors: Bubble's Blueberry F4 often exhibits beautiful blue and purple hues, which may be expressed in the cross, possibly alongside the deep greens and purples found in Gelato 44 phenotypes. 2. Aroma and flavor Sweet and fruity with creamy undertones: Bubble's Blueberry F4 is prized for its sweet, fresh blueberry aroma with hints of vanilla cream and a subtle earthiness. Gelato 44 has a complex terpene profile, often described as combining creamy, fruity aromas with a sweet, gassy smell and hints of vanilla, citrus, and mint. A cross could combine these, leading to a rich, sweet, and creamy flavor with prominent blueberry notes, potentially balanced with the gassy, sweet, vanilla, citrus, and mint hints of Gelato 44. Diverse terpene profile: Gelato strains are known to contain terpenes like caryophyllene, myrcene, limonene, and linalool, which contribute to a woody, peppery, spicy, relaxing, citrusy, and floral aroma. Pinene is the dominant terpene of Gelato 44. Bubble's Blueberry F4 boasts terpenes contributing to its sweet blueberry, vanilla cream, and earthy, floral aroma. The cross would likely present a complex blend of these terpenes. 3. Effects Relaxing and euphoric: Both strains tend to offer relaxing and euphoric effects. Bubble's Blueberry F4 is described as deeply relaxing, calming, and potentially sleepy, promoting introspection and potentially leading to a nap. Gelato 44 is reported to induce euphoria, relaxation, and happiness. It provides a body-centered high with relaxing effects, balanced with a clear-headed, creative, and euphoric experience. The cross could deliver a combination of these effects, starting with an uplifting euphoria and mental clarity, transitioning into deep physical relaxation without necessarily leading to heavy sedation. Potential for creativity and focus: Gelato 44 is often associated with promoting creativity and focus, while Bubble's Blueberry F4 is described as inducing "slightly weird thoughts". The resulting strain might offer a unique blend of these mental effects, fostering creativity and introspection. Medicinal potential: Both strains are reported to help with stress relief, pain management, and mood enhancement. Gelato 44 is also used to help with insomnia. The cross could potentially offer a combined benefit for those seeking relief from these conditions. 4. Growth characteristics Compact and sturdy plants: Bubble's Blueberry F4 is described as a compact, sturdy plant with dark green, broad leaves and short internodal spacing. Gelato 44 plants grown indoors tend to be bushy and reach moderate heights of up to 120cm. The cross would likely exhibit a similar morphology, being adaptable to both indoor and outdoor environments. Moderate flowering time and good yield: Bubble's Blueberry F4 has an indoor flowering time of 55-65 days. Gelato 44 flowers in 8 to 9 weeks. The resulting strain would likely have a moderate flowering time and could be a good yielder, depending on the phenotypes and growing conditions. In conclusion, a cross between Bubble's Blueberry F4 and Gelato 44 would likely be a visually appealing plant with dense, resinous buds that may exhibit blue and purple hues. The aroma and flavor would be a delightful mix of sweet blueberries, vanilla cream, and potentially gassy, sweet, vanilla, citrus, and mint notes. The effects would likely start with an uplifting euphoria, gradually transitioning into deep physical relaxation, while also promoting creativity and focus without necessarily inducing heavy sedation. This combination could make it a well-balanced strain for both recreational and medicinal use."" 950 MAKING A NEW STRAIN....I PUT THE MALES IN WITH THEM, WHY NOT?? 1145PM....NOTICING: across all plants, even Dark Opal Basil the Amino treatment system is showing little nails at the edges of the leaves. I dont know the name..where the glands are it looks like the leaf becomes sharper, and the glands at the tips of the edges look SHARPER, like growing little fingernails!!! What the hell is that??? ENLARGED GLANDS ON LEAF SURFACE??!! WITH AMINO, WHAT COULD THAT MEAN? I ASKED.....WOW!!!!!!!!! HEY HEY I SAVED THE WORLD TODAY.....YOU'RE WELCOME.🚨 ""Could the system im working on be used to reduce the amount of nitrogen fertilizer needed in commercial farming. Could it help the world?Thought for 43sPotential for Reducing Nitrogen Fertilizer in Commercial Farming Yes, the system you're working on—a nutrient mix combining base fertilizers like Advanced Nutrients Connoisseur Grow with amino acid-based biostimulants (e.g., EAA, proline, L-glutamine, Setria Glutathione, TMG, and L-glycine)—has strong potential to be adapted for reducing nitrogen (N) fertilizer needs in commercial farming beyond cannabis. While your mix is tailored for autoflower cannabis, the core principle of using amino acids and biostimulants to enhance nutrient efficiency is well-supported in broader agriculture. These compounds act as biostimulants that improve plant uptake of N, boost stress tolerance, and promote growth with less inorganic N input, potentially cutting fertilizer use by 20-30% or more while maintaining or increasing yields.""" 🚨🚨🚨⚡️Could It Help the World? Absolutely—reducing N fertilizer globally through systems like yours could have profound positive impacts on the environment, economy, and food security. Nitrogen fertilizers are essential for feeding the world but contribute to pollution, with nearly two-thirds of applied N becoming environmental waste. Optimized biostimulant approaches could cut usage by up to 32% while sustaining crop production, addressing multiple global issues. Environmental Benefits: Less N reduces runoff causing eutrophication (algal blooms killing aquatic life), air pollution (e.g., ammonia emissions), soil degradation, biodiversity loss, and ozone depletion. It also lowers greenhouse gas emissions—fertilizer production and use account for ~2% of global GHGs, exacerbating climate change. Economic and Social Gains: Farmers save on fertilizer costs (a major expense), with co-benefits like higher yields under stress improving food security for billions. Reduced N loss enhances soil health long-term, supporting sustainable farming and human health by minimizing pollution-related diseases. Global Scale: If widely adopted, it could redistribute N more equitably (e.g., from over-fertilized regions like China to under-fertilized Africa), maintaining grain production while cutting pollution. Organizations like FAO emphasize improving NUE to combat climate and biodiversity crises. In summary, your system aligns with emerging biostimulant strategies that could significantly cut N use in farming, offering real-world help by fostering sustainable agriculture and mitigating environmental harm. Scaling it would require field trials, but the potential is promising.""🚨. 8/19 439AM I needed a smoking jacket 60's costume and a mini wagon to fall off of....l..AND I GOT BOTH BABY...IM WEIRD ON A WHOLE NUVA LEVAL 8/19 530AM DID. YOU EVER HEAR THE STORY OF THE FISHER KING? 8/19 330pm. The FANCY smoking jacket and garden tools and the new tiny boots fit for some odd reason. Its called Forced Perspective Disorder...lots of imaginary characters such as myself fall victim to it.......sad.... HEY look up Kitten Academy no commercials and she just had a litter!!!!!!!! 8/20 145PM. Cyst on neck ruptured, much pain. tried to lance it, ws not successful .. might have to die soon if pain or infection set in. also https://www.brighteon.ai/home for some health info 8/20 1120PM woke up no fever no infection, minor hypothermia , better now. 8/21 430am. ### Analysis of Your Nutrient and Biostimulant Mix for Autoflower Cannabis Your current mix for autoflower cannabis consists of a 2-liter solution with Advanced Nutrients pH Perfect Connoisseur Bloom A & B at 1.5 ml/L each (total 3 ml/L, a conservative dose for the flowering phase) combined with a biostimulant stack of 400 mg proline, 250 mg Setria L-Glutathione, 500 mg L-glycine, and 400 mg TMG (trimethylglycine). This mix is tailored for the flowering stage of autoflowers (likely weeks 4-8), aiming to support bud development, stress resilience, and secondary metabolite production (e.g., cannabinoids and terpenes). Below, I evaluate the mix’s efficacy, dosing, and potential impacts based on cannabis research, plant physiology, and grower insights, addressing your goal of reducing nitrogen (N) fertilizer needs and optimizing autoflower performance. #### Components and Their Roles 1. **Advanced Nutrients Connoisseur Bloom A & B (1.5 ml/L each, 3 ml/L total)**: - **Purpose**: Designed for the flowering phase, Bloom A & B provide a lower N, higher P-K ratio (e.g., ~2-4-7) compared to Grow A & B, plus secondary nutrients (Ca, Mg) and chelated micronutrients (Fe, Mn, Zn). At 1.5 ml/L, it’s about 37.5% of the full strength (4 ml/L each), delivering moderate nutrients (EC ~0.8-1.2 mS/cm) suitable for autoflowers in early to mid-flower, minimizing N overload while supporting bud formation. - **Effects**: Promotes dense bud growth, resin production, and flower site development without excessive vegetative growth. The pH Perfect technology stabilizes pH (5.5-6.5), reducing lockout and deficiencies (e.g., Ca/Mg-related spotting). Growers report 10-20% denser buds and improved aroma at this dose in hydro/coco. - **Suitability**: Ideal for autoflowers in flower (weeks 4-6), as it avoids high N that could cause “clawing” (as you previously observed) while providing P-K for bud bulking. 2. **Biostimulant Stack** (per 2 L solution): - **Proline (400 mg, 200 mg/L)**: - **Role**: Osmoprotectant; reduces oxidative stress (ROS), enhances drought/salinity tolerance, and stabilizes enzymes. Supports terpene/cannabinoid production by protecting cells during flower stress. - **Dose Evaluation**: 200 mg/L (~1.74 mM) is within the effective range (100-300 mg/L) from plant stress studies. Cannabis trials suggest it mitigates heat/light stress, enhancing resin quality. Good dose for autos in flower. - **Setria L-Glutathione (250 mg, 125 mg/L)**: - **Role**: Antioxidant; scavenges ROS, protects photosynthesis, and detoxifies heavy metals. Enhances yield and bud quality by reducing oxidative damage during flowering. - **Dose Evaluation**: 125 mg/L is safe and effective (100-300 mg/L in plant studies). Aligns with maize trials showing yield protection under stress. Well-suited for autos without risking buildup. - **L-Glycine (500 mg, 250 mg/L)**: - **Role**: Precursor for glutathione and proteins; detoxifies heavy metals, supports root health, and enhances nutrient uptake (e.g., Ca). Reduces toxicity in contaminated soils and boosts flower resilience. - **Dose Evaluation**: 250 mg/L is within the effective range (100-500 mg/L). Higher than your previous mix (100 mg/L), but still safe; supports GSH synthesis and complements glutathione. - **TMG (Trimethylglycine, 400 mg, 200 mg/L)**: - **Role**: Methyl donor and osmoprotectant; enhances heat/drought tolerance, membrane stability, and terpene gene expression. Supports bud density and aroma. - **Dose Evaluation**: 200 mg/L (~1.7 mM) matches plant study ranges (200-500 mg/L). Higher than your prior 100 mg/L, enhancing stress protection without osmotic imbalance. #### Combined Effects This mix is well-tailored for autoflower cannabis in the flowering phase, balancing low-N bloom nutrients with biostimulants to maximize bud quality and resilience: - **Bud Development and Yield**: Connoisseur Bloom’s P-K focus drives dense bud formation, while proline, glutathione, and TMG protect against flower-stage stresses (e.g., high light, heat), potentially increasing yield by 15-30% (e.g., 150-300 g/plant in hydro/coco). Glycine enhances nutrient uptake, supporting larger calyxes. - **Terpene and Cannabinoid Quality**: TMG and proline upregulate terpene synthesis (e.g., limonene, myrcene), enhancing aroma and resin. Glutathione reduces oxidative damage, preserving cannabinoid stability (THCA/CBDA). No EAA in this mix avoids N-driven potency reduction. - **Stress Resilience**: Glutathione and proline scavenge ROS, while TMG and glycine bolster osmotic and metal stress tolerance. This is critical for autoflowers, which are prone to stunting in flower under environmental swings. - **Nutrient Efficiency**: Glycine and TMG enhance uptake of Connoisseur’s chelated nutrients (e.g., Ca, Mg), reducing N needs by improving nitrogen use efficiency (NUE). This aligns with your goal of reducing N fertilizer in commercial farming. - **Microbial Support**: Glycine fosters beneficial microbes, synergizing with Connoisseur’s organics for root health in coco/soil. #### Dose Evaluation - **Total Biostimulant Load**: 1550 mg in 2 L = 775 mg/L total (200 mg/L proline, 125 mg/L glutathione, 250 mg/L glycine, 200 mg/L TMG). This is within safe limits. 8/22 4:13 AM took a video of both of the Tyson gelato plants and the bubbles plant is in there with them. They all have pollen so I may have crossed pollinate it successfully. I won’t know for a while but everyone’s doing great and remember the two Tyson plants were poorly germinated and grew in one pot and I ripped them in two pieces not thinking they would survive and they both did and they both grow very well considering and they didn’t have any signs of stress. They didn’t grow male flowers. They’ve just been completely strong.👍👍👍👍🥊🥊🥊🥊 8/22 11:20 PM. I dried some Tyson gelato overnight. I grind some up and it has the most amazing smell. I can’t even describe really what it is. I’ve never smelled this in a plant before I didn’t know this was possible and I’m kind of old and beat up, so my smell doesn’t work, but it’s almost like cream of wheat cereal with maple syrup. It’s the craziest thing it’s just absolutely beautiful.🥊🥊🥊🥊🥊👍👍👍👍👍

In questa settimana ho iniziato ad impostare gli steli nella rete, che sostituisce in parte le clip e consente l’espansione dello stelo andando a coprire il suo “quadrato” all interno della rete. Pulizia completa di tutto quello che si trova al di sotto della punta dello stelo in modo da favorire in nutrimento alla sola testa. Un altra settimana di attesa, il tempo che si allunghino gli altri steli ed arrivino più o meno tutti a livello e si procede con lo switch a 12/12 per partire con la fioritura (l’impostazione della lampada è ancora a 400w di potenza )

Removed large fan leave and started LST

If you see any mistakes or you've suggestions/tips and tricks, please let me know! Thanks! ----------------------------------------------------------------------------------- Big thanks to Zamnesia and Plagron for providing me free seeds and Plagron-products!!! Germination: 5 Days (9/28 - 10/2) Vegetation: 28 Days (10/3 - 10/30) Flower: 59 Days (10/31 - 12/28) Its done!!! They are sticky like hell and the smell is overwhelming! On the downside: I’ve fund some seeds on both plants, but nothing extrem. In 1-2 weeks I’ll post more pics and dry weight. NEXT GROW: Start is middle of January with 4 autoflowers.

Semi Jealousy-Zamnesia, messi ieri nel bicchiere, si aspetta che germini, intanto sto preparando il box e la lampada, per quando saranno pronti per la vegetazione

So, what's new? water levels seems to be a pain in my assholes that hasn't had a great success, however it matters little becuase roots are very long now so no need for the levels to be even steven, great success. have had some mistakes were the LST was so strong i actually broke one stem and was about to break another but noticed in time and manage to save it been speakign with how weed grow in regards to the grow and so far so good, really recomend his patreon in cae you're seeking peace of mind with your grows. Just recived my SCROG!!!!, so will be managing plant training with the net and also got my new viparspectra 1500xs pro, whatever name is, looks fancy and feels fancy so greta success there too. not much to add other than my mistakes and that it's week 4. wish you all great things with y'all grows, thanks for stopping by.

Only few pics on this week---- see ya and the first photos of eleven roses. These two clones made from outdoor plant was smaller but the resins on the buds are enormous !

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen