Things are still looking good, being aggressive with the hydroguard

Vamos familia, esto ya va cogiendo de nuevo forma, me encanta esta variedad do sweet dos de sweet seeds es brutal, cepa cruzada x cookies 🍪, es un híbrido que bien cultivado no falla. . El ph como siempre 5,8 , la temperatura es óptima, en 22/24 grados de media, y la humedad actualmente está entre el 60/70%. . AgroBeta: 0,8 ml x L Piramid , vía radicular. 0,6 ml x L Growth black line , vía radicular. 0,1 gr x L Cancerbero , vía radicular. 0,1 ml x L Tucán , vía radicular. 0,1 ml x L Flash Root , vía radicular. 0,4 ml x L Great Green , vía foliar. 0,05 ml x L Gold Joker, vía radicular. . Esto es todo, espero que os vaya gustando el cómo va avanzando esto se ven con buen porte, es un cultivo que si va todo como hasta ahora , va ser increíble. Muy buenos humos 💨💨💨.

🌱 Finalizando la semana 3 y con buenas noticias 🌱 Efectivamente, esa carencia que venía notando estaba relacionada con calcio y magnesio. Después de añadir Calmag, las plantas empezaron a mostrar más vigor y mejor desarrollo. Hace unos días realicé el trasplante a macetas de 11L, probablemente las definitivas, aunque esto dependerá de cómo avancemos en las próximas semanas. 💪 A partir de ese trasplante, también comencé a incluir BioGrow en el riego, para potenciar el crecimiento. 📝 Dato útil: Antes de trasplantar, esperé a que el sustrato estuviera un poco más seco y compacto, lo que facilitó muchísimo el proceso. Luego, en ese primer riego post-trasplante, aproveché para aplicar fertilizantes. ¡Seguimos avanzando y viendo los cambios día a día! 🚀🌿

Last week was Perfect weather conditions with 20°C ~ 30°C at daytime and 8°C ~ 15°C at night and humidity always around 35 - 50 %. weather frog says it is going to be absolute ASS next week with way lower temperatures and higher humidity.

Growing great I open my tent smells like dead fruit love it 😀 can't wait for these flowers to form and show the true character of this cultivar

So the pics are few days old due to there being a problem with my page for some reason. Buds aren’t really getting fat and the girls have yellowed quite a bit since I took these pics on Monday. Still learning I think I just didn’t start feeding them early or heavily enough and they never really recovered. It looks like my yields will be well down vs my 2nd grow which was all organic... which I may go back to for G4. Anyways, given them big feeds and plan to harvest the most developed plant end of this week and let the others go another few weeks to see if they gain any weight. So lessons learnt. Can’t wait to get these down and start fresh. Thanks for reading have a great week 😊

Still ok 👍

It was my first grow so I know my next crack at this strain would be much better. I didn't have too many issues or any crazy setbacks. It was smooth sailing for a while and then had some nute/deficiency issues but it was later in flower. I did move them into a bigger tent with a far better light but not until the last 3 weeks of flower. So I know I'll have to grow this again in the future and compare!

Hermoso progreso de esta nena, comiendo volumen y aumentando considerablemente la producción de resina. Me encanta la forma en que se desarrolló la estructura que soportará densos cogollos como puede verse. Es todo por ahora, Buenos Humos!

End of week 5. Huge gains in all ways. Plants are quite big and lots of buds developing really fast. So far they are much more ahead of the other strains I'm running. Very fast plant. Very smelly, delicious.

These 6 slurricane are set up to be some frosty MFr's. 4 phenos, im hoping at least one of em is the frostiest nug ive ever seen, cuz thats what the marketing told me. A smaller stature plant than some of the others, but one of em is just a fkn mutant. The growth in the coco/perlite hempy's is astounding, right up there with DWC. Many of these girls have outgrown their mother which resides in 5 gallons of soilless. Loving the node structure and red stems on this plant. F11 and all is good. Environment on point, smell in check, and visiting the garden only 3 times a week. Stay tuned for some monster nuggies!!!

Germination date 🌱 02/12/2021 Day 73 16/02/2022 Strain 🍁 Barney's Farms Biscotti Mintz (Biscotti x Mintz) THC% • 30% 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Dr Forest (dry amendments) Grow Bloom Bloom2 🌱 Growing Media • Soil Notes 📝 I'd be lucky to get a oz off this girl but she does smell amazing. Getting some burnt looking orange hairs on some Buds but nothing on the other plants. Top feed done 💚🌱 Discount codes in bio for Mars hydro

Sponsored grow 👉WeedSeedsExpress👈 Week 7 / Flower week 3 2/23-3/1 Week 7 flower week 4 Love Potion is in flower, the buds are puffing out with many white pistols. Trichomes are just starting to form Love Potion got her first defoliation removing fans and any bud sites and more pins added on 2/24. Since I have overfed my gals, this week I am trying to remove excess fertilizer from the planting medium by giving ph 6.5 water only. I am hoping since Love Potion is behind the other gals, I’ve addressed the over feeding issue and she will not show burnt tips and look pretty out her life. Ph 6.5 Temp 65 Thank You @WeedSeedsExpress for the opportunity to grow your strains. Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

Hey folks, Transplant done today, May 30th, into the final pot. Now she’s in Buddha’s hands 🕉️😄 This one was tricky to transfer—I knew it would be tough since I let the roots grow too much due to lack of time to properly focus on this project and the extra time wait for the order with the Leca base to arrive! That made it hard to separate the soil from the rootball and position it over Buddha. I really should’ve done it at week two, or starting in a smaller pot to avoid all that root chaos! 😅 But hey, let’s see how she responds and what the final result will be! 🤞🏻💚🧡 ------------------------------------------------------------- 31/05/2025 When I cleaned the roots, she wilted a bit—as expected—but just a few hours later, that same night, her leaves were perky again, showing that everything went smoothly and she's full of strength! 😄 Today I cut a small branch and a leaf that were growing in the direction I want to twist the plant into a spiral, as you can see in the video. A few more hours and she should be perky again 🙂

13/06/25: Last week of these autos in the grow box, weather is clearing up and they will move outside soon! The Plan to give them a little jumpstart in the early veg is coming together nicely and they took the repotting like nothing at all! 14/06/25: vigorous growth. 3 days since repot; and i can already see roots at the drainage holes, insane! 17/06/25: Started hardening off by putting the plants outside in the evening (6 - 8pm) ☀️ 18/06/25: Hardening off from 4 -8pm, and I could already see the first pistils at the top nodes...tbh honest I hoped to get a few more days or even an extra week of veg but stretch is already incoming! 😔 I directly Repotted to ~13 L per plant and put some extra perlite into the final soil so I can get some decent roots on these ladies! I guess we learn as we grow 19/06/25: Today they got direct Sun from 2 - 6 pm and will stay outdoors from now on!

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Topping

🍡

Started 8 seeds (friend’s hermed a deimos and got seeds and gave me) at a wet towell paper and moved to a basic garden soil that i had at home. Transfered 5 to 1.5Liter pots 50% peat moss 50% perlite with 0 EC and got stunted at the start for 1 and a half month and at week 14 transfered 3 of them at larger pots as described and kept one of the remaining 1.5Liter pot. Watering with just water until i flip to flower because of recent transfer to rich soil. one of the transplanted to bigger pots was stuck for 2 months and then turned out to become a "monster cropped" plant without aplying any techniques to achieve this condition, after stunt started growing in multiple directions. 07/16/2023 - flipped to 12/12 light. 07/17/2023 - fed with 0.5 ml/L biobizz bio-bloom / 0.5 ml/L biobizz top max / 0.5 ml/L biobizz bio-heaven - 225 PPM. lower than indicated dosage because organic soil still has some stored to spare. bigger one - 700 ml monster crop one - 500ml the other one - 700ml 07/18/2023 - sprayed neem oil after lights off as a pest preventive. 07/20/2023 - fed with biobizz line: 0,4 ml/L bio-grow 0,4 ml/L bio-bloom, 0,4 ml/L top max, 0,3ml/L bio-heaven and 0,4ml/L alg-a-mic. still lower dosage than indicated by biobizz because no signs of deficiency and soil seems to be full of nutes still. bigger one - 500ml monster crop - 300ml the other - 500ml 7/21/2023 - im sure i miscalculated number of plants x grow area and im having some space problems. As a try to fix this i removed a quite large number of leafs that was covering some bud spots.