Fastbuds - Mimosa (2x) 08/27 Coming into week 4 Veg, User error stunted them lightly but things seem back on track. Exhale 365 C02 bag introduced last week to setup for early flower. No signs of concern or any deficiencies. Early flowering has begun *Mid-Week Update* *08/30* Both plants have recovered nicely, and placed under trellis net. Introduced NPK Phosphate Purged Pure Blend Pro Grow *End of week recap* Flowering has begun Stopped veg nute feed Introduced Raw NPK Phosphorus and Potassium

Bonjour à tous les padawans et les maîtres jedis Cette plante est vraiment exceptionnelle! Elle représente la force et j'en suis fier 😍 La semaine 4 est déjà la ! Ma plante est saine le LST ce passe relativement bien je l'ajuste tout les jour je le combine avec la technique du pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Le pinçage est une pratique courante en horticulture. Beaucoup de cultivateurs l'utilisent pour améliorer le rendement de leurs plantations cannabiques ou autres. Il est souvent question de 'taille' des bourgeons apicaux. Cette taille se pratique également mais il n'est plus alors, à proprement parler, question de pinçage. A l'instar d'une taille, le pinçage va permettre de stimuler le développement des ramifications tout en préservant les sommités en vue de la floraison. Il est très utile pour uniformiser une canopée. Pour réaliser le pinçage, il vous suffit de presser 'fermement' la tige [entre le pouce et l'index] aux environs de l'apex jusqu'à sentir un léger 'crAck'. Cela aura pour résultat d'endommager les vaisseaux impliqués dans la circulation de la sève [situés dans le pourtour de la tige], la tige conserve toutefois une certaine rigidité. Pour obtenir le même résultat, il est également possible de vriller légèrement la tige sur elle-même. L'interruption du circuit d'alimentation entre le ou les apex et le reste du plant va provoquer un déséquilibre hormonal qui aura pour conséquence le développement des ramifications antérieures au point de pinçage. Jour 25 j'arrose mon pot normalement avec un quart de son volume en eau toujours avec un PH de 6.3 à cette eau j'ajoute 0.7 gramme de greenhouse feeding enhancer pour favoriser son développement racinaire. Par la suite je n'aurai plus qu'à ajuster mon LST jusqu'au stretch et surveiller mon arrosage, Je pincerai mes apex suivant la pousse de la plante pour uniformiser la canopé. Petit rappel de ce que est le LST et comment le pratiquer le plus efficacement possible: Quand commencer à appliquer la technique LST De nombreux cultivateurs commencent la manipulation dés que les plantes possèdent entre 3 et 6 nœuds ou une paire de feuilles. Durant cette première étape de la croissance, le tronc encore flexible est pliable sans risque qu’il ne se casse, même si au fur et à mesure du développement de la plante il sera de plus en plus difficile de le plier. Nous pouvons continuer à guider la croissance des branches durant toute la culture, même durant la floraison, ce qui pour cette étape représente un grand avantage face à la taille, qui n’est pas du tout recommandé une fois que la formation des têtes commence, cela stressera en effet la plante, ce qui aura pour effet de retarder la récolte. Comment appliquer la technique de guidage LST Si nous sommes prudents, la flexibilité naturelle des fibres du cannabis permet de plier leur tronc et branches avec une relative facilitée, même durant la floraison des plantes. En utilisant une corde fine, nous pouvons accrocher la pointe de la plante à la base du pot par exemple ou à un tuteur que nous aurons planté dans le substrat. Nous plierons le tronc avec précaution et nous le fixerons avec la corde, à partir de là, nous pouvons augmenter progressivement la tension de la corde, chaque jour un peu plus, jusqu’à obtenir la position souhaitée. Soyez attentif à la réaction de la plante, essayez de ne pas appliquer trop de pression sur la corde et rappelez-vous que la flexibilité des branches peut varier d’une plante à l’autre. Pour obtenir de meilleurs résultats, il suffit de suivre quelques règles simples. Pour commencer, nous devons choisir une corde fine mais pas trop pour ne pas blesser les troncs au fur et à mesure qu’ils grandissent et qu’ils deviennent plus gros. Nous pouvons utiliser des crochets en plastique souple ou de n’importe quelle autre matière flexible pour éviter d’endommager les plantes. Spécialement en intérieur, utiliser des cordons en plastique de couleur (voir les diaries de @Silky) est très pratique pour voir facilement les accroches et faciliter le travail au milieu du réseau formés par les cordes, les tuteurs, les mailles ou les supports que nous aurons dans la culture. Bien entendu, en culture extérieure et surtout en guerilla nous ferons juste le contraire et nous utiliserons des matériaux de couleur qui n’attirent pas l’attention pour que notre jardin reste discret. Pour stresser les plantes au minimum, la mieux est de réaliser ces manipulations le soir ou juste après que les lampes en intérieur s’éteignent, ce qui leur permettra de se remettre durant la nuit. Normalement, le jour suivant nous pourrons observer comme les pointes des branches que nous avons pliées se dressent de nouveau vers le haut à la recherche d’une source de lumière. Je combine un pincage d'Apex (explications plus haut) au LST cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Que la force soit avec vous 💪

Quarter Pounder and Skywalker are probably over due for final flushing. Squanch Queen is doing very well and looking to go 9 to 10 weeks. King tut and Alien Technology doing well. However, i did a spray of insecticidal soap due to seeing a couple small holes in a few king tut leaves. Next day plant was shocked and lost tons of leaves to burn. This plant did this once before with the same spray, the others no problem and didnt connect the two til now. Will let her veg back to health and flip to flower once shes healthy again and the autos are done.

Hi growers! Milkyway has started forming very hard flowers covered with trichomes and the smell of the flower is really amazing!

I think she did not produced any more bananas. She is frosty as a northpole though :) One of the the most intense oily trichome production I have ever seen. Terps are amazing, AMAZING. wish she was a bit more stable. Candy Lemon Banana, to die for.

Man, that plant is really taking off. It's finally starting to look just like the good old Gas House Parent. I can almost smell it already. Can't wait to see how much bigger it gets! Well, another year has come and gone. Yesterday was New Year's Eve, and I want to wish all of you a happy and healthy 2025. May this year bring you all the things you've been wishing for. Let's make this the best year yet!

March 15, 2024 Day 29 I didn't end up doing a lot today. I watered in a full liter of the new nutrient regimen per plant. They seem to have taken well to it. No signs of stress yet. Took some pictures and measured the plants. I forgot to measure the light distance, which I will do at some point today. I also didn't activate the bottom feed system today. I'll do that tomorrow morning. I wanted to see if there was any stress. Nothing, so tomorrow it is. So over the last week, I had to start training and the plants grew a good 5" through the week. They are about 8" tall now, after the training, which I might add went swimmingly. The side branches took off immediately and I'll be tying those down in the next day or 2. They are both a lush green color with Banana Purple Punch B being super tight. It will definitely need a defoliation. Banana Purple Punch A is really different in stature. Not so compact, but the same leaf structure. So far I'm happy with this run. The environment is still doing quite well. I will keep the temps around 77° and the humidity down a bit lower to around 55%, if I can get it there. I'll update lighting tomorrow. Currently the PAR is 550 ppfd. However, they aren't out of veg yet. I may keep the lights as they are for the time being. Maybe til the middle of the week and then I'll increase the DLI to around 40 mol/m²/d for the rest of the week. Grow System Environment: Temp: 73.7° RH: 60.9% VPD: 1.08 kPa March 16, 2024 Today was a busy day. Finished up everything I didn't do yesterday. Both plants got their bottom feed system activated. The roots aren't quite out far enough, but that should t be a problem. The containers should start absorbing through the wicks in no time. Then the concentration of water will be on the bottom half bringing the roots all the way down and spread out. It should be quite successful. They also got fully trained. All taller branches tied down. The tops were readjusted a smidge. But the main branches were tied down. Banana Purple Punch B is still really bushy and compact. Training helped quite a bit, but there still massive leaves and short nodes. Banana Purple Punch A is perfect. She has beautiful internodal spacing that helped keep the canopy opened and ready to fill in. Her leaves are massive, but were easily moved around. Both plants have beautiful colors and are the same height. So far so good. Let's hope I can keep up through the stretch. The lighting is staying the same for now. The distance is now 24" and the PAR is 600 ppfd. I may peek at 80% power today to see what the reading is. If it's around 650, I'll keep it there. If higher, I'll drop it back down. Then I'll increase it next week. Next week should be pre-flower or at some point this week. The environment is also good. It's been a bit cold the past couple of days, so the temp is hovering around 75° instead of 77° and the humidity is a little high at 61%. Grow System Environment: Temp: 73.3° RH: 59.9% VPD: 1.09 kPa March 17, 2024 Not much to do today. The bottom feeding systems are running perfectly. The soil moisture level is now at 30% and that's where I'm keeping it for now. I made 2 training adjustments today on Banana Purple Punch A just a couple branches pulled back down. However, Banana Purple Punch B is too bushy already. I'm going to have to defoliate in a couple days I think. Also, the main top tie down was useless. The plant just grew more and completely knocked off the tie down. I can't do it again for now. Not until there's a bit of stretch. However, the side branches I pulled down are looking good, but still super dense. I'll most likely cut the main stalk fan leaves off. That should do the trick. The light was raised 2" today. Hopefully it helps with praying. There isn't any and I'm wondering if the light needs to be brighter. It's kind of counterintuitive, but if the lack of light doesn't induce praying, then maybe it's not bright enough. The sweet spot needs to be somewhere for this strain. I'll figure it out. Other than that, some pictures today and monitoring the water intake. Update: I decided to increase the power to 80%. That should help with the temp and humidity. The DLI is 41.5 mol/m²/d. This should be perfect for this stage in the grow. Grow System Environment: Temp: 74.0° RH: 59.2% VPD: 1.14 kPa March 18, 2024 Looking great today! The bottom feed systems are fully active and the soil moisture is at 36% throughout. It's a tiny bit wetter on the bottom where the feed system is, but nothing crazy. There's about a half gallon left from the initial activation. That should last the rest of the week. Then I can add new water and nutes. Because this is a bottom feed system and the soil is more like coco coir, I will have to run a constant feeding regimen. Maybe every few waterings I'll run a half gallon of plain PHed water to 6.0. everything else with watering is fantastic. I couldn't ask for a better outcome with the startup. The ending result is a nice crust on the top soil to help lock moisture in and prevent bugs from laying eggs. Both ladies got a full training adjustment. As well as a few branches that finally got long enough to tie down. Banana Purple Punch A is looking great! The main top is doubled over like a horseshoe. But no breaks or anything. Banana Purple Punch B is also looking great. Super lunch full leaves. Still extremely short nodes, but I can deal with that in a week or so when I defoliate. These two plants are very different. Definitely different phenomes where Banana Purple Punch A is more on the hybrid side while Banana Purple Punch B is definitely a solid indica. We'll see what happens in the end. I feel I'm going to have to train Banana Purple Punch B differently. The top won't stay down, so I'm either going to top it or just defoliate and tie down the branches for light and air circulation. Hopefully because of her tight stature, she won't stretch past the other plants in the tent and the canopy stays level. We shall see. Lighting is spot on with the plants praying slightly. I guess my theory made sense. It's not the lack of light that causes praying, not too much light. I now understand the "sweet spot". I'll have to ensure it stays in the sweet spot for the rest of the grow. It should with my lighting schedule. The environment is finally adjusting back to normal, with the temp being around 76° and the humidity at 56%. Nothing to complain about here. Grow System Environment: Temp: 74.8° RH: 59.8 VPD: 1.16 kPa March 19, 2024 Not much going on today. I did some minor adjustments to the plants tied downs. Rotated them slightly for a better fit in the tent. I also separated the basins and now they are in their own quadrants. No sense in watering today. The basins are still about 1/4 full. They will definitely need to be refilled in a couple days. Perfect timing. The plants themselves are looking great. Banana Purple Punch A has a bit of nitrogen toxicity. I'll have to drop the nutrients down next refill a bit. Maybe 10 ml instead of 12 ml. Banana Purple Punch B is still super bushy and tight. I might have to top her if she takes off and starts getting taller than the other plants in the canopy. I did make adjustments to the tie downs and pulled two top branches down. The plant is seriously compact, but the same size as her sister plant. When she takes off, I will be expecting a robust and strong plant. Also, I'd like to mention the stem is super thick on both plants, especially with Banana Purple Punch B. Very promising for a heavy yield. So based on my last run, if everything goes as it's going currently, I should expect 36" plants. At that size and the density this strain has, I may be expecting a good 9 oz from each plant. Unless I can get slightly bigger plants, then maybe 12 oz. Who knows. My last grow had one plant yield 21.5 oz. This run is better so far in every aspect. No accidents with topping or light issues, or environmental factors. Feeding has been really good. With the current exception having a slight nitrogen toxicity, which I will fix ASAP. Lighting is looking great! I may have to raise it an inch or so later today, if not tomorrow. I'll leave it at this power level for the next couple weeks until we are in full swing flower, then I'll increase the power again and adjust accordingly. I may not even get to 100% power. Wouldn't that be nice. The environment is looking really good. The temp is around 76° and the humidity is at a solid 57% during the day. Maybe even perfect for this week in the grow. Grow System Environment: Temp: 73.8° RH: 56.5% VPD: 1.21 kPa March 20, 2024 Today was a bit busy. So far I tied down some new branches that were finally long enough to tie down. Only on Banana Purple Punch A. She needed adjustments for the whole plant. Very happy with the growth so far. Banana Purple Punch B had her branches adjusted, but now I'm really concerned with her taking off and getting taller than the rest of the canopy. I'm thinking she needs to be topped. Just in case. I may ask a question and see what the community thinks. Roots aren't showing totally yet, so I can only imagine what the root balls look like. Maybe they will get big, following big plants. Banana Purple Punch B hasn't shown any roots yet, but I expect roots to pop out any day now. We aren't in pre-flower yet, so there's still plenty of room to grow and plenty of time for me to shape my ladies. So far, the way things are going promises a bountiful yield and a full tent. The reservoirs are nearly empty. Banana Purple Punch A is actually at the bottom and just about dried up. This time around, I can let the basins dry out. In regards to nutrients, funnily enough, Banana Purple Punch A has nitrogen toxicity. It's definitely from the huge boost in nutrients. I'll drop the nutes back down to around 8 ml instead of 12 ml. This next watering will have to be with Cal/Mag. Just to get rid of the toxicity. Then back to 8 ml of base nutrients. As for lighting, I raised the light an inch to keep it at 24" from the canopy. The PAR is around 625 ppfd. I don't need to increase the power level yet, but soon I think. The environment is back to being spot on. The temp is back around 76° to 77° and the humidity is hovering around 56%. The VPD is right where it needs to be. I'm quite happy. Update: I decided to try tying down the top of Banana Purple Punch B one last time. If it doesn't take and it's standing straight up tomorrow, I'll have to top her. It should take this time. The bend is a perfect 90 degree angle. And this time I made sure to secure the tie straight down and tied it to a side branch. The side branches are super thick, so it will definitely hold. Grow System Environment: Temp: 73.7° RH: 56.6% VPD: 1.20 kPa March 21, 2024 Not much going on today. Both basins were refilled today with 10 ml instead of 12 ml. I probably should have run the plain water as I originally thought, but then I don't want to lose out on precious nutrients. The nitrogen toxicity should go away. Hell, it might even go away when the plant gets bigger. Speaking of getting bigger, they are taking off now. Banana Purple Punch A is kind of a tangled mess. It's beautiful. Great color huge leaves. Some 7 finger leaves coming out. The training is working quite well with the side branches sticking out past the boundaries of the container by a good few inches all around. Banana Purple Punch B is the most well rounded plant in shape and structure. The top tie down took swimmingly. A perfect 90° bend. Each branch has its own space. Because the plants is so compact, this was the only way I could train her. The difference is that I like to tie down the whole plant at first. This plant was a no go, so it has quite a uniform shape going on. Still it's different. So the plant will turn out different than her sister plant. The light needed to be raised a half inches today. Just to get that DLI at 40 mol/m²/d. Tomorrow I'll probably increase the power to 90%. The goal is to bring the DLI to 42 mol/m²/d and gradually let the plants grow into a DLI of 45 mol/m²/d. I will try to keep the light at 24" for the whole grow. As I said weeks ago, I'll go as low as 22", but any lower than that and my footprint gets too small. I may have to increase the power to 100% in 2 weeks. And keep the light at 24" or higher. Unless of course I run out of height space, then I have to remove the exhaust fan and left the light to the ceiling of the tent.etd hope it doesn't get to that point. Plants that tall are really difficult to manage in a 3x3 tent. The environment. The effing environment. It's freezing today. Around 21° f. My room has trouble getting over 72° in turn the temp of the tent is suffering at 74°. However, the humidity is still great at 56% to 57% all day. Sometimes it pops up to 58%, but that will change when it gets warmer and I can get my heater to work properly. I like to keep the bedroom at 74° during the day, so the tent hovers around 76° to 77°. Hopefully it will fix in a day or two. Grow System Environment: Temp: 73.0° RH: 56.3% VPD: 1.18 kPa

WEEK 10 flipping soon to🌺 first a little defol and a Lollipop🍭

End of week 3 here we are again with an update, I think they've stopt stretching and can focus on creating those nice tasty buds😋. Im still enjoying from the last cultivate🍬🍭 hm hm hmmm it's a really sweet smooth sativa. I can not wait! Until next week 🤙🏼

These ladies are huge. Buds are super dense and they are getting close. Starting flush 3 days ago. Had a little light. Stress but I think they Will be ok

Day 1 week 2 Day 2 week 2 Day 3 week 2

Week 8 update.... Plants are taking their sweet time. Hoping im doing this shit right. I trimmed some more popcorn bud branches and took out a bunch of fan leaves. Trying to utilize my light and control environment. Opened up the canopy with some pipe cleaners.... is it too early to guesstimate yield? Plants are 8 weeks, about 2 weeks into flower. . i figure i have another 50 days or so. Breeder gives 65 days for flowering. Im at around 15. Not counting the week stretch after first preflowers...... feeding about 2300 ppm. Light about 15 inches above canopy. Now it's the waiting game. Light staying where it's at. Ec staying where it's at until flush. They're shouldn't be many leaves growing back. My only thing i have to focus on is the amount of times i water a day and keeping an eye out for any cal mag deficiencies. Gave a little cal/mag/ nitrogen for the loss of leaves in tonight's feeding.

10/29: Watered 2 gallons in each plant. Pulled branches down and out to spread as wide as possible. Things are looking good, pulled a few dead leaves and it has a couple that have brown on the tips, but past experience tells me that it will pass and they will be fine. I'll keep an eye and determine if anything needs to be done. 11/2 - They lost the friend that was finishing up and gained a new friend who is in week 1 flower. This one is another non-diary plant that I began before being on here.

First week going smooth,just a little bit cold but still feeling good

I'm amped up about these 6 Gotti Ogs and these 2 Downtown Finest Og strains, there growing fast eating a lot and the weather is great in Cali. These indoor veg and outdoor flower is really working well for me. I'm using Flora nova bloom and there booming

The Harvest Prelude: After a patient wait and 48 hours of darkness, the moment arrived. The Tropical Tangie Lego Ninja, standing proudly like a silent guardian, was ready for the grand harvest. The sound of each cut echoed through the grow space, reminiscent of felling a mighty tree. The compact structure of the buds was awe-inspiring, a testament to the ninja's disciplined growth. The Lego Ninja, like a stoic warrior, was then hung upside down, beginning a two-week drying ritual. Maintaining an ambient temperature of around 21°C and a relative humidity of 60%, this slow-drying process allowed the buds to retain their essence, preserving the symphony of terpenes and cannabinoids. The trimming phase unfolded like a fragrant masterpiece. Each bud, adorned with a glistening layer of resin, transformed the trimming process into a sensory delight. The zesty aroma of oranges enveloped the room, a tangible expression of the tropical lineage. The compact buds made every snip a careful dance, revealing an abundance of frosty trichomes. The moment of reckoning arrived with the scale's unveiling. The Tropical Tangie Lego Ninja, from a single plant, bestowed upon me 309 grams of dried medicine. Each gram was a treasure trove of cannabinoids, a promise of euphoria and relief. The sheer compactness of the buds translated into a concentrated potency that left me in awe. In parallel, the clones, nurtured with equal care, showcased a fascinating divergence. A twist in the tale unfolded as the intense oranges of the mother transitioned into vibrant tangerines. This unique expression, I believe, was a testament to the clones weathering a summer heatwave differently, bringing forth a distinct personality. The clones, resilient and generous, gifted me a bountiful 549 grams of pure joy. This now my keeper of the garden, an embodiment of the Lego Ninja's legacy. The harvest dance, though familiar, carried the nuances of tangerine zest, a refreshing twist that left me eager to explore its intricacies. Both harvests shared a common thread—their resinous abundance. The trim bin, akin to a treasure chest, gleamed with golden trichomes and fragrant joy. Sticky fingers became a badge of honor, a tangible connection to the resinous richness that filled the room. Shout Outs: No harvest report is complete without expressions of gratitude. A special nod to @DutchPassion_Official for crafting the genetic marvel that is the Tropical Tangie Lego Ninja. Their expertise paved the way for this epic journey, and I tip my hat in acknowledgment. In conclusion: As the dust settles on this epic harvest saga, my heart brims with happiness and excitement. The Tropical Tangie Lego Ninja has proven itself not just as a plant but as a living masterpiece. Stay tuned for the smoke report, where we delve into the true essence of this botanical ninja's legacy. Until then, fellow cultivators, may your gardens flourish, and your harvests be as bountiful as the joy they bring. As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3 P.S- I must extend my sincerest apologies for the missing video reports. Regrettably, Grow Diaries is still facing some technical issues that are preventing me from uploading them. Rest assured, as soon as the situation is resolved, I'll share those videos to give you an even closer look at this fascinating journey. or in my case apparently GD dont let me do uploads over 100mb with is super small file if you working and editing videos , doing my best here to upload them all but GD is not making my life easy on this <3 <3 <3

Coming along nicely. I have to water it twice a day but that's to be expected with such a tiny pot. Should get a nice stick of bud out of it.