Hello if you're here👋😊 The journey continues. I have put a lot of time love and energy into this lady and she is rewarding me back by being super chill and laid back. She takes her food and just keeps getting bigger. Too many flower sites to count. She sits with her daughters and they are all growing at the same rate giving me a beautiful canopy. I have not needed to train anything as it's all growing very uniformed. I can only put this down to how even the photon distribution is on the SP3000. If anyone is looking to upgrade their lighting I can't recommend this light enough. 9 plants under it and it's at 55/60% on dimmer. 🤩🤩🤩 All plants are perfect. I decided to do some more LST and clear some of her lower leaf. I've bent flat all 16 colas so now all the flower sites have nowhere to go except up towards the mars hydro sun god... She is huge! I hope the flowers start to come soon. Thanks for the visit happy grows🌱🌿🌱 Stay safe😷😷

04/01 (M) As stated in previous update from last week (SEE week 25 update 04/01 (M) ) - Since has been fed accordingly and rebounding accordingly. 04/01 (C) Same as above for the babies (SEE week 25 update 04/01 (M) ) - They are rebounding accordingly as well - Never get to comfortable and execution are key - 04/08 - (M) - The Mom has bounced back nicely - The nutrient feed had to be increased to supplement for when the feeder malfunctioned - Her dead leaves will be pruned this week to prep for budding. 04/08 - (C) - The babies bounced back nicely as well from the EC/PPM/PH burn - Most of their has come back and numbers are optimal thus far. 04/11 - (M) - She bounced back tremendously - Ran her through a part defoliation (Round 1) - She has begun budding - She looks a little underweight but that is from clone stripping. 04/11 - (C) - The babies bounded back as well from the PPM/EC burn - Lost a healthy amount of the green during burn but it has since began coming back.

Good week

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Flushing one plant. The other plant i might start flushing next week. Cleaned up the late flowered plant. Defoliated a few leaves.

Big textwall incoming homies: Here Im doin some shit i knew from owning low to middle branded smd grow panels* how is that usually they come with both uv , ir, far red even newer quantum boards supplements itself with diverse chips extending their photosynthetic spectrum or making specific accesory bars / modules yet my purporse is rather focus on UV as this 15w bar (advertised as nominal 9 x 3w powered led) with UV-A 390-400nm spectrum – something that trigger some reaction to the plants with some other color son the flowering phase and trying to establish functional a ratio , as a bit of blue green and yellow have specific purposes instead of providing absurd quantities of red light , as there is some lateral cold bulbs in smaller but necessary ratios (as blue spectrum is still required on flowering , yet the original purpose was to complement mid to low branch development) in this shitty set up bonding with the upper bulbs and their colour temperature schema, every light has it's own schedule as how i suppose is a morning to night as something that cause plant resistance response (kinda noticed something i need to stimulate as i see a bit of fox-tailing but now with the uv-a i propose to build resistance and activate defense mechanisms like resin and of course, plant morphology according to its stage making bulkier , tankier , according to outdoor’s atmosphere i want to replicate as optimal weather as well – i hope this hardship make them more resilient and increase their health points as here i’s a HOT GIRL SUMMER- even indoors it rises my base temperature makes smell notorious, but as is not the usual weed smell make it and advantage in terms of discretion Killer Kush presents slight sweet tones not very prominent, the only herbal smell can be associated to pine undermining the refined coffee-like smell that is the dominant note (this selection of kush lack of lemon notes up to this point i can say it’s earthy with a bit of sour & sweetness) . Alas, as their late flowering phase and feeding schema should make chunky girls ,but the hot girl summer can become really a issue here, days and heat is something to be deal and prevent more light and food that they can chew , and this timing make me not over-do this niggas with excess of light, heat, disbalanced spectrum or extractions. So automatizing it with some timers ( a very good hint to repurpose old shit in your house!) im doing a Schedule that turn off some lights through the course of the day switching the intensity and the spectrum itself , making a sweet morning to afternoon look alike , , making that timer looks really like a basement like a nice dream to my plants, not exposing them to very disfavourable conditions and yet controlling my electric bill peaking , by the same reason , ventilation is also measured as im relying just on ventilators to distribute and disperse heat and also doing the role of intraction / extractors, there are 9 usb fans in various levels of this weed maze <3 . It's noticeable the quick evolution of these plants as there is no other factors to be aware except heat management as plants seem with not negative traces except some burnt leaf from previous weeks so i expect that they should be ready at the end of the month by my a personal mania of ripping shit all at once in order all to have that space at disposition for new projets , i will report stability eventually as they seemed quite rare enough when before putting to flower all, there was one already flowering AND THAT WAS FUCK THIS SHIT AND BECAUSE ITS NO CHEAP BULK TO EXPECT THIS SHIT!** ), and that shit become tears in the rain as that put me in some shit i can’t control or overcome, and just deal with in this strange lst bondage metal succubus nightmare that will be a nightmare to unmount too. Yet, i want the best conditions for her as all plants except her are ok so now the lateral bulbs also switched to give her more light (there is one on the left, right and on the back side, but i think better results with a neutral colour and using t5 led tubes with a water resistant case in each corner of the tent if i try to re do lateral lights ! ) *I still own the panels, in a next future, but not in this run i can use them as i think how i can supplement them and make them a team player as beyonding spectrum shaman shit i know now , and thankful to the chinese kids that made these fucking cheap as hell blessed bulbs,as they made me allow quickly adapt the spectrum on the main setup is 3000-4000k at the same ratio, with the addition of a cold light of 6500k on the idea of middle branching development too , and a small pint of unholy uv doing early 2000s cyberpunk shit with old trash janitor with compulsive hoarding stuff with some big gas leaks attitude niggas . **I do second runs of plants in order reach a better result through practice - but is noticeable the lack of stability on these bastards as i was very happy with previous strains i can say this strain is a big no! , unlike their famous ones, like black Jack or sweet cheese , the former ones fast version are way more stable and they didn’t presented me autoflowering phenos in the batch … i don’t hate autos, but i hate to mix them with feminized on the same run, its like having a hermaphrodite indoors for me. 😫😫😫

Día 57 (16/12) CBD Auto 20:1 #1 ha empezado a bajar el consumo de agua... pero sigue creciendo! ¿Tendrá fin el stretch de esta planta? CBD Auto 20:1 #2 empieza a perder hojas por senescencia. Está a punto de cosecha!?!?!?! LSD-25 Auto está increiblemente dura y brillante. Un color morado oscuro casi negro OG Kush Auto ha bajado un poco el consumo de agua, pero empieza a formar unos cogollos monstruosos, completamente cubiertos de resina+ Día 58 (17/12) CBD Auto 20:1 #1 empieza a tocar la lampara! Vuelvo a subir la lampara.... Además presenta una ligera coloración morada en las puntas de las hojas... ¿Coloración natural o deficiencia de P? CBD Auto 20:1 #2 tiene un montón de hojas con senescencia acelerada de un dia para otro! Ha llegado el día de la cosecha! 😍💥 LSD-25 Auto sigue acercandose al final... todos los cogollos son duros como pelotas de golf 💥 OG Kush Auto estaba practicamente seca! Vuelvo a darle 1250 ml de H2O RO. Va a hacer unos cogollos brutales Día 59 (18/12) CBD Auto 20:1 #1 - empieza a mostrar coloración morada en las puntas de las hojas ¿Genetica o deficiencia? Aprovecho el riego con BIO PK 5-8 10 ml/L y darle un booster! LSD-25 Auto - se acerca la cosecha! 😍💥 Cogollos duros como piedras en todas partes y bajando el consumo de agua... OG Kush Auto - muestra más avanzada a deficiencia de hace unos dias, de modo riego con BIO PK 5-8 10 ml/L. A ver como le sienta! Día 60 (19/12) CBD Auto 20:1 #1 - sigue mostrando más deficiencia de P con alguna mancha en las hojas superiores. Menos mal que ayer la regué con el BIO PK 5-8! LSD-25 Auto - Le miro los tricomas y aún no está lista. 50% trasparentes + 50% nublados. Pero solo faltan días! OG Kush Auto - Está empezando a apilar cogollos de forma brutal, y el olor es una maravilla! Además se muestra sedienta! Eso es buena señal Día 61 (20/12) Busy time Día 62 (21/12) LSD-25 Auto - muy cerca de la cosecha. Apenas consume agua.... Día 63 (22/12) LSD-25 Auto - harvest day! Tricomas mayoría nublado y alguno ambar. Perfecta! 💦Nutrients by Bio Tabs - www.biotabs.nl/en/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae "GDBT420" 15% DISCOUNT code for the BIOTABS Webshop https://biotabs.nl/en/shop/

I will start lst soon :)

jours 5 pour les filles

Plantula 12-11-2024 a 21-11-2024 Semana 1 12-11-2024 Se mantiene en rehidratacion constante y vigilancia ya que son los dias mas vulnerables de la plantula. 15-11-2024 Se coloca por la tarde en el recipiente hidroponico ya que la plantula ya tiene la madurez necesaria, y se colocan nutrientes en dosis muy baja. 16-11-2024 Primer Contacto de raizes en agua. 18-11-2024 Se nota la evolucion radicular de la planta y se observa mejoria. Parametros Utilizados Temperatura del ambiente 24 C° Extraccion de aire 4 pulgadas Humedad 75% a 90% Potencia de la lampara 50% Ec Original 0.4 Ec Nutriente 1.0 Ph 6.5

Familia, estoy convencido de que esta variedad va a predominar del resto 🙈. No ahora en serio una gran variedad para cultivadores novatos, puedes plantarlas directamente a maceta y no se espigarán 3/3 comprobado. Parece muy sencilla de cultivar, controlamos ph , temperatura y humedad que estén en sus respectivos valores. Se ven bastante sanas, pronto tocará hacer algún trasplante iremos viendo próximamente

2508-defoliated some inward lookers 2608-Added 20L Nutrient Sol.+1L O.Water. guess hope yall like the pics and 2 vids this week. PS: i still got not clue which strain is which, the look alike till now?

Reducing water to 5l every 3-4 days. Glookies just builds leaves and little bud but alot of trichomes...

welcome to 📅 Day 50 : flower 5/3/2021. not to happy with the deficiency problems I'm having but she is growing well still. I will be dropping the amount of nutes to 1 mil a L from 2ml a L but leaving the cal mag the same. I'm very happy with the MH TS 1000💡 and they plant also seams to agree update 📅Day 52 : flower 5/5/2021 Not to much change it the problems yet but I have noticed she is getting fatter under the Mars Hydro TS 1000 she is loving the 💡 and I am too so lets see how she does.

Più alta e magra di tutte...da vedere l fioritura ma molto molto bella !!!

Buds Getting bigger and full off trichoms 😍😍 And smells fantastic 🤤🤤🤤

This week has been great! 😁 Everything is going well... I really want to thank the GD Community for helping my first grow go so well. 🙏 Fingers crossed we can cruise to the finish line without any issues. Happy Growing! 💚💪🌱😎🌱💪💚