Processing
Likes
Comments
Share
Hello growers This week was a good week. The plants are still growing good. Good color. Happy. In a week i will switch! See you
Likes
8
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 96g !! For the light i’ve used the Spider Farmer SE-7000💡
Likes
29
Share
Anche lei è l'ultima settimana di lavaggio radici.......oggi 29/09/2024 taglio questa Ayahuasca purple...ha un profumo fortissimo.... Oggi probabilmente inizierò a pulire tt le cime e poi.via un taglio netto 😂🤣😜👍💪
Likes
10
Share
6/19/2024 this plant is short and stinky as fuck even as a cutting. Excited for this next run I'm doing. The last clones from this nursery, were the rs11 and purple octane and those were phenomenal. Let's see where this goes yall 6/25 been staring at her trying to envision how to go about training or topping. She's short and the lower branches are fairly prominent and reaching close to main stem. I will probably Top her after she starts growing regularly and gives me some more to work with.
Likes
22
Share
Day 79: Watered the gorilla cookies with 1.5L with nuts 1481 ppm, 3151 us/cm, 3.1 EC (last week before flush)(same feeding as last week on the diary) 283 ppm, 591 us/cm 0.5 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Harvested 2 purple punch Day 82: Watered the gorilla cookies with 1.5L with nuts 1605 ppm, 3414 us/cm, 3.4 EC (last week before flush)(last feeding with nuts) 268 ppm, 561 us/cm 0.5 EC (3 strawberry banana, 3 purple punch and 3 wedding Cheesecake) (2L each) Day 84: Watered all the plants with 2L each 259 ppm, 551 us/cm 0.5 EC Day 86: Watered all the plants with 2L each 272 ppm, 578 us/cm 0.5 EC
Likes
36
Share
Plant is on its 24th day. Started seeing the tips of the plant become lightened. So I pulled the lights back to 25 inches in case it was the cause.
Likes
14
Share
@Kirsten
Follow
I took everything out of the tent and disinfected it again. The pots have made the tent base into a ball 😅 The velcro tags fell off long ago. I decided to put some new ones on. I have some wider velcro that I would've preferred to use, I have misplaced those. Anyway, these will have to do. I also made some large pot markers to velcro to the pots, too. I figured it would be easier to recognise the plants in photos if I made some. I laminated them, then attached the velcro to the pots and pot markers. [I get bored] 😅 make everything as fun as possible 💚 I ended up finding some sticky back velcro rolls. Of course, there's no way that it would stick to a slippery surface that gets wet from humidity. So, I used my glue gun and added strips to each side of the tent liner and tent walls to hold ot in place. The 8 gallon pots are very heavy after being watered, and the liner has suffered. Hopefully, this will work to keep it in place, at least for a while! 😅 7.5.25: I also had to clean my pots, as you can see in the photos (if you want, lol). They had got very mouldy/mildewy/fungussy. 🤢 also the under side of the tent liner. So it was very lucky that I decided to clean it at this point. Or else I could have serious issues. I'll look into the ventilation as I'm not exhausting the tent because I leave the door open with very strong airflow. I did spray the plants with Trace, and I used a lot of it. So, that probably ran down the walls into the base of the tent before it dried 🤔 that could have easily caused it. I'll have to make sure I dry off the walls after I use it next time. I certainly don't want to keep cleaning everything. The plants are delicate, and unfortunately, however I try, it appears I am not. I'm always snapping branches off by just watering, let alone removing them from the tent to clean! 😅 you can imagine. Accidental defoliation? 😉 I also cleaned the light, but I have noticed on one light that there are brown spots, which won't come off without damaging the LED's. I really don't want to have to buy a new light. The par isn't great for full flowering. I just can't justify buying a new one right now, as I've already bought 2 in a year. The light has been turned up to 100%, gradually, over the course of a few days. It has been fairly warm so I moved them further away too, as i don't want them to get heat stress, as I have already noticed a few leaves canoeing and having a taco on my dime! 🤨🤔😅 I'll continue to monitor and adjust again when possible/necessary. 9.5.25: Hulkberry has certainly started her stretch! I'm really low on space to train her out, and the light has been turned up to full power. She has begun to drink more, and I gave some more dechlorinated water PH'd to 6.4 with ♡ 1/4 tsp of Greenleaf nutrients Sea K(elp). PPM: 800 PH:6.4 I am very pleased with the recent growth spurt, so let's hope I can accommodate her! 😅 9.5.25: It's a necessity to keep the soil moist. That means I need to water more often now. Today I watered with 1.5 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 1/5 tsp of Sea K(elp). By Greenleaf nutrients ♡ 1/4 tsp Ecothrive Biosys. PPM: 564 PH: 6.4 12.5.25: Hulkberry was very dry, surprisingly. Although I guess I've been giving her less. She was fed with a high dose of Ecothrive Trace: 7ml/7l. She was fed with 6 litres over the course of the day. PH:6.4 PPM: 515 I had added this as a foliar spray last week, and it has apparently damaged some leaves. Left some dry orange patches in the leaves. So, having that happen makes me want to just water with it. Thanks for checking out my diary and hanging out 💚 ✌️ 🍃 😊 🌱
Likes
25
Share
@SybDarret
Follow
They are 46 and 60.5 cm Both of them look pretty, each one is different from the other but they are beautiful 😍 Taller keeps beeing full of pistils, and the smallers that have green buds almost without pistils now is developing some kind of purple color on her leaves. They have a strong sweet and critric smell, the strongest among my plants. Watered yesterday with nutrients, i'm not sure if keep feeding them or not. I guess if i give them one more week (maybe cut them on feb 11) their colas may gain some weight, specially lower buds. Added a video of each plant, i hope you enjoy 😺
Processing
Likes
27
Share
@Piquillo
Follow
Seeds look healthy and have been planted in small cups after being successfully germinated. I'll pick two out of three. I'm still calibrating this setup, but so far it can easily maintain 25 - 26° C when lights on and around 20° C off. ----------------------------------------------------------------------------- RUNTZ (ZAMNESIA SEEDS) FEMINIZED DATA SHEET Brand Zamnesia Seeds Genetics 50% Indica / 50% Sativa Parents Gelato x Zkittlez Flowering Time 8-9 weeks THC 27% CBD <1% Yield (Indoor) 450-500 gr/m² Yield (Outdoor) 400-450 gr/plant Height (Indoor) 130cm Height (Outdoor) 180cm Available as Feminized seeds Flowering Type Photoperiod Sex Feminized
Likes
1
Share
Smooth sailing just add water soil has made this run easy she’s frosty up nicely and buds are looking great
Likes
52
Share
You don't become confident by shouting affirmations in the mirror, but by having a stack of undeniable proof that you are who you say you are, outwork your self-doubt. Nitrogen fixation is a chemical process by which molecular nitrogen (N2), which has a strong triple covalent bond, is converted into ammonia (NH3) or related nitrogenous compounds, typically in soil or aquatic systems but also in industry. The nitrogen in air is molecular dinitrogen, a relatively nonreactive molecule that is metabolically useless to all but a few microorganisms. Biological nitrogen fixation or diazotrophy is an important microbe-mediated process that converts dinitrogen (N2) gas to ammonia (NH3) using the nitrogenase protein complex (Nif).[2][3] Nitrogen fixation is essential to life because fixed inorganic nitrogen compounds are required for the biosynthesis of all nitrogen-containing organic compounds, such as amino acids and proteins, nucleoside triphosphates and nucleic acids. As part of the nitrogen cycle, it is essential for agriculture and the manufacture of fertilizer. It is also, indirectly, relevant to the manufacture of all nitrogen chemical compounds, which include some explosives, pharmaceuticals, and dyes. Nitrogen fixation is carried out naturally in soil by microorganisms termed diazotrophs that include bacteria, such as Azotobacter, and archaea. Some nitrogen-fixing bacteria have symbiotic relationships with plant groups, especially legumes.[4] Looser non-symbiotic relationships between diazotrophs and plants are often referred to as associative, as seen in nitrogen fixation on rice roots. Nitrogen fixation occurs between some termites and fungi.[5] It occurs naturally in the air by means of NOx production by lightning.[6][7] All biological reactions involving the process of nitrogen fixation are catalyzed by enzymes called nitrogenases.[8] These enzymes contain iron, often with a second metal, usually molybdenum but sometimes vanadium. Green clover (Fixation) White clover (Fixation) Red Clover. (Fixation) Yellow Clover. (Fixation, deeper roots) Sweet Thai Basil. (Terpenes) Italian Basil. (Terpenes) Chamomile.(Oil production) Borage.(Pest attraction taste) Lavender.(Pest attraction smell) Marigold(Pest attraction visual) Mycorrhizae are beneficial associations between mycorrhizal fungi and a plant’s root system. Mycorrhizal fungi spores germinate in the soil, creating filaments (hyphae) that penetrate the root cells, thus establishing a symbiotic relationship. This collaboration leads to the development of both intra-radical and extra-radical networks of filaments, enabling efficient exploration of the soil for enhanced access to nutrients and water. Consequently, these vital resources are transferred to the plant, resulting in numerous benefits for crop cultivation. Various mycorrhizal products are available in diverse formulations (powder, granular, and liquid), concentrations, and qualities. Ongoing advancements in products, technologies, and research are reshaping our understanding of mycorrhizae. Despite these positive developments, certain misconceptions persist. In the following discussion, we aim to clarify the truths and dispel the myths surrounding mycorrhizae products. MYTH #1 A HIGHER NUMBER OF MYCORRHIZAE SPECIES MEANS BETTER RESULTS. Contrary to common belief, having a higher number of mycorrhizae species in a product does not translate to better results; in fact, it often yields the opposite outcome. A plant can sustain only one association with a particular mycorrhizal fungi species. Introducing multiple species creates competition among them, which is not advantageous for the plant. The initial colonizer does not ensure the highest success; instead, it gains precedence. It is recommended to select a product with a concentrated presence of a single mycorrhizae species known for its effective performance, rather than opting for a product with multiple species at lower concentrations. MYTH #2 ECTOMYCORRHIZAE ARE EFFECTIVE FOR CANNABIS PLANTS. Although ectomycorrhizae can colonize five to ten percent of plant species, cannabis is not among them. Ectomycorrhizae do not penetrate the root cells; instead, they develop around the roots and on the exterior. For cannabis plants, it is essential to seek out endomycorrhizae. Endomycorrhizae are capable of colonizing 70% to 90% of plant species, including cannabis. Unlike ectomycorrhizae, endomycorrhizae penetrate the root cells, forming structures like arbuscules for the exchange of nutrients and water with the plant. MYTH #3 WHOLE INOCULANT (PROPAGULES) PERFORM BETTER THAN ONLY VIABLE SPORES. The propagule count specified on most mycorrhizae products indicates the presence of spores (viable and unviable), hyphae, and root fragments. However, it is crucial to note that only viable spores, those with the capacity to germinate, can successfully colonize a plant’s root system. Spores are to mycorrhizal fungi what seeds are to cannabis plants—a fundamental component enabling fungi reproduction. Consequently, even if a mycorrhizal product boasts millions of propagules, its effectiveness hinges on the presence of viable spores. Without viable spores, the product will not contribute to plant development. Therefore, the genuine value of a mycorrhizal inoculant lies in the quantity of viable spores it contains, as only viable spores can efficiently initiate symbiosis. MYTH #4 ALL METHODS OF APPLICATION YIELD IDENTICAL RESULTS. To establish the symbiosis, mycorrhizal fungi spores must be close to the plant roots. The optimal recommendation is to directly apply mycorrhizal inoculant to the roots, either in powder, granular or slurry form. This method ensures maximum proximity between the spores and the roots, facilitating a rapid establishment of symbiosis. Particularly with crops like cannabis, which have a short growing cycle, employing this technique is the most effective way to obtain optimal benefits. Alternatively, techniques such as blending the inoculant with the soil are effective, but there may be a delay in the establishment of symbiosis. This is because the roots need to grow and come into contact with the dispersed spores throughout the growing media. MYTH #5 MYCORRHIZAE CAN ONLY BE GROWN ON LIVING PLANTS. While the predominant method for commercially producing mycorrhizae involves growing them on the root systems of living plants (in vivo production), it is not the exclusive nor the optimal technique. In fact, this production approach has notable drawbacks that the “root organ culture” method just does not have (in vitro production). In vitro production occurs in meticulously controlled, aseptic laboratory conditions, allowing for the consistent generation of products that are viable, highly concentrated, species-specific, and free from pathogens. Achieving such precision and quality is impossible when relying on the cultivation of mycorrhizal fungi on plants exposed to external conditions. In conclusion, it is crucial to take all these factors into consideration when choosing the appropriate product for your crop to fully harness the wide array of benefits provided by a high-quality mycorrhizal product. STRONGER PLANT – Stress resistance. FASTER GROWTH – Improve plant structure and shorter veg time. INCREASE YIELD – Overall more biomass. IMPROVED QUALITY – Increase cannabinoids and terpenes content.
Likes
68
Share
@Hawkbo
Follow
5x9 everything is still the same for the most part, been running the system 4 times a day for 7-9 mins at a time manually until my auto ph doser gets here then I will have them on a timer for more frequent but shorter feedings. The 4x8 is starting to get goin a little bit I put the trellis in last night and did some super cropping and weaving. Also installed the drip system yesterday on the 4x8 but still hand feeding for another day or 2. The calmag cut off seems to be fine for them See my ig posts for discount codes for floraflex, gorilla grow tent, rain science grow bags and growlightscience.led
Likes
4
Share
@eYo4Terpz
Follow
Stretch ist jetzt im vollem gange Bei der Jehova auch schon beinahe zusende Die Acid Snow ist jetzt dabei. Die Pflanzen sehen alle aus als wären sie getoppt worden. Wurde aber keine!!!!
Likes
16
Share
@GYOweed
Follow
I think the emerson effect far red led light strip worked too well I never seen sativas look ready at 6 weeks lol.
Likes
8
Share
Que pasa familia, vamos con la décima y última semana de floración de estas Zkittelz de Seeds Mafia. La humedad está entorno al 50%, y la temperatura la tengo entre los 22/24 grados. Controlamos en ph en cada riego a 6.2. Y el agua que utilizo de riego suele estar estancada entre 24 / 36 horas. Hasta aquí todo bien, las flores ya están maduras y ya es hora de cosechar. Las flores se ven compactas y bie. Resinosas, dejaré secar una o dos semanas y actualizaremos la smoke review. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
10
Share
Things are looking good. Couple of the plants are getting an awesome purple tint. Beautiful plants honestly glad that I just let them grow. Harvest is going to be a handful for sure but whatever it’ll be worth it. Still got a good month at minimum but excited to see what the week to week progress is the next few. Loving all the colors. Thanks for stopping by and as always 🍻
Likes
3
Share
She's doing so well today with her last feed . Gave her 5ml off micro boost from living Soils.
Processing
Likes
14
Share
@DonPato
Follow
Fin de la semana siete y soló veo un proceso hermoso, lleno de gratificación, sin hojas quemadas ni exceso de nutrientes, todo se ha dado en las dosis justas de cada componente, los nutrientes orgánicos funcionan de maravilla. Creó que las palabras están demás después del registro gráfico. Saludos a todos! Don Pato. ___________________________________________ End of week seven and alone I see a beautiful process, full of gratification, without burnt leaves or excess nutrients, everything has been given in the right doses of each component, organic nutrients work great. He thought the words are there after the graphic record. Big Hugs ! Don Pato.
Likes
19
Share
growing this strain was super easy, but for some reason i had 5 seeds and i wanted to germinate another 2 and i followed the germination process 420 fast buds has on the web and unfortunately from 5 seeds just 1 germinated. which you can see in this diary. the buds are really fat and they smell super fruity and they get you really high lol