GTH SEED #1 in training, just super cropped on one side to even conopy. The first site im recording will be a clone,it is on back side of plant and will not produce. #2,#3,#4 pics,#2 is stripped of leaves at about 12 inches. 06/16/18 #4 is showing pre-flowers,#2,#3, no sign yet. #1 check in the morning. 06/19/2018 Still no pre -flowers on #1,#2,#3, #4 however is female so I Fimmed her to encourage side shoots to grow biggest of wider canopy. #1 reacting well to supercropping 20 tops as of today. Praying she is female🙏🙏. She is a stretchy girl in flower 2 to 3 x her vegged height so trying to be low profile as possible.👍

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D70/B08 - 24/01/24 ⚗️ 🌡️ 🌊 🍗 💼 🧠 pH is finally stable on the lower side (hopefully) 🚀 The Tent-X is on its way, I can't wait to get it.. 🎬 Added Timelapse video ________________________________ 📅 D71/B09 - 25/01/24 ⚗️ EC: 1.2 pH: 5.6 🌡️ T: 23 °C H: 45% 🌊 🍗 💧 💼 I put T-H Sensor of TrolMaster on the SCroG net 🧠 🚀Tent-X from TrolMaster received, I'm going to set it up tomorrow 🎬 Added Timelapse video ________________________________ 📅 D72/B10 - 26/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 23 °C H: 40% 🌊 Added 6L 🍗 Added Bloom A-B - CalMag - Big Bud - Bud Candy - B52 💼 Tent-X set up done ! 🧠 It works perfectly and as I just see so far, from now on, I'm going to experiment a new way to grow ! 🚀 🎬 Added Timelapse video and Set-Up videos and pics ________________________________ 📅 D73/B11 - 27/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 40% 🌊 🍗 💧 Added a little of pH- 💼 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D74/B12 - 28/01/24 ⚗️ EC: 1 pH: 5.5 🌡️ T: 23 °C H: 35% 🌊 Added 4L 🍗 Added CalMag - Bloom A-B - B52 - Bud Candy - Big Bud 💧 Added some pH- 💼 🧠 🚀 🎬 Added Timelapse video and 4 pics ________________________________ 📅 D75/B13 - 29/01/24 ⚗️ EC: 1 pH: 6.0 🌡️ T: 23 °C H: 50% 🌊 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and "TM+ Pro" App screenshots. This is the app used to monotoring the Tent-X controller ________________________________ 📅 D76/B14 - 30/01/24 ⚗️ EC: 1.2 pH 6.1 🌡️ T: 18-26 °C H: 30-55% (from now on, I'll put the Min-Max values of T-H as I can easily read them from the app.) 🌊 4L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 I added a Humidifier as the H falls down to 30% 🧠 With the help of Humidifier, according with "TM+ Pro" app, I got the perfect VPD (Vapor Pressure Deficit) rate !! (see screenshots) 🚀 I have to face a very low rate humidity of the external enviroment 🎬 Added Timelapse video and T-H values daily graph, and perfect VPD from the Tent-X controller ________________________________

Flowering in full effect...still no need for watering because of rain...found some molasses so it a sweet treat today.

Hello! Everything same, buds don't grow anymore vut they become Tighter. I am gonna cut her off these days!

3 in the 1 gallons are starting to take shape and swell a little bit. I like growin autos in little pots.

Mais uma semana sem espaço e o desespero bateu...

Hallo, Banana Dessert, Weltexklusiv zuallererst hier auf Growdiaries! (lul, ziemlich cool das zu schreiben... Vor allem wenn es stimmt. Deswegen mach ichs auch) 02.08 Tag46/ Blüte 11 Noch immer ein Augen schmauß. So blüte nicht wirklich(noch nicht). Ich versuche es euch mit nem Video zu zeigen. Revidiere. Die Blüte geht los. 03.08. Stretch. Recht wenig Dünger, ist aber mit Absicht. Soll so gegrowed werden. Und alle Pflanzen reagieren äußerst positiv darauf. Auch andere. 04.08. Stretch. Danke, es reicht... 05.08. Tag 49. Blüte 14. Prächtig. Beide mit Verlaub gesagt. Riecht nach trockenem Heu. Seltsam.

She is much prettier than she was a week ago :) I remembered that I have my first grow light, which is more compact and it will give me more space, so I changed my light, now the girl's side branches get light too:) I add a lot of video memes, because I really want to win Iphone16 pro ;) and those who don't take risks don't drink champagne:) good luck to everyone.

She only grew 8cm this week. The stretch is slowing down a lot now. She's doing well. Nothing else to the report as I'm just letting her do her own thing. Still loving her Sativa-like leaves!! 😍 They are as thin as a blade! For nutrients I'm using 15g of 20-20-20 powder mixed with 10L of water. Also added 4ml/L of both Cannazym and Terpinator. This brings it to around 1600ppm including ~300ppm for my clean water. Timelapse Sequence: *** Blue Dream *** Auto Jack Pineapple Express CBD Compassion *** BLue Dream *** Auto Jack Pineapple Express CBD Compassion

She's almost ready, I,m thinking that in two weeks Iwill cut. Lets see..

right now I'm just waiting on some pollen sacks and some pollen but other than that plant looks healthy as we can see and I also changed my lights and my schedule to 12/12 . Feeding big bloom and tiger bloom with a lil secret ingredient and lots of bat poo noticed a seed think we talked about that before looks like imma plant this seed if my pollen sacks don't kick in on time which time is almost up.al I'm also waiting on my crystal to start forming I see it coming In but has a few weeks to fully brighten up the night recording

With the last heat wave, I had an answer to one of my questions, clearly my chiller is not doing the trick. I have water temperatures that went up to 27°, which is way too much, the plants deprived of oxygen, started to declare several deficiencies due to an assimilation slowed by the lack of oxygen. It is then that a nasty fungus came to say bijour, it is me MR pythium! It was necessary to act, at the risk of having to restart the culture. So I applied hydrogen peroxide and ROOT ROT X, and both products are doing harm to this nasty pythium, things are now back to normal. On the other hand, the plants had a decreased growth for 10 to 15 days, so I'm going to extend my growth for 10 to 20 days, that is to say 1 or 2 soups, I'll choose according to the root development of the plants. Before going to flowering, I have to catch up this delay in order to make a nice crop.

02.11.'24 After 5 days of drying, this little girl who was a little bigger than a meter gave 950 grams and a little bit of popcorn...this picking was 870 and a little bit of popcorn, and 4-5 weeks ago during a storm, one branch broke, which yielded about 100, but let's say 80 for sure, a total of 950 grams of beautiful, huge, potent buds

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.