The Grow Awards 2026 🏆
Likes
Comments
Share
Aug 17: Auto Overdose is a nice plant but it’s not an auto. I started this one late and only topped it once thinking it was an auto. Other growers have noticed it isn’t an auto too, so I forced it in the dark garage. Flowering has to be started by the end of July here or it won’t finish in the fall. The flowers are forming quickly and I suspect this is actually Overdose Fast. So far so good, and good genetics for a Fast plant. Aug 18: no UV light today unfortunately but it was decently sunny. Scrog net certainly seems like a good idea. This plant is asymmetrical because I broke one of the two main stems a couple weeks after topping. This changed the shape of the plant so it’s become one-sided as if I was growing it up against a wall. Lots of nice lower branches came up so she looks pretty good now.
Likes
119
Share
I love growing and i love the GD community, we are like a big canna family and its a pleasure and an honor to be part of this all. Thank you all for being here , for growing and believing in this beautiful healing plant . Growers love to you all
Likes
6
Share
@Reidy_B
Follow
So far my confidence in this next go around is very high! 😃☀️ Putting the seeds straight into a jiffy pellet is the way I am going to proceed with germination going forward. You are just adding extra variables to what should be a simple equation (seed in sterile medium + warmth + moisture = seedling) unlike with the paper towel method, where you need to transfer them to the medium. But this is just one opinion of a rookie grower.
Likes
16
Share
@DonKrika
Follow
I still have problems with high levels of humidity, but I discovered that if I open the window of the room to let fresh air in I can reduce the humidity in the air. This week I introduced molasses in the water, I used 1 tablespoon for every 4L of water. From now on I will only use nutes and molasses. The buds are not huge, but they are full of trichomes. I saw a bit of nutrient burn on a few leaves, nothing to worry about, I guess PPM around 2000 is a bit too much for this strain. DAY 108 PH - 6.01 Solution Temp - 17.3 PPM-2150 Watering Volume per plant - 4L DAY 112 - Molasses PH - 6 Solution Temp - 19 PPM-610 Watering Volume per plant - 4L
Likes
6
Share
-start of flushing as i see around 50% milky and i want to chop at high THC. Iv spotted 1-2 amber also so in 1 week from now probably there will be 10-20% amber . what do you think?
Likes
3
Share
@LAShugars
Follow
So excited to see how FastBuds Photos do
Likes
33
Share
c'est bien jolie
Likes
8
Share
🌱 Week 2 – Vegetative Growth 09/27: Started the day noticing chlorosis on some leaves. The pattern matches an iron deficiency: interveinal chlorosis mainly on the newer leaves. After checking, this seems to be caused by a nutrient lockout, consistent with the high substrate pH since the beginning of the grow. Lesson learned for next time. Performed a heavy flush with 20 L of water per plant. Runoff dropped from EC 1200 → 500 and pH 7.1 → 6.7. From now on, I’ll water with enough solution to get ~20% runoff each time instead of just ~250 ml. Will also lower input pH to 5.6–5.7 to gradually bring substrate pH down into range. Noticed that some plants have started to give off a light smell 🌿. 09/28: Each plant watered with 1 L at pH 5.6, EC 950. Solution included 3 ml/L CalMag + 0.8 ml/L Coco A + 0.8 ml/L Coco B + 1 ml/L Deeper Underground. Runoff EC not measured (since heavy flush was done yesterday). Runoff pH still unchanged, same as yesterday (~6.7). Yesterday I lowered the light, today increased it back to 13.5k lux. Chlorosis is still advancing, hoping successive irrigations will help bring substrate pH down. 09/29: Watered again but with 500ml this time. Solution (same recipe as yesterday) at pH 5.6. Surprisingly, runoff pH rose higher than yesterday, now at 7.0, with EC 700. Light intensity increased to 14.5k lux. 09/30: Watered with 500 ml at pH 5.6, EC 1050. Solution included 3 ml/L CalMag (new bottle — seems to add more EC than the old one) + 1 ml/L Coco A + 1 ml/L Coco B + 1 ml/L Deeper Underground. Runoff measured EC 700–800, pH 7.0. Since the flush, stems have thickened significantly 💪. 10/01: Watered with 1 L at pH 5.6, EC 1200. Solution included 2.5 ml/L CalMag + 1 ml/L Coco A + 1 ml/L Coco B + 1 ml/L Deeper Underground. Runoff measured EC 650, pH 7.0. Substrate pH still not dropping, but plants are growing at a good pace. Only two plants continue to show chlorosis, while all show a noticeable thickening of stems this week. 10/02: Significant vertical growth observed — most plants stretched about 8 cm in the last 3 days. Watered again with the same solution as yesterday, but only 500 ml per plant. Input pH 5.6, runoff pH still at 7.0, EC 600–700. Chlorosis persists, and on one plant with symptoms, small brown spots appeared, suggesting a possible manganese deficiency. Also noticed what look like early pre-flowers (tiny pistils) on two plants, though it feels early for day 20. 10/03: Watered with the same solution as previous days (pH 5.6, EC 1200). Runoff remained stable at pH 7.0, EC ~600–700. Based on uptake, I plan to progressively raise input EC until EC in ≈ EC out. Gradually increasing VPD range, target for Week 3 is 1.0–1.2 kPa. --- 📝 Week 2 Summary 🚩 Main challenge: persistent high runoff pH (~7.0) causing chlorosis, initially resembling iron deficiency but later showing signs closer to manganese deficiency (brown spotting). Heavy flush reduced EC, but pH correction is progressing slowly. Plants responded with strong stem thickening and rapid vertical growth (+8 cm in 3 days). Aroma starting to appear on some plants 🌿. ⚡ Light stabilized around 14–15k lux, with adjustments to avoid stress. 🌱 Despite issues, most plants are vigorous, only 2 showing stronger deficiency symptoms. ➡️ Plan for Week 3 Irrigation: Increase input EC gradually until it balances with runoff (~EC in = EC out). Maintain runoff at ~20% each watering. pH management: Keep input pH at 5.6–5.7 to push substrate down from current ~7.0. VPD: Raise target range to 1.0–1.2 kPa for optimal transpiration. Light: Hold intensity ~14.5k lux, slight increases only if no stress observed. Monitoring: Track chlorosis spots closely — see if new growth improves once substrate stabilizes. Pre-flowers: Keep observing possible pistils.
Likes
39
Share
This week was abit easy... Only thing that was really necessary was ensuring that the temperature and Humidity were/is/currently stable.. Without any significant in/decreases 😕.. Gave her a lil extra H20 because she is getting really hungry recently..
Likes
4
Share
Week 11 for 9lb Hammer F2, Still on my list of least favourites in my garden 😂 They probably get the least attention in the garden too, they both got quite burnt from the sun this week compared to the rest, so not too heat resistant that's for sure. 😐
Likes
19
Share
@Chubbs
Follow
420Fastbuds TrainWreckAuto Week 9 What up grow fam. Weekly update for these lovely girls. They're getting really close to being done. The flowers are swelling up great with sweet smells coming off them. Trichs are starting to turn cloudy so I'll keep an eye and check them out later in the week. All in all very Happy Growing
Likes
21
Share
Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
6
Share
1st week of flowering over. Trim at the end of this week to redirect energy again and then we'll
Likes
327
Share
@FoTwenny
Follow
•••••••••••••••••••••••••• Oct. 26 - Nov. 1 •••••••••••••••••••••••••• •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• WEEKLY SUMMARY: •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 🙋‍♀️Fo' Twenny here!🙋‍♀️ Back with another update on our 16 STRAIN SOG! Each plant pictured here is documented in it's own individual diariy. This is just the "highlight reel" of the overall garden. Want more information on grow techniques, medium, equipment, feed, etc??? It's all in those individual diaries. Go check them out and maybe drop me some likes and comments while you're there! I always love hearing from y'all! 😉 Any advice, suggestions, or constructive criticisms are always welcome. •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Want to see more details on the cultivars I have growing❓ Please, be sure to check out individual plant diaries & give me a follow! 👍👍 🙏 Thank you for stopping by my garden! 🙏 Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 Happy farmin' my friends! ☺️🌱 - Fo' Twenny 👩‍🌾🏻
Likes
3
Share
@DE_BW
Follow
Last week. She is an absolute beast! Can‘t wait to harvest her. D79: 2l with Flawless Finish. Harvest is in two days D81: Harvest. Will update in a week
Likes
6
Share
Likes
3
Share
She is looking good haven’t watered in a while as the continuous rain helped. I’m doping she can gain more height in the next 2 weeks as I intend to flower her into the dry season.
Likes
30
Share
week intel: every thing is good girls are growing and in the same time blooming . stresses : no stress feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 700 ppm - 1.4 e.c to cause a little stress. day 3 : i feed them normal dose with Bud ignitor + B-52 around 380 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max around 143 ppm - 0.3 e.c to let them recover the stresses to get ready for another stress next week. guide of the week: remember never feed them plain water besides the first week of germination always feed water with nutrients to feed them right p.h every time and to avoid excess water problems, and let them eat the previous meal for 24 hours and dry the soil, so at total only feeding nutrients 3 times a week other days let them dry and rest
Likes
5
Share
She is growing nicely and she has been really easy to grow. The only problem I have been having is humidity issues off and on bc of the weather but I added an extra inline fan. The buds are coming in and im just making sure they fill the scrog out.