Likes
150
Share
@Ferenc
Follow
Day 59, 1st of October 2020: She quiclky reactod to the Topping.... i topped her 14x 14 branches and already growing out rapidly. She is bushy and looking good time to start flowering. I will leave her in 36 hours of darkness before the 9th week ends so on Saturday (todY is thursday) till monday morning. Let's make her flower :) Day 60, 2nd of October 2020: Alright so time has come; she needs to start flowering. Look at her the last 5 pictures (Day 60)📷 before I place her for 54 hours darkness I mean 17:00 o'clock on (today) Friday to 23:00 o'clock on Sunday. Can I count well? so ... 17:00 o'clock to 23:00 o'clock is 6 hours (23:00 o'clock lamp switches on) and next Saturday 23:00 o'clock is 24 hours and one more 24 hours is Sunday 23:00 o'clock 🤪 so 24+24+6 = 54!!!!! Yes!🤪🤪🤪 I have never been good at mathematics 🙃 Okay so I gave her a lot of water and also sprinkled the soil with bat guano before i put her in darkness. I added more nitrogen because she seems to be very hungry for that again and put her to 💤 😴 🛏️. So let's start flowering say goodbye and see you soon 😊 Day 62, 4th of October 2020: Here we go I took her out after 48 hours just to take pictures 📷 Flowering has started so from now the lamp switches on 23:00 o'clock and it works till 11:00 o ⏰ . Let's see how she streches and go crazy :) Photos are uploaded. The nice neon-green tops are appeard like always after leaving them in darkness :)
Likes
5
Share
Harvest time, chopped this lady and she's now drying in the mesh rack. Sticky buds, lots of trichomes. I'll update in 6-7 days with the dry weight and initial smoke report.
Likes
12
Share
Going into the second week of Earyl Veg , Will post pictures around 7pm est, Thing ae going along swimmingly with temperatures around 75-81 , And humidity at around 41-58 percent, im sitting around 1.3 vpd . (Ideally want 0.8-1.1 Vpd. Having an issue with Holding temperatures during its light off state , Tried to close up the tent 5-10 mins before lights off , and turn off humidifier , to hopefully hold temperatures, Will also update this comment, on Temps when light turns back on. May need to add a heater outside the tent's vent to keep temperatures above 65 during Light off. Lights off appears to sit around 67 and 50-70% humid , Lights on Still ranging from 77-81 and 35-50% humid, Added a humidifier to help increase humidity, as well as turned off my Filter/Fan , and just have clip fan as outtake , and one clipped on the Tray blowing towards the ladies
Likes
19
Share
D123 04.05.2025 It‘s „Harvest Day“ stunning contest never expected such a huge plant with so many buds plagron and the zamnesia breed really did there job. Let’s hope the best for the contest more detailed bud images after the dry trim in about 2 weeks D136 Today was dry trim day looks and smells amazing harvested a stunning 69g out of one plant with 100W only in a 2x2 two tent with 2 other plants aside, great job @zamnesia and @plagron
Likes
20
Share
@Hashy
Follow
Week 5 Light cycle=18/6 Light Power=120w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 58% Low Rh= % Rh step=0% Speed max=7 Speed min=1 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.3 DLI aim=28-34 EC aim=1.7 PH aim=6.3 Thur 25/1/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0ml/L Ec=0.25 PH=6.4/6.6 Time start=12.00pm Finish time=13.05pm (7×5 minute runs with 5 minute gaps) Total flow rate=200ml/min Flow rate per plant=50ml/min. Total volume made=12L Total volume left=5.5L Total volume used=6.5L Volume per plant=1.6L (Est) Runoff. Total runoff=0L Ec= PH=/ Did not work properly so need to sort it out. Total flow rate=185ml/min Flow rate per plant=46ml/min. Ran for an extra 15 mins while sorting out system. Should be about 200ml/min now (50ml/min each plant). 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 29) 📋 didn't quite get the amount of water it was supposed to. Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=06.00am Radiator on= below 21c Radiator off= above 22c Humidifier on= not in use. Humidifier off= not in use. Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=00.00am Radiator on= below 18c Radiator off= above 19c Humidifier on= not in use Humidifier off= not in use Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.4 DLI aim=35-40 EC aim=1.9 PH aim=6.2 Fri 26/1/24 #2 (Day 30) 📋 defoliate lower leaves that hardly get any light. Sat 27/1/24 #2 (Day 31) 📋 H=44cm D=38cm DLI=33.5 Raised light about 10cm Increased light power to 140w H=44cm D=47cm DLI=29.5 Sun 28/1/24 I have decided today is going to be the last day of veg before I flip to flower. Lights will have come on today at 6.00am and go off at 10.00pm, they will get 14hrs light today and tomorrow will be day 1 of 12/12. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=Veg nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra grow=4.0ml/L Roots=0.2ml/L Easy Ph down=0.125ml/L Ec= 2.05 PH=6.1/6.3 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=181ml/min Flow rate per plant=45ml/min. Total volume made=12L Total volume left=2L Total volume used=10L Volume per plant=2.5L (Est) Runoff. Total runoff=1L Ec=2.7 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 32) 📋 With no information for flower time I'm going to have to guess she will be finished in 45-60 days. I removed quite a few lower nodes that probably won't break through the canopy, they where ideal candidates for clones. Light cycle=12/12 Light Power=140w 58% Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=8 Speed min=2 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Mon 29/1/24 Lights on at 10.00am off at 22.00pm #2 (Day 33)(Day 1 flower) 📋 H=49cm D=42cm DLI=23.0 At 9.00pm increased light to 150w H=49cm D=42cm DLI=24.0 Tue 30/1/24 #2 (Day 34)(Day 2 flower) 📋 Wed 31/1/24 #2 (Day 35)(Day 3 flower)**** 📋 H=54cm D=37cm DLI=27.0 🚿 foliar sprayed (Sumo Boost 2ml/L). She got flipped into flower on day 32, has caught up to the others in height and even overtook one plant. The cola I stuck back on is a lot shorter then the other 4. Back soon. Take it easy.
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Processing
Likes
15
Share
All is rosey with this lady. No complaints. Defoliated and ready for flower. Not stretched as much as I would have expected but given its my first grow I'm unsure. A ton of tops with hairs showing everywhere. Can't wait to see this lady develop!
Likes
44
Share
With no doubt these plants have not produced much more quantity and density of buds due to the 2 serious mistakes I've made (those who have read the weeks will know what I mean). However, I can say that I am happy with the production obtained given the mistakes made. Between the 2 plants, the one that has produced more and generated the most dense buds has been the Gorilla with the Man-lining technique applied, it has also loosed a bit less weight drying than the non man-lining one. In comparison with the Money Makers with which they have grown the result is the same. Both Gorillas have each produced more than any of the Moneys comparing them 1 to 1. Also buds are a bit dense than the moneys, but none of them is really desde at all. *****ESPAÑOL***** Sin duda estas plantas no han producido mucha mas cantidad y densidad de cogollos debido a los 2 graves errores que he cometido (quien se haya leído las semanas sabrá a que me refiero). No obstante, puedo decir que estoy contento con la producción obtenida dados los errores cometidos. Entre las 2 plantas, la que más a producido y ha generado cogollos más densos ha sido la Gorilla con la técnica de Man-lining aplicada, y también ha perdido un poquito menos de peso en el secado que la otra. En comparación con las Money Maker junto a las que han crecido el resultado es el mismo. Las Gorillas han producido cada una más que cualquiera de las Moneys comparándolas 1 a 1. Así mismo, los cogollos de las Gorillas presentan un pelín más densidad que el de las Moneys, aunque realmente ninguna de las 4 plantas ha generado cogollos densos del todo.
Likes
11
Share
Hello guys ! Hope you are doing good ! New weeks and the girl is now totally focusing on her buds ! It's a very nice moment of the flowering, you are discovering every day the shape of the buds growing. You start to notice the smell everytime I open the door. Can't wait to see what's coming next. Take care Sawyer
Likes
14
Share
@Quintall
Follow
Hallo lieber Grower, hier mein erster Grow^^ Nach 3 Tagen Wasserbad alle in die Erde gelegt mit der Wurzel nach unten zeigend. Bis alle aus der Erde kommen 24/7 Licht. Dann 18/6 Luftfeuchtigkeit auserhalb des mini Gewächshäuschens 60-70 % Temperatur 20-25 grad
Likes
1
Share
@NitroGrow
Follow
I will post a picture in a few days when the dry is done and i also havr to find pictures of grow so i will put them as well
Likes
8
Share
@valiotoro
Follow
A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 96g !! For the light i’ve used the Spider Farmer SE-7000💡
Likes
17
Share
Going well, have trained her horizontally! Now she has the desired shape & I will let her grow upwards to create some nice Cola's.
Likes
13
Share
acho que ainda consegui produzir uns tricomas com as correções da água, mas como o estágio da floração já estava bem avançado, as folhas começaram a descolorir muito cedo, tive que colher 3 plantas precocemente, as outras 3 menos vou tentar seguir mais 2 semanas, não estão mostrando tricomas Ambar ainda!
Likes
73
Share
got hermies in flower week 2...tried to remove most but it seems they spread their love already....found seeds on all other plants :( plant still looked great and got a great yield!
Processing
Likes
3
Share
@mr_smooke
Follow
I'm a little late with update, I was very busy. In grow room it is all under control. the buds are filling up. Strech has stoped. She is 16 days in flower. Smeel is pretty strong, i just need to set up carbon filter. Next update will be in a fev days. ✌️🤘💚💜
Likes
13
Share
@DonKrika
Follow
This was the last week that I did defoliation on the plant. I defoliated very heavily the plant this week, I removed most of the fan leaves and a ton of small bud sites that would only generate popcorn buds. Unfortunately, the defoliation did not go as planned, I accidentally cut my trelluse net and remove one big branch by mistake, but the plant looked like it bounced back and is not showing any problems. This was also the last week that I gave mycorrhizal and applied foliar spray DAY 114 - Nutes PH - 5.83 PPM- 2830 Solution Temp - 18 Watering Volume - 4L Foliar PH - 6.29 PPM- 2270 Solution Temp - 20.5 Watering Volume - 200ml
Likes
6
Share
@Kanbal
Follow
So I heard that matterhorn is an unstable plant but I never thought it was so unstable. One fenotype are doing well but plants from another mother are struggling. I checked the condition every day and every day the EC dropped and the pH rose. Which meant eating, but still showing problems on the leaves. During this period I made a mistake with the water temperature, namely when the water temperature is above 20 ° C the oxygen in the water drops drastically and these were the beginnings of my root problems. I didn't know it then, but later root rot appeared.
Likes
8
Share
The humidity this week has been brutal. It appears I have a little bit of mold stating just on the fan leaves at the base of the plant. Waiting on a dehumidifier to arrive. Hopefully this doesn’t affect the plant too much. The plant on the right continues to stretch, but as you can see I’m running out of room. Not sure what I’ll do if it continues to stretch! Any suggestions welcome!
Likes
12
Share
I have only water to this girl for few days and she loved it ! Little bit amino xtrem Metrop and she explode !