Easy grow, good

Hey everyone :-). This week she continued to develop very nicely 😍. She was repotted and I started with LST training and topping 😊. to repot there was 2.5 g GHSC powder feeding to 1 l coco. The training took it very well and after 1-2 days it grew again immediately 👍. This time it will be an extreme bush 😂👍. It was poured directly after repotting Otherwise there is nothing to report this week. I wish you all a lot of fun until the next update. stay healthy and let it grow 😀 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

I took everything out of the tent and disinfected it again. The pots have made the tent base into a ball 😅 The velcro tags fell off long ago. I decided to put some new ones on. I have some wider velcro that I would've preferred to use, I have misplaced those. Anyway, these will have to do. I also made some large pot markers to velcro to the pots, too. I figured it would be easier to recognise the plants in photos if I made some. I laminated them, then attached the velcro to the pots and pot markers. [I get bored] 😅 make everything as fun as possible 💚 I ended up finding some sticky back velcro rolls. Of course, there's no way that it would stick to a slippery surface that gets wet from humidity. So, I used my glue gun and added strips to each side of the tent liner and tent walls to hold ot in place. The 8 gallon pots are very heavy after being watered, and the liner has suffered. Hopefully, this will work to keep it in place, at least for a while! 😅 7.5.25: I also had to clean my pots, as you can see in the photos (if you want, lol). They had got very mouldy/mildewy/fungussy. 🤢 also the under side of the tent liner. So it was very lucky that I decided to clean it at this point. Or else I could have serious issues. I'll look into the ventilation as I'm not exhausting the tent because I leave the door open with very strong airflow. I did spray the plants with Trace, and I used a lot of it. So, that probably ran down the walls into the base of the tent before it dried 🤔 that could have easily caused it. I'll have to make sure I dry off the walls after I use it next time. I certainly don't want to keep cleaning everything. The plants are delicate, and unfortunately, however I try, it appears I am not. I'm always snapping branches off by just watering, let alone removing them from the tent to clean! 😅 you can imagine. Accidental defoliation? 😉 I also cleaned the light, but I have noticed on one light that there are brown spots, which won't come off without damaging the LED's. I really don't want to have to buy a new light. The par isn't great for full flowering. I just can't justify buying a new one right now, as I've already bought 2 in a year. The light has been turned up to 100%, gradually, over the course of a few days. It has been fairly warm so I moved them further away too, as i don't want them to get heat stress, as I have already noticed a few leaves canoeing and having a taco on my dime! 🤨🤔😅 I'll continue to monitor and adjust again when possible/necessary. 9.5.25: Hulkberry has certainly started her stretch! I'm really low on space to train her out, and the light has been turned up to full power. She has begun to drink more, and I gave some more dechlorinated water PH'd to 6.4 with ♡ 1/4 tsp of Greenleaf nutrients Sea K(elp). PPM: 800 PH:6.4 I am very pleased with the recent growth spurt, so let's hope I can accommodate her! 😅 9.5.25: It's a necessity to keep the soil moist. That means I need to water more often now. Today I watered with 1.5 litres of dechlorinated water PH'd to 6.4 which contained: ♡ 1/5 tsp of Sea K(elp). By Greenleaf nutrients ♡ 1/4 tsp Ecothrive Biosys. PPM: 564 PH: 6.4 12.5.25: Hulkberry was very dry, surprisingly. Although I guess I've been giving her less. She was fed with a high dose of Ecothrive Trace: 7ml/7l. She was fed with 6 litres over the course of the day. PH:6.4 PPM: 515 I had added this as a foliar spray last week, and it has apparently damaged some leaves. Left some dry orange patches in the leaves. So, having that happen makes me want to just water with it. Thanks for checking out my diary and hanging out 💚 ✌️ 🍃 😊 🌱

Hi nice people! I decided to keep the lower tiny branches and this week I defoliate her quite a bit, as lots of bud sites were covered. Overall a great week, buds are developing very well as shown in the pics. As always, stay safe, stay high!

👉With each day it grows a noticeable amount. Its staying short and the leaves are actually touching the media on the lower set. Its actually on its 3rd node, and i will probably top it on the 4rth. I lowered the light from 36 to 24". This week i will lower it again to 18". The plant is short but its growth is still vigorous enough. under the leaves there is vegitation emerging as well. I like the fact that its staying short, I will probably need every inch of of my tent so the longer its stays short and grows like a bush, the better. 👉Im doing the week 3 nutrient schedule for another week because week 3 is the highest levels of grow nutrient. My EC target is 1.7 and is near the high end of the recommended range. I usually start with 2 gallons and then mix and pH the batch. If the EC is high I then ad pHd/calmag/ArmorSI water to lower the EC to the desired range. Im feeding 1 liter of nutrient solution and the runoff is an average of .6l. I give this 2x a day. The EC is slowly creeps up over 3-4 days and when it gets to 25 to 30+ EC I use a liter of rinse solution before the next fertigation. the rinse solution is same water source as the nutrient mix, (RO water at 5 micro-Siemens from a medical grade RO unit) with Armor SI and Calmag pH's to 5.9. The machine isnt at my house so I mule the water in 6 gallon water carriers. Eventually the plant will be big enough that more solution is needed at each feeding. During the Critical Purple and Hindu grows, the EC would actually never guild up because the plants were absorbing a lot of the nutrients. I will gauge the needed inflow volume of nutrient solution by the amount of run-off. Currently 1 liter is what I determined is the minimum needed to keep the coco wet and buffered. As the plant absorbs more water the drain off will decrease. I will target 20-30% run-off from inflow volume. EC value also determines inflow volume but to save on mixed nutrients I like to precede a feeding with the rinse solution if the EC is too high. 👉I disinfect the water jugs 1 time a week with 1% bleach. I disinfect my nutrient solution dispensing jugs at each batch mixing. My watering can and measuring vessel, I rinse with the H2O2 spray at each use. 👉To help keep the grow clean I have a 1 gallon garden sprayer filled with water and 60ml of H2O2. The recipe is usually just 30ml/gallon, but I wanted it a little stronger. I spray the exterior of my cloth pot once a week to rinse of the build up nutrients and prevent mold, mildew and green fungus. I also use the spray to disinfect the drain trays as I swap them out after a feeding. I have a couple dozen white wash cloths that I use to help clean and dry things. I use fresh wash cloth each day, and keep everything as clean as possible.

420 Fastbuds FBT2302 Week 7 Weekly update for these two frosty ladies. Both are starting to get super frosty especially the one. Giving off a sweet smell now at the flower sites. Both are pretty identical in height,leaf structure, and smell so far. Really excited to see what will come in the weeks ahead. All in all Happy growing

Hello all, some pistils are turning brown, a quick google search tells me it could be 3 things 1-Light heat 2-Herm 3-Nutrient burn I would appreciate any opinions Happy growing

se mantiene alimentación base de vegetación por los primeros 10 días del cambio fotoperiodico, aplique ultima vez preventivo, parámetros de cultivo alineados

Lookin good, no more herms so far as I’ve tightened things up hopefully that’s the last of them for good. I installed a 4Inch AC infinity fan and filter as an intake so I have been able to close all of the vents. At this point the leaf strip has proven to be a solid method, I have nothing to compare bud size at this point but just the extra space it opened up is a plus. I’m sure the lowers will be a little more firm and the plants obviously haven’t had to be fed as often as usual so its saving time, water and nutrients. The added microbes have also allowed me to keep my ppm around 1000 instead of 1080ish without any sign of deficiencies. The Mandarin cookies x Dionysus has a little cal-mag issue but that was a trait from the mother which out of 10+ grows all had a cal-mag deficency. I gave everything a little flush last watering and took measurements then a good feed today REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

Hello everyone, The girls are finally outside in 20 gallon fabric pots. This season I have a greenhouse for them and I hope it goes good. Still have to build the first cages around them and start stretching them. 🎊🎉 finally, summer is here 🎉🎊 See you guys next week 🤞🤞🤘🤘👊👊👊

I had a good week with this plant. This strain really stretched out during the last few weeks of veg, I had to move my grapes and cream plant into my closet 😂.

Buds are continuing to swell and the smell is really starting to come through. Ordered a magnifying glass a couple days ago so I can start to check out the trichomes on the plant

One of them was more Craplato so i pulled it. Got one decent one left.

Day 36 from seed touching soil. Cookie still racing Devil for a win. All girls started to smell strong. Development is nice, Mars TSL2000 making wonderfull job. Light is on 75% output. Watered today , 3.2 liters of 6.3 phed dechlorinated water went in. Thought to instal scrog, but its hard to reach anything even now, plus lifting pots becomes a problem. So will do heavy clearing next week or at the end of this one. Day 39. Girls got heavy training. Looks sad, they were ready to sleep, i did it very late in the day and watered next morning. Happy Growing !!!

She's almost done. Starting to see cloudy so I'm just continuing to water. Started the water only last week so things should start to fade out alil more now. .. Definitely learned alot for next time I run this strain. Gonna be fun to redo. See how this week goes tho, not the biggest plant but for the minimum amount of inputs she's done well. But till the next update. Hope ur all doin well ,best of luck !!

Praying the warm weather holds out until October. I was told this strain take about 60 days in flower before harvest

Update coming.