The Grow Awards 2026 🏆
Likes
Comments
Share
One plant "lost" to budrot, luckily the only one which was 5 days older than all other 3. Budrot on 3 main buds, very early stages, noticed rather quickly as I'm a very alert person with stuff like this. Lost around 10% of infected and healthy material, and harvested early on around day 73. I lost around 2 weeks of weight gain & ripening with the early harvest, but I had to do it for the good of the other 3 plants. Infected plant was a Granite Haze F5, quick dry with wet trim to avoid more mold / rot. 5 days of drying at 20°C and 65% humidity, and light breeze of air. Final dry yield was 205g dry out of the second smallest autoflower here. Currently still in its curing stages, still a hay-ish smell to it because of the emergency dry, but I slowly get peppery notes, mixed with liqourice & ass. Yes it stinks. All other 3 plants are good so far, but this week doesn't have lots of images.
Likes
5
Share
very strong smell this one and very big leafs drink 7 liters a week
Likes
38
Share
I've increased the feed and light now. I will repot soon . I've pulled the browned leaves from the lower stem and the new growth is slowly turning green . They'll burst into stretch mode once I repot them next week . Hope everyone's grow is going well and the sun is shining on you 🌞
Likes
15
Share
@Ronzo9
Follow
Decent week..... flushed the nutes and started again because it looked like I was scorching it! Smell has increased 10 fold and my garage stinks 😂 I had previously convinced my Girlfriend that the smell was actually the plant food, but now she sees me for the liar that I am. Looked under the magnifying glass today and seen milky trichomes and what looks like a couple that are half turning amber. So for that reason (and partly because I’m getting dogs abuse about the smell) I’m going to start flushing from today and move to harvest mid next week 😎
Likes
74
Share
Week 4 - 01/22 to 01/28 2021 Pictures from Days 25 + 26 TRANSPLANTED! Hopefully the stunted size means the flower timing is delayed as well, I've gone through a runt LSD before so if it flips before 7 inches I'll just pull it and start a different seed, I still have more Purple Lemonade beans so might pop one of those into the 5gal with no transplant and see if I can get a better base. More and more reasons to go back to a photoperiod grow after this for more control/really test out the new lights 🙌 Ended up more 50/50 ratio of Destiny Organic's Dark Matter Living Soil + ProMixHP since I had to make the Destiny last. Apparently they went out of business just after I decided it was my favourite/new soil :( Would rather stay away from Ocean Floor since I haven't had the best experiences with it (bugs/rust fungus etc) Feel free to drop some recommendations other than Fox Farms below 👍 The plant otherwise is healthy and growing well under the new set up. Still 3 and change tall but in context of the new light has tripled in size in a week and a half. If it looks like it's still vegging and starting to catch up once it settles into the new RootPouch 5gal woven then I'll keep it going. I raised the @ViparSpectraLED P1500 another eight inches after transplant and started basic LST. I really wanted to get these four under a ScrOG but if 3/4 are already flipping and the LSD is still runty I might have to wait it out again. I have the @MarsHydroLED TSL2000 set up and ready to go once the girls settle into their new pots. Have the new surge protector/heavy duty power cords/power tool grade timers as mentioned in Week 3. Some of it shown in the pictures. Threw some videos in this week as well with some Queen's Radio GaGa, Beastie Boys' Brass Monkey, and a little hint of Arkells ....COME TO LIGHT on the short @ViparSpectraLED ..GET IT.. 😓 -- Thanks for checking in! Throw down a like and/or follow so I can return the favour 🙌 Check out my Diary of the Year 2020 Entry for my Original Auto Sour Diesel: https://growdiaries.com/diaries/54258-fastbuds-original-auto-sour-diesel-grow-journal-by-glazedgrow IG: @GlazedGrow CannaBuzz: @GlazedGrow
Likes
13
Share
Questa è veramente una bestia! E una delle poche genetica che mentre ingrossano i buds ne mette fuori ancora altri! È una cosa pazzesca! I profumi sono molto forti è ricordano molto il carburante,limone,fresco! I buds sono ricoperti di uno spesso strato di tricomi che ogni giorno diventano sempre di più! Anche le foglie più grandi ne hanno parecchi! Nen vedo'ora di mettere le mani su queste cime secce! Ma la strada è ancora lunga! Tra una settimana inizio a fare flush per 7-10 giorni (si spera) questa è una varietà che da veramente molte soddisfazioni in growbox! Green House Seed non sbaglia Mai un colpo! Che bello ! Spero tanto di fare tante altre piante del genere per loro (se rimanete sintonizzati il prossimo progetto è veramente da paura ,con genetiche micidiali) quindi miraccomando alla prossima settimana!💪🏼💪🏼💪🏼💪🏼grazie a tutti voi
Likes
9
Share
IF YOU WATCH THE VIDEO YOU CAN SEE THAT I MOVED THE LAST AUTOFLOWERS INTO THIS 5X5 TENT, AND MOVED THE PHOTOPERIODS INTO THE 8X8 TENT. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
14
Share
@Terpyboyz
Follow
So this grow came to a finshed but I had a. Few issues that’s held me up from finishing up the diary, but in due time I will reupload it all in order soon. But over all I will also update with a final weigh in of each strain produced so stay tuned 🤙🏻🔥
Likes
9
Share
week one of flower looks cool so far no problems with the feeding just used CAL MAG and Mammoth p in the watering the media is holding the water for at least 4 days. going to use the auto flower as a gage for the flowering bump if it needs one.
Likes
9
Share
** COST ** TO RUN - Used previous ⛺️ setup : $0.00 - Monthly electricity : $36.73 <-- other ladies sharing ⛺️ - 3 Gallon Fabric pot : $0.15 - Bonsai wire : Apx. $0.03 - Reused soil from last run : $0.00 FOR NUTRIENTS - Jadam Microbial Solution : $0.00 - Fermented Plant Juice : $0.00 APPLYING - JMS : 30ml / 1 Litter - FPJ : 30ml / 1 litter TOTAL COST : $36.91 Throughout the week, I give compost tea, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@
Processing
Likes
20
Share
STRAWBERRY PIE AUTO (FASTBUDS) WEEK 3 Started very light nutrients. I have noticed some pistils later in the week.. so likely not going to top this plant, as I have a feeling she is going to flower sooner than expected
Likes
27
Share
Harvest day 68 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. First of all I would like to compliment Green House for this genetics. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. Unfortunately, this phenotype is nothing special, which is very annoying given the price :-( The smell is ok, but nothing great, but the high is good, which is less important to me. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
11
Share
DAY 14 of flower🌼🌸 Feed compost tea n sst tea No bottles no nutes
Likes
3
Share
@AustinRon
Follow
Week 8 - Flower Week 4 Lemon Jeffrey by IRIE Genetics (14 Starts for 8 Finishers) 63-70 Days Flower (9 - 10 Weeks) Seeds Wet: Monday 14 May 2023 Harvest Date Range: [ 2023-08-11, 2024-08-21] Weeks Observations - Local weather conditions have been unseasonably HIGH Humidity. First time in 3 years am unable to reduce to standard levels. Dehumidifier being installed today. - Today is the 21st day since flip - we’ve experienced bolt since week 1, up to 5” in a day Start of week: - Dates: [2023-07-10: LJ2Q 57:F:4:1, 2023-07-16: LJ2Q 63:F:4:7 ] End of Week: - Plant Height Range: [ 30, 44, in] - Water/Day/Plant: [ 720, ml] EnvironmentalCurrent: - Scotoperiod: [ 12, hrs] # 1900 - 0700 + 24 - LightIntensityPeak: [ 975, µMol/m2/s ] - DailyLightIntegral: [ 42.1, Mol/m2] # Target: < [ 40, Mol/m2/day] - LightDistance: [ 12, in] # Despite SuperCropping (Bending & Twisting), we’re wishing 12” of the Light at End of week - TempAvg: [ 77.5, °F] - RH: [ 66.9, %] - VPD: [ 0.85, kPa] # Achieved Ideal ‘Early’ - need to bump to 1.05 to 1.1 - FeedwaterPerPlantPerDay: [ 720, ml] - FeedwaterPerDayTotal: [ 5760, ml] # 1.5 Gal/Day - EC: [ 2.0, mS] Environment NOTES: - Because room temperature overnight is 68°F, we need to 1. Nightly (2200) CLOSE AC VENT to Grow Room 2. Daily (0700) OPEN Vent to Grow Room - Goal is to maintain TENT & CABINET TEMPERATURES OVERNIGHT - RULE - CLOSE Room Airflow during ‘Daylight’ periods(2030 - 0700) When on Flipped Schedule (Night LIGHT/Day DARK) - OPEN during ‘Nightime’ Period (0700 - 2200) Objective - 8 Plants, Single Colas, Sea of Green SOP: - WEAR CLEAN GLOVES FOR ALL SEED OPERATIONS - CLEAN All Instruments before use - Light Strengthveg := 100 + (#nodes * 100) - Light Strengthflower := [ 1000, 600, µMol/m2/s] - Scotoperiodveg := [ 1300, 1900, 6, hr] - Scotoperiodflower := [ 0700-1900, 12, hr] Environment - Mid Flower (2 Weeks) (Week 8-9) (F4-F5) - Temp: 78-82°F - VPD: 1.1 ± 0.1 - Photoperiod: 12/12 - Light Strength: 930 µMol/m2/s - EC: 2.3 - Late Flower (Week 10-14) (F5-F9) - Temp: 78-80°F - VPD: 1.2 ± 0.2 - Photoperiod: 12/123 - Light Strength: [930, 850, µMol/m2/s] - EC: 2.1 # Week 9-11 - EC: 1.4 # Week 12 - EC: 1.1 # Week 13 - Finish (Week 14) ( F10) - Temp: 78°F - VPD: 1.3 ± 0.2 - PPFD: 750 peak - Resin Bloom ONLY - EC: 0.8 Rooted Leaf Hydro 1.7 - 1.9 EC (Half RLA,Hydro Chart, EC to Targets): - Primer A: [ 8, ml, gal] - Primer B: [ 8, ml, gal] - Silica Skin: [ 4, ml, gal] - SLF-100: [ 5, ml, gal] - PhotosynthesisPlus: [ 6, ml, gal] ____________________ Mon 10 Jul 2023 # Flower 4 LJ2Q 57:F:4:1 - W/ Dehumidifier Installed, our Environment is now … Tue 11 Jul 2023 LJ2Q 58:F:4:2 Refill Res - [x] 6.5 - 7 Gal - [x] Primer A&B: [ 8, ml, gal], [ 80, ml] - [x] Silica Skin: [ 4, ml, gal], [ 40, ml] - [x] Photosynthesis+: [ 6, ml, gal], [ 60, ml] - [x] SLF-100: [ 5, ml, gal], [ 50, ml] - [x] Dr. Bohners: [ 10, drops] - [x] ECRange: [ 1.9, 2.0, mS] - [x] TempReservoir: [ 60, °F] Wed 12 Jul 2023 LJ2Q 59:F:4:3 Thu 13 Jul 2023 LJ2Q 60:F:4:4 Friday 14 Jul 2023 LJ2Q 61:F:4:5 Sat 15 Jul 2023 LJ2Q 62:F:4:6 - Plants per Feed Line: 4 - Feedwater per Line per feed (FPL): 120 - Feedwater per event (FPE): [ 480, ml] - Events per day (EPD): 12 # Hourly Fertigation During Lights ON - Feedwater per day: FPE X EPD: 480 x 12: [ 5760, ml, day] - Mix 2 Gallons @ 75% Strength (Medium Chart, FW 3) - Primer A: [ 7.4, ml, gal], [ 15, ml] - Primer B: [ 7.4, ml, gal], [ 15, ml] - CalMag Fuel: [ 3, ml, gal], [6, ml] - SilicaSkin: [ 3, ml, gal], [ 6, ml] - Lush Green: [ 3, ml, gal], [ 6, ml] - Root Anchor: [ 3, ml, gal], [ 6, ml] - Peak Bloom: [ 3, ml, gal], [ 6, ml] - Resin Bloom: [1.5, ml, gal], [3, ml] Sun 16 Jul 2023 LJ2Q 63:F:4:7 
Likes
89
Share
@BioBuds
Follow
As I write this, my throat is swollen with sadness. Our little doggy, who is 15 years old, now is too weakened to be able to move ok and is losing weight rapidly. Not in pain yet but we will not let that happen. So with a very heavy heart after a year of sadness and lots of fear, we are saying goodbye and spoiling her with extra goodies. Still wagging her tail, oblivious. We all know it comes one day but still, it hurts. Sorry to get you down with a sad story but at the moment it really helps me to share it with someone, thank you for that. So I'm seeking some extra comfort with my plants, to get my mind off things and be amazed by how fast these plants go. What power these little plants have. I did have some problems, ridged leaves on 3 of 4 plants, leaving me scratching my head... The bigger pot didn't have the ridging. So underwatering, too much nitrogen, too warm... I don't have clue but after some clear water, all seemed to return to normal. Also put the Sp-3000 a bit higher in the tent, to control temps. After that again mega growth, we are just at week 4, which is amazing to me. Cant wait to see the endresults. See you next week my friends!
Likes
16
Share
I love this plant. She is so pretty and stinky. Not much to report just waiting on more amber trichomes and the chop chop. Hopefully the next update will be a harvest.
Likes
6
Share
@PoshGrow
Follow
Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #1 2020 July 23 - 30th. General Info: When planted: 2020 July 23th. Week: 1 Days: 1- 7 Last Update Day: 2020 July 29th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan:             Lower: 4" Ram Fan.             Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Comment: Germinated in paper towel, sprouted under 36h. Planted in 7gallons fabric pots filled with NPK soil under 18h light schedule. Watering with pH corrected water when needed. Maintained 65% humidity and after 24h we have 5 nice seedlings 😉✌️
Likes
90
Share
Germination date 🌱 29/11/2021 Day 77 16/02/2022 Strain 🍁 SinCity seeds Frosted Biscotti (Biscotti Sundae x Whitenightmare) THC% • Unknown 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Living soil (dry amendments) Grow Bloom Bloom2 MycoBoost Barley 🌱 Growing Media • Soil Notes 📝 The lefts one running slightly behind. Still some nice frost levels but nothing compared to the Coco ones. Coco is certainly becoming my favourite media to grow in. More expensive but alot faster in growth 🌱💚 Discount codes in bio for Mars hydro