Hola amigos. Week has gone again and i had timelapse recording. Enjoy 🤣 girl looks better but not that good yet. I also have that og kush enough for couple months soon so this prob going to get couple months more time to grow those clones for me. LST done. 24.4 couple days timelapse added. Camera has to make room for upcoming grow. See you next week.

Back to the 1000 wt as temps here are modest for July atm. Still 1 plant not flowering like the other 2. I will be patient as it’s overall structure looks amazing. Slowly easing into the process not as much anxiety about every little thing. Changed my light out for my lower power 600 wt led instead of the 1000wt TMLAPY. Maybe not the right move i really don't know what to do b/c i have tip burn and my tent gets a bit hot in the low 80s when its in the 90s here in Illinois. I have an makeshift cooler w fan and some fans and my exhaust fan system which im pretty sure is under powered and overall and bad beginner purchase. I will upgrade as soon as i can financially afford to. Also had flooding issues in basement which is always an adventure, i eventually need a better way to get my grow tent up off the ground b/c water does get in there sometimes. Doing everything in my power to avoid mold and have fans and filters and cleaning, but again this may have been a beginner mistake and i may have to find a new home for the tent for the next time. Also I definitely had been under watering the girls and came close to one of them dying and have to remove some yellow leaves at bottom, they all look stable now. 1 out of 3 plants has a darker color and looks fuller and healthier w less tip burn but it is shorter only has a couple of hairs where the other 2 are going full on into flowering with so many hairs and growing much taller. Possibly stunted the growth... Anyway the word of the day for this week is TIP BURN. I will submit a question to follow. i recently uploaded a video that should show all 3 plants w the tip burn.

@twenty20mendocino Ateam R&D Update ~ Let’s Go day 77 for these girls an we are looking amazing! The Sangria Auto got her last flush today, 14 days flushed and will be going in the dark for 48 hrs a get her ready for the chop! ~ the Queen of Diamonds and VSOPs are looking like beasts ! These girls got massive , an we will continue to let them get bigger an veg out for another week or 2 and we will get em ready for the flip! Keep them eyes peeled for next week’s update yall! Hope y’all have an amazing productive day as well as a great safe weekend! Peace love an positive vibes to all y’all Cheers an Happy Easter weekend to y’all Blaze on 😶‍🌫️💨💨💨💨💨🤙🏻

Harvest was

Achte Woche

12/25/23 - Beg of week Building water level back up

I have decided to harvest a little bit early so spider mites don't come back and the weather is favorable for drying this week. After the chop, I also did bud wash with 3 buckets: 1. 5 gallons of water and a cup of lemon juice and a cup of soda bicarbonate 2. Warm water 3. Coldwater There were tons of nasty stuff left in water. After washing I left them to dry under a fan and shook them off to remove as much water as possible and then put back into the tent to dry with a dehumidifier and outtake on with 2 oscillating fans NOT pointed at the plants. Humidity is currently around 55%. After the first day of drying, I realized I will not be able to control good conditions in my tent for drying so I moved the plant to hang dry in the climatized room for a second day. During the second day, I trimmed buds and removed stems and then put them in brown paper bags to slow down the drying process. After 2 days of drying buds now weigh around 240 g, Humidity spiked to 87% outside on the third day and I had to constantly run A/C and a dehumidifier to keep the room at around 20 C and barely 55-60 % humidity. Grew tired of this so I tried something new from the third day. It's called Lotus curing and drying and works with any frost-free fridge. I put brown paper bags with buds inside the fridge at around 7-12 C and the humidity in the fridge is around 40-50%. I also have temperature and humidity probe in one brown paper bag so I can react if it dries to fast. Humidity is hovering around 70-80% currently and my plan is to manipulate humidity inside the fridge by opening it, adding moisture, or regulate temp so humidity drop as slow as possible. When it hits less than 72% when tested outside the fridge in the room temps I will start normal curing process in jars. After a week of drying in the fridge, jars are in the drawer curing right now. I sample tested one Dynavap bowl and flavor is decent with the sweet scent but it still needs a bit more time to be perfect. High was the same as my first Sweet tooth grow, the main thing I felt after finishing Dynavap bowl was calm and relaxed with time slowing down.

Well unfortunatly due some technical issue on GD's side my pictures and videos arent uploading right so sorry for that. All plants seem to be adjusting fine and i took a cut (when topping) of the top right grape & cream cause she handled everything like a champ so far where the others had some difficulties. We'll see if that holds up come harvest time but maybe a cross between that pheno and a seedsister might be viable. Still just water. I did adjust the blumats to dry up a little more and the plants are taking that for the better. Toprow is 3x grape&cream Middle row 1xMokums Tulip 1xVanilla Frosting 1xLemon OG(own cut) Bottom row Sour Tangie Dawg Stay tuned!

Switching to Flo !!! Adding Bio Boost 250 W to 400 W

;)

With this beautiful lady just days away from hanging I must say she is a sight to behold I dont think my cam is doing the job right but I'm working on that for future grow. The buds are rock hard with a purple and gold color on her buds, she is already cleaning up awesomely so flushing should take it a notch up stay tuned.

Pineapple aka Brokeback 30 Gro 20 Micro 10 bloom 15 cm 15 sb

Going well, started flowering . From what I've read about growing Auto's, it says to feed them about half the amount of what you would a photoperiod plant, but i have been giving her nearly full strength nutrients & she is doing great. If you're looking for the next strain or genetics to grow, then you should definitely give Fast Buds a try. 100% Quality. Now with their new affiliate program if you use this code - GROWEED when purchasing you will receive a 15% DISCOUNT off your purchase.

Hello my friends 👨‍🌾👩‍🌾, Week was good, preflowering started, leaves are really great, nice green, no spot, really healthy 💚💚. I continue my training for the scrog, almost good :) And did again a defoliation. I'll probably did a last defoliation on the end flip, to remove under site and slim stems. Not yet seen pistils, but stretch in progress. I stay in veg week, because we're on preflowering ✌️ 💦 Only one watering this week, after transplant I had given lot of water. Water + Terra vega + Canna Boost PH@6 Lamp @100% Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 See you next week 👊👊 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Vannila T https://www.thehighchameleon.com/shop/vanilla-t-5

Update day 10 of transition to bloom this Goofiez 2 it’s soy strong !!

Week 10 – Day 71 Flower Day 43 ⚠️ Mimosa Evo – Hermie Alert! Unfortunately, some bad news last week: I found a few bananas (nanners) on one of Mimosa Evo’s main colas – a couple were already open 😬 🔍 I immediately removed the affected buds and checked the entire plant thoroughly. So far, only that one cola was affected – nothing new has popped up yet ✅ If you spot anything suspicious in the pictures: feel free to shout! 😅 🤷‍♂️ Cause remains unclear – could be light stress, or maybe just genetics. Still around 2 weeks to go, so I’m keeping a close eye and hoping for the best. 🌿 Current status – Mimosa Evo She still looks stable and healthy overall 🌱 ✅ No new nanners found since the cleanup 🌼 Buds are developing, but noticeably less swollen compared to White Widow I suspect the hermie stress might have diverted energy away from flower production or impacted development.

On day 38, we topped the top shoots of the chimera again because she is getting way to gig already. Then, after 40 days in the vegetation phase, we sent them into flowering. From now on 12/12h Day-nightcycle We cut some Clones at day 47 because we had to wait until our clonex arrives.

D57/FD29 - Thing going grand with the Cookies so far (enjoying growing these Cookie Based Strains). Smell from it is divine! Touch a stem and its a lovely citrus smell left on you for ages! Noted in a previous comment, like a perfect sweetness, fresh lemonade. You'd wear it as an aftershave alright even!!! :P They're drinking a ton but not taking on as much feed (as I've come to expect now in flower) so dropped the base and bloom by 10% (same recommended ratio of 1:1) and kept the PK9/18 booster in there at what would be recommended strength for this week...its the same as last week but week 1 (week 4 of flower) of PK9/18 should have been double...didn't want to overdo it as when I used recommended strength 1st time I got it, it created some serious root zone acidification (Which could have been all the K getting used up but was a mare getting the pH up from 4.something every day!!!). Did my usual root flush/wash before adding feed as the EC had crept up to 2.2 (and I know from experience, that starts messing with your numbers if you don't wash that out right) and took about 50L-60L to get the tank to 0.3EC (base is 0.2) was was a lot of salt sitting on/in the roots. Had a ton of underscreen dead leaf to pick up and just cut some wee straggly offshoots (I know, bad idea this late in flower but they were basically dead/no nutritional value left so basically a bug magnet). Still waiting on Bluelab to send me the RMA approved pH pen...been 2 weeks now since the RMA was approved and still no postage - using an "essentials" pH meter and just dipping in Calibration Fluids between each feed add to ensure some accuracy (As you can see from my recipe page, I like to know what the feed does to the pH - also gives an idea on what they're feeding on when you see pH swings in a different direction that expected). Geeklight also got back to me. In all fairness, I've been dealing with them direct (Got the light fixture from Alibaba, direct from China - big gamble, right???) and they have been more than helpful. I have been telling them about the light randomly coming on at 5% (lowest brightness) and provided evidence; turns out someone else now noticed the same issue with the Remote App controlled variant too and they believed it was a loose control board/wire. They said they did some stuff and that fixed it but I also thought mine was fixed by forcing the dimmer to 0% and it still randomly happened (even though it didn't do it for weeks) so the other person may still get a surprise!! 😋 So, I took out the driver today, pulled out the control board and all wires seemed good and no looseness in the control board (although it does look slightly bent as the Spade for the IR/UV switch isn't fully bedded in). But, like I say, in all fairness to Geeklight, they're posing me a new control board tomorrow from China AND giving me the longer driver cables so as I can put the driver outside of the tent! Give me a bit more room for my Flower Initiator (and hopefully UVB Tube) and great to see them honouring the Warranty. RHC Seems to be flowering nicely as can been seen from the pics. Stacking well, buds coming along. Slight pinkish tip to the pistils on some buds but not the shocking pink as you'd see in the sales pics...hopefully it goes there though! Also noticing a bit of an early frost on a few flowers...like real good frost! And this is only day 1 of week 5 (I know, I do this diary arse about face)!!! Hoping Geeklight get this driver control board and longer cables to me quick so as I can get the driver out of the tent as I'd really like to get the UVB in there to frost them up in a week or 2!!! May only be getting about 9" clearance though so dunno, could be dangerous!!! 12" is the lowest recommended...but then, I could do the 15 min burst lighting (On 15, off 45 min every hour) so lower the risk of burn but get them more exposure (but lowers the lifetime of the tube). They get UVA from the LED's on the light at the moment for a 1/3 of the day and have been since early veg so should be hardened to it by now!!! Anyway, think that's enough s**te chatted by me!!! Happy growing all!!! 💪