Started out great as a seedling. On week 3 things I used cheap clips that jacked things up and after a certain amount of time passed I decided to transplant it to Fox Farms Strawberry fields soil where it quickly went into flower shortly after. I chopped 77 days after planting the seed. It produced 47 grams dry of amazing flower. The smell is incredibly pungent -sweet and citrus scent. The high is great as well. After drying for 8 days they were then thrown into a grove bag for an infinite cure until consumed.

Week 16 Day 115 September 10 Buds are bulking up slowly added calmag today 1gr/l

At day 44 plants were watered with about 3 liter of fresh water w/o any nutrients. I measured TDS of the drainage, it was kinda high, about 1600 ppm. But plants in general seem to be in a good condition. I had to remove some leaves to improve air flow and give more light to lower buds. I think in a couple of days I'll add some nutrients for watering, so I'll update this week description. Only B.A.C. foliar spray was used by the end of the day. Both plants show that coloured genetics and look amazing.

MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA So it's been 17 days under the new MARS HYDRO FC4800 and the TSW2000 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. Its the NEW blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I'm in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. I CANT BELIEVE the amount of crystals the plants have already🤘 they just started getting bigger hair clumps and I didn't expect to see this much already👍 awesome lights do an awesome job. So it's looking good for these strains I made👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll Instagram: @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll Instagram: @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll Instagram: @marshydropenny Happy growing to all my friends 🤜🤛

MrJones Ztrawberriez Auto 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 💧 Feeding - Using Gaia Green Grow / Bloom and Compost Teas 🍃Training / LST-Defoliation-Topping TBA 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between products each month for Integrated Pest 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 🗓️Sunday- 12.16.23 Having to deal with WPM, what a drag to see these ladies slow down because of this, using Mammoth CannControl, should see them bounce back quickly, the buds are rock hard and smell amazing! 🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️Bud Description Ztrawberriez Auto produces long and fat buds with a beautiful light green shade with oftentimes purplish hues and a thick layer of resin that starts at the top of the flowers and continues to the tip of the sugar leaves. It’s the typical bud structure you would expect from hybrid varieties topped with an explosion of fruity terps that’ll hit you in the face with a blend of creamy, fruity, and sweet aromas as soon as you break the buds open. A must for terp heads and extractors looking for exaggerated flavors and aromas 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓 ▶️SOIL MIX 40% ProMix HP 40% Coco Coir 70/30 15% Worm Castings 05% Malibu Compost 🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓╰⊰🍓´🍓⊱╮🍓

Bonjour à tous les padawans et maîtres jedis Jour77 arrosage avec 30 centilitres d'eau ph6.3 Jour80 arrosage avec 40 centilitres d'eau ph6.3 Jour82 arrosage avec 30 centilitres d'eau ph6.3 Jour84 arrosage avec 25 centilitres d'eau ph6.3 J'estime à environ 10 12 jours la récolte. Comment connaître approximativement le moment d'une récolte en vue d'un rinçage ? Ou tout simplement si la plante est rincé de tout excédant d'engrais quand procédé à la récolte ? La meilleure façon de juger de la maturité des plantes est de regarder les glandes de résine, également appelées trichomes. En utilisant un microscope idéalement avec un grossissement de 100x, vous pouvez facilement déterminer l'état des glandes en résine et éviter d'avoir à deviner. Les trichomes passent par 3 étapes différentes: 1. TRANSPARENT Les trichomes transparents ne contiennent que des cannabinoïdes précurseurs qui ne sont pas psychoactifs. La récolte à ce stade ne vous donnera pas un produit très puissant. 2. MILKY Les glandes en résine laiteuse contiennent du THC entièrement mûr. Pour obtenir des têtes aussi puissantes que possible, vous devez vous rapprocher le plus possible des trichomes 100% laiteux. Notez qu'il est impossible d'obtenir 100% de trichomes laiteux, car de nouvelles glandes de résine sont produites en continu. De même, même après la récolte, les trichomes continueront de se développer. 3. AMBRE Les glandes résineuses de couleur ambre indiquent que le THC a été converti en CBN, une forme dégradée de THC. Cela signifie que votre produit a perdu une grande partie de sa puissance. Le CBN n'est souhaitable dans aucune culture, car ses effets sont plus narcotiques qu'une véritable élévation. Personnellement j'aime bien les récoltes autour de 15 à 30% d'ambre mais c'est juste une préférence Que la force soit avec vous 💪

🍁gorilla cookies

Welcome to my MilkyWay F1 Auto Diary, Untopped VS topped. Results are in. Days 71-82 ripening 0-13 week 11&12 Went well. She did bulk up a tad. But not much. They spent most their lives under a 100w. But, the bud is really dense all over. No larf, at all. Its a really good quality of bud I'm getting from both phenos. As far as ToppedVsUntopped well, that result is in. With a seeds used from the same pack (same parent) making true F1s as they need to be from the same batch. It why we all got different phenos, and those who ran more than 1, from their seeds, the phenos are very close. One of mine had more of a fade and looks more purple. Both smell very lovely & fruity. Nice trichome production with very dense but, rather small buds if I do say so. But the grade itself is very high. (As grade is not rated on size) overall both turned out very similar. Even fade wise, they've both developed a lovely colour finishing under high co2 environment with the SE5000 really has brought out a lot of fade i normally do not get. look at the start. It was only a few days under this light and the past 14 days they've both popped. I will also say. A lot of their life was spent under a 12-12 (3/5s of flowering). Topped VS Untopped pheno 2 & 1 Are very similar as I've stated this area will be filt in with harvest comments. Bud smell. How the dry went. And after a weeks cure. I'll rate it. So watch this space. These 2 phenos have been on just water for 10 days. I did a quick run off test. Got back 145ppm my tap is 110. So, they're good to go. Trichome wise. 95% cloudy 30-35% amber. (Hard to see, I'll try get pics with my scope) but, as you see. Both are fully ripened. Anymore and its just bud deg. Both plants leaves are showing end of life. Some are dying. (I'VE BEEN WATCHING THESE LEAVES AND SEEN THEY'VE BEEN DEAINED, ITS NOT BR) Lights The SE5000 was used for the Ripening phase. With high temps and co2 i pushed my boundaries and got a lovely fade reaction from doing so. How I know its down to this light as I've put my Runtz under it. And as soon as I did. It developed fade. My Frosted G even started getting light purple on its sides. The temp in tent has been pushed to 31-33c (that's not leaf temp as I've fans blowing on my plants, and that lowers surface temps by a few degrees.) They've been on 17hrs of high powered light. At 25-30cm id no choice. My temps are mad high this time of year. Harvested Both plants are been pult they're getting their last few hrs. You'll then see the last few pics in a few hrs. I'll get bud shots later, smoke reviews and then to be fair. I'll then mark it by the GD rating system. As I do with all my strains. (So I've 2-3 wk delay in my diaries as they're Harvested, mostly) both plants I'll try push them as far as I can through the drying process whole. But, as I'm dealing with high temps. Lower RH and a fastercl dry is pref to a longer dry in hot conditions might not make sense, but 30+ hot weather harvests, I've got this down. Mind you only this round all my other hot harvests some took a few weeks to rid the hay smell. This avoids it and locks in potency. Most of the drying is done by leaving the plant in the substrate just before the plant goes for itself for fluids. 4-5 day dry as opposed to 5-6 day dry with weed that loses half its stenght. (dry harvesting look it up) Thanks to James from RQS, although I know everyone and their sister got the offer for these seeds I am defo going to be trying more from RQS, if it's buying. I'll get round to it, and depending on the quality of smoke it might be soon. If its a real nice auto, I'd love to try a fem of theirs for my winter crop in October. But, that'll depend. I've lots I want to buy & try.. and when favs are found. I'll invest. I would like to thank everybody for the activity this diary has gotten. Its possibly one of my most active diaries I've done without a harvest. And that's in no short means down to all the views and likes from you guys. And for sure I will fully complete it, with results on the smoke Quality from both phenos, if it varies, but, results thus far, structure wise they're shockingly similar. Scary so. Topping has very little affect to the structure. She grew a main cola. But both phenos, turned puples I will say the topped one was a more troublesome plant. Maybe that had a role onin its morphology. And maybe it'll affect the bud also. The topped was more demanding nutrient wise, and drank more. Maybe to support a more even bud load. (I've yet to do a through inspection, but on the VS front, it's kinda in the air about quality, structure wise, it had very little difference. Look for yourself at the heights are 3-4cm dif) lots still to come. And I'll update it soon with more results. Again, thanks so much for the support, likes, comments and how active it is, an unfinished diary moving to my home page. 1st for me. So thank you. Also to my light sponsors who played a part in this grow. Although both phenos owe their bud quality to 2 x 100 watts SF-1000 (SE5000 was used for ripening lovely fade) and I used a P1000, they shared even light distribution in the end for the most part. So, thanks to Bella for the upgrade. I'm sure when I run an RQS strain again, this time I'll know only have the fade to show, but the bud size too. Thanks again my Friends. Updates pending as of 6th June. Edit June 7th Both plants are hung whole and drying 24hrs. I don't like how fast they're moving. The buds are already soft. Should still be hard at this stage only 30hrs in. They'll harden up in the cure no doubt. Let's just hope they don't shrink too much. Will give daily updates

Can’t wait to try this cultivar, I loved both her moms obviously or I wouldn’t have made her so I’ll be back with a smoke report soon and in a few weeks another for her sisters

Fed them about 15 days ago started to show some deficiencies but they should start being absorbed by the plant now so hopefully they do well in the last 5 weeks of life hopefully I'll drop the temperatures down enough to where they'll go purple I'm praying that they do any advice would be greatly appreciated thanks for stopping by

Changed the light for the Viparspectra P600 because the SP3000 was needed in my other tent, and the p600 is enough for that size of a plant and 24/7 light to which I then switched. I found a nanner, not happy about that, looked for more but did not find any, still quite sure there are more because they never come alone. Plant is not ready to harvest yet so... I hope for the best. Some buds are getting denser, plant is slowly bulking. As of now I am considering to chop in about 2 weeks. Raise EC as mentioned in previous week. Values are average of the day. DATE - EC(us/cm) 20250719 1755 20250720 1798 20250721 1900 20250722 1998 20250723 2082 20250724 2094 20250725 2103 DATE - PH 20250719 5.93 20250720 5.78 20250721 5.80 20250722 6.00 20250723 5.83 20250724 5.74 20250725 5.83 DATE - ORP (mV) 20250719 -34 20250720 -82 20250721 -95 20250722 -94 20250723 -90 20250724 -76 20250725 -68 DATE - °C - RH% (Tent Temp/RH) 20250719 26.6 59 20250720 26.3 61 20250721 25.4 60 20250722 25.0 58 20250723 23.6 61 20250724 24.2 61 20250725 23.6 64 DATE - °C (Reservoir) 20250719 23.8 20250720 23.7 20250721 22.9 20250722 22.7 20250723 21.7 20250724 22.0 20250725 21.8 DATE - CF 20250719 17.55 20250720 17.98 20250721 19.00 20250722 20.00 20250723 20.85 20250724 20.97 20250725 21.06

Today Again a short update.

| 📅 Week 10 | Days 64 - 70 | 💡 750w 📏25' | | ☔ 38%-50% | | 🌡️️🌞 72 - 74 | | 🌡️️🌑 68 - 71 | 1/11 The reservoirs were swapped out with fresh nutrients and topped off at 5.8PH. I will give them another day or two before flushing I think. The smell is currently fantastic 1/12 There really isn't much to do with these girls anymore other than PH every day and make sure their water levels are consistent to maintain their nutrient levels. Tomorrow I will begin the Flushing 1/13 I decided on one more day of nutrients. I Topped off the Reservoirs and adjusted their PH's to 5.8 as usual. I cleaned out the tent today as well. I can't wait to harvest these buds they are looking great. 1/14 Today is Flushing Day! I will flush them for about 6 days which is very fairly long for a typical DWC grow. I will only PH the water from here on out. 1/15-19 I Flushed these plants while maintaining a stable PH and humidity the best I could. The water level is not important during this because without nutrients you don't need to worry about ratios as long as you just keep the PH stable you will be fine. With a longer flush like this one, you should expect to see death in leaves its ok. I only did this for life reasons, I suggest a 3-5 day flush in DWC. These plant's Trichomes matured fast and harvest time approached quickly. The smell in the tent is very potent and gloves are going to be an absolute must on this chop! I will be hang drying the plants inside the dark grow tent with ventilation to maintain humidity levels. I don't personally have a preference between a slow or fast drying process. This time I will be looking at 3-5 days of hang drying before chopping them into jars for a few weeks of cure using Boveda packs. I'm very pleased with the bud color and smell even though the overall weight will be less than desired I will be growing this strain again immediately. There isn't too much more to add to this week other than the grow is complete and the Dry/Cure process is all that is left. Be sure to look out for the harvest update with the final weight and smoke test! _______________________________________________________________________ Feel free to leave comments/questions below or give me any feedback to improve my diaries. If you like this Diary follow along and check out my others as well 😎

Every plant in garden day 56 Noticed yellowing mid week 7 don’t think it fade having some ph issues my run off is 7.2 after flush then watered again still up at 7 so hopefully going to water at like 6 6.1 from now till it goes down growth continues tho some buds getting big ☺️

Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Seedsman, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! WOOOOOOOW, odori e colori davvero incredibili... MANCA POCO!!! Grazie a tutti per il supporto ❤️🍀🔥

1. Strain-by-Strain Overview Permanent Marker (The Titan): Experiencing a massive explosion in flower mass this week. The tightly stacked nodes analyzed in previous weeks have officially fused into towering, ultra-dense colas. The calyxes are swelling heavily, confirming its status as the primary yield driver of this run. Strawberry Banana (The Resin Queen): An absolute frost machine right now. While the bud structure remains lighter and more aerated as expected by its genetics, the trichome coverage is outstanding. The density of resin glands per millimeter is staggering, making it an incredible gourmet profile. Super Boof (The Terpene Champion): Developing an incredibly sweet, loud, and mouth-watering aroma. The flower structure is rock-solid and highly resinous, perfectly balancing heavy production with elite olfactory qualities. 2. Environment, Inputs & Strategy Adjustment Nutrition Ramp-Up: Stepped up the organic input regimen this week. All tailored KNF (Korean Natural Farming) inputs have been increased to 4 ml per Litre to support this critical cell-expansion and ripening phase. Liquid Bio-Availability: Maintained the immediate "Mix & Go" liquid delivery protocol to feed the living soil directly without stalling the Lacto Bacillus (LAB) or risking calcium precipitation from the WCA. The plants are converting these pre-digested complex sugars and minerals into pure bud density instantly. Snaescence & Rinsing: Natural fading is progressing beautifully on the lower fan leaves. The progressive nitrogen depletion is allowing the plants to naturally flush their tissues, ensuring maximum terpene purity and zero harshness on the final smoke. I also increased the dosage to 4ml/L for all my KNF nutriment

Sorry I have not updated in some time. A lot of the missed time was me recovering from hand surgery. In this time, I was not able to move plant and tend to them. Then, at the start of the new year, GD was acting horrible. It would allow some updates and then reject others. Luckily it was still allowing harvest updates. The flower has a strawberry berry smell. Strawberry flower is my favorite. It is super frosty, and smells delicious. I did lose half of the canopy during flowering. As it was too close to the fan. Causing it to l wind burned a lot and ate away at the plant as it grew. She did alright for what I could do 1 handed. Thank you Spider Farmer, Athena, and Herbies Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Prevista perdita di peso tra il 65 e 75%

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme

Buenas noches familia, finalizamos el primer mes de esta farm cheese, esta variedad está colocada básicamente por gusto de mi paladar, me encanta el sabor de la cheese y a sido un capricho. Volviendo a esta genética, vemos cómo la cheese a tirado unas preflores majas y unos brazos curiosos, es de las variedades que más huele de lo que e cultivado así que ojito gente que recuerdos tengo bastantes en cuanto a el tema olor-cheese. Ph controlado en 6.0 humedad por debajo de 50% temperatura siempre por debajo de los 27 grados. Poco más os dejo unas fotos y vídeos para que podáis comprobar que la farm cheese esta más que viva 💨💨💨 buenos humos.