The Grow Awards 2026 🏆
Likes
Comments
Share
Super frosty smells amazing fattening up fast
Likes
11
Share
@Jokey4
Follow
Explosion of leaves from the 15th to the 17th day, then on the 18th day we start to see "normal" leaves, and on the 20-21st day we have hope that it will become a normal plant 😄
Likes
7
Share
Couldn't be more happy with these results. Highly suggest using this supersoil ;) Happy uealthy plants
Likes
27
Share
@phobic94
Follow
Het is mijn eerste kweek, voor mijn eerste keer vind ik dat alles vrij goed is verlopen. De white widow van dp heeft zeer goed gepresteerd en heeft mij een mooie oogst bezorgd. Na het drogen geef ik een recensie over de smaak en geur.
Likes
132
Share
@rhodes68
Follow
12/7 Week 4 still in strong veg no flowering signs. Reduced feed to 600ppm and upped amount to 0.5 gal to control runoff PPM/EC as it was just too high at 1400-1700 ppm and seeing some tiny white tips on new grow growth. Still on all Grow will add some bloom when I see some hairs multiplying. Increase nuets when runoff checks out ok Ended ponytailing and just doing some leaf tucking as always After some thought and a bit of reading I decided to do this as a root drench and fertilized flush to remove all salts from the pot. @0.5 gal ea 5.8PH CT Grow AB / Kangaroots /Fish Sh!t with @50% runoff at 900ppm (unadjusted 700ppm adjusted) in / and 985ppm out. See how things look in 24 hours. 12/11 Hooked up a reptile heater (60w) in a reflector directed at plant area on 24/7 to level out heat in lights off and give them more IR. They are really taking to it 12/12 Feed adjusted to 850 watching for white tips
Likes
16
Share
@DrShotzUK
Follow
All round sugarlato is looking like the healthiest auto I’ve grown so far. The smell is phenomenal and I will defiantly be using green house seed co for every grow I do. Genetics are 12 out of 10. Can’t wait to taste the end result!
Likes
3
Share
Likes
10
Share
@Roscio99
Follow
hello beautiful ones, they managed to enter flowering!! everything is going smoothly apart from a few insects... I think it's normal when you do them outdoors. They have been flowering for a week and continue to grow every day! DAJE ROMA DAJE
Likes
13
Share
@goeser
Follow
All plants growing well , buds developing well. Fat banana much stronger against the feeding then the Bubble Kush Auto, but still both growing well and dense buds .
Likes
116
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 111821 😽💨Things are going pretty good considering our terrible luck with all things autoflower lol..I think we stopped the calcium deficiency from spreading..these little plants are drinking a ton, 3 gallons every 3rd day..using autos to dial in a tent was pretty hairbrained but things are going pretty good..the MarsHydro fixture is itching to get some photoperiods under it..I honestly can't wait!! Thanks for stopping by grow fam and happy harvests!!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
21
Share
Day 78, I switched plant #2 to an all PK diet with FloraFlex Full Tilt. She’ll take up the whole 3.5 gals of nutes by Wednesday. I’m then going to begin my 3 day flush Wednesday evening. And I will chop her on Saturday evening. I also took a little sample nug off plant #2 just want to compare non-flushed to flushed weed. Also see how much they shrink in size. Day 79, Plant #2 is on schedule to start flush in 2 days. And I will give her the chop this coming weekend. Going to try a ice flush using frozen water bottles to see if I can help bring out more color. The other plants #1 and #3 are still a two weeks or so away from being chopped. Day 81, started the 3 day flush on Plant #2. And took some more photo shots of her buds and a 360° view video. Day 84, Plant #2 got the chop. Wet weight, before light trim and removing large stems is 760 grams!!! I will update once they finish drying, and then again once I finish the trim and about to jar them for cure. Plants #1 & #3 are still flowering, probably another week or two before they are ready to be chopped.
Likes
6
Share
Okay so I’ve been slacking a bit on the grow-diaries, only because I’ve had a lot going on and also because I don’t feel obligated to do so because this isn’t a sponsored grow. It’s been nice to have a little break but I think I’m ready to come back at it full force again. These girls are living their best lives, they are all the same age and they are all thriving. Floraflex nutrients, as well as some Silica, Regina-root, and a trichome enhancer called “Grease”!! Seems like the real deal. Watering every other day and let me tell you these girls are very thirsty. Defol as needed! My new HLG Blackbird lamp fixture is out of this world. My 3 autos that you can also find in my profile absolutely blew up. I typically fit 4 autos in my 3x3 but now it’s essentially one Purple punch from Fastbuds and I had to cram 2 more inside basically because they are going crazy. Unfortunately I had to move them from under the blackbird and put them under a HLG350R and they are still going crazy. Basically what I’m saying is HLG Lamps=Crazy growth and amazing lamps!! HLG has a lifetime customer! That’s it for now but check in next week to see the progress! Thanks for tuning in. Until next time and as always, Stay Smokey my Friends!!! 💨💨💨 Instagram: Virginia_nugz_540 Sponsors: Horticulture Lighting Group HLG-Blackbird HLG-600RSpec HLG-350R Diablo (X2) Discount code: Virginia_Nugz Petra Tools LTPRO 2.0 Backpack Sprayer Trimbag Standard Trimbag Discount Code: Virginia_nugz Fastbuds Fastbuds Genetics Goat and Monkey Hydrokulture Store 4x4 Gorilla Tent
Likes
10
Share
Flowers still growing, i will let one more week or so before harvest. Giving water only. Flowers are very dense like rocks. Smell is amazing, like fresh sweet fruity gas :)
Likes
6
Share
From what I've learnt since, by defoliating and not ensuring sufficient reserves in the Substrate after taking their reserves from the bigger fan leaves at strip, this left 1 pheno more hungry than the others, but still all 4 suffered to some degree which was really disappointing. I was too busy enjoying the festive period with family so its a good enough excuse! ;)
Likes
8
Share
Okay so, dried my harvest and it's been curing for the last couple of weeks. Not to my surprise, this was a relatively low yielding harvest (still). The quality of the cannabis is excellent and already has a really smooth finish. However, in the future I would love to add some additional supplements in the flowering stage to boost her chances of being more fruitful. One thing I realized a little too late into flower, was that I should have added a larger quantity of fishbone meal earlier than I had and I believe that in general the plant could have used a P/K booster (which is what I am looking into for my next grows, along with humic acid). The plant filled in nicely but I would have loved for the internodal stacking to be greater and more dense.
Processing
Likes
13
Share
@MG2009
Follow
Looking good can't wait to see mystery cookie offspring 06/04/2018 She is sparkling with trichomes frosty as .... Well frost. Growing for seed but will use weed for concentrates ( hashish)😁 06/06/2018 Begin 11.5 - 12.5 light schedule, try to get buds fattened up looking for heavy crop of seeds. Also looking at trichomes for maturity, get as many ripe seeds as possible. Ps.found first fully ripe seed today!👍
Likes
8
Share
@Exr_300
Follow
Marshydro grow light ts1000 Moved them inside to finish bugs are a pain lol out doors in doors they seem happier
Likes
77
Share
So this week the little gelatocake is on week 8 and is really starting to eat herself now, full of trichomes and smells like tutti fruity chewie sweets. Last week of nutes for her then mollases only. Week 7 for the othere gelatocake and shes starting to fatten up now as well as fade also. Babys have got big since re potting I will.bend them over later. Sherbert mimosa are still taking there time I think they are starting to get bigger 🤔🤣 I Will keep you updated lol. Happy growing guys 👌💪💚
Likes
9
Share
This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.