Likes
Comments
Share
Gracias la equipo de Super Sativa Seeds Club, Marshydro y XpertNutrients sin ellos esto no seria posible 💐🍁 Lava Freeze: Con el nuevo cruce de Friesland Indica (M33 para los cultivadores de la vieja escuela) con Lava Cake, ha nacido una nueva híbrida muy sabrosa que te pega fuerte y te deja colocado. En su día, la Friesland Indica original, alias M33, alias Freezeland, se hizo inmensamente popular en América del Norte. En Canadá, se convirtió inmediatamente en una joya entre los expertos de semillas de cannabis. Fue elogiada por su productividad, su efecto y su increíble sabor. Friesland Indica era también muy robusta y capaz de soportar bien el duro clima exterior de Canadá. Esto la convirtió en una variedad recurrente para muchos cultivadores comerciales clandestinos canadienses y todavía se puede encontrar hoy en día en muchas salas de cultivo canadienses. 🚀🌻 Consigue aquí tus semillas: https://dutch-passion.com/es/semillas-de-marihuana/lava-freeze 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Buena semana, los cogollos están engordando que da gusto, las plantas estan totalmente cargadas de resina hasta en algunas hojas exteriores. Se comen todos los nutrientes que da gusto, comienzan a mostrar alguna carencia en la parte inferior de la planta lo que es una buena señal. Continuo con las dosis de nutrientes recomendadas por el vendedor.
Likes
33
Share
It is what it is. Little flowers coming along I guess.
Likes
10
Share
@JBOrganix
Follow
Lost a ton of overall weight from massive overfeeds. She still smells incredible and already smokes real nice. I'll post a legitimate report on everything once she cures up.
Likes
1
Share
Processing
Likes
81
Share
I received my Mars Hydro lights and they helped a lot. 2 TS-1000's. I supper cropped some of the 12/12 from seed and it looks like something trampled through the garden. Lol. The rest are really stretching now. I hope I the larger ones don't get rootbound. 🤞😁😁😁
Likes
76
Share
@BB_UK
Follow
Took a while to get there but OMG little note quick! So I started her in a 1 litre pot and stuck her on top of a 1.5L Pepsi bottle with the top chopped off! And she yielded heavily for that amount of soil a whopping! 224.63 wet weight so can’t wait to see what she holds dry because them buds were like boulders! So dense! I will be back to document her dry weight and then a couple of weeks later with the update on the smoke report! But I know it’s going to be so loud! She has deep pungent aromas like gassy and sweet! She’s going to be a powerhouse! She was a little over as today a banana developed but that just tells me “well done” timing just right! She’s a little long for my taste of auto but I do suggest anyone grow her she’s amazing! In the end!
Likes
29
Share
Day 34: Watered with first dose of flowering nutrients (1ml B, 1ml SR). ***I’m gonna break character here for a few mins. If that messes with anyone’s head because you are so deep into the storyline, then you can just pretend this is the director talking. I really wasn’t liking the look of the plant. There was loads of leaves with big very long stems. If it was earlier in the summer I would just put it outside and start another one inside. I don’t have that luxury so I’ll just have to see how it goes. I done some serious defoliation, removing more than 20 leaves. I’m not holding out much hope for a big yield. Day 37: Watered with just PH’d water. Day 39: Watered with Nutrients (1ml B, 1ml SR) ***Character break again. I saw the plant today for the first time in six days. More leaves are after growing big long stems. The few flowers on this plant are topping away nicely. It looks like 3 good bud sites maybe and 2 smaller ones. I have a Rhino Ryder in a 4ltr pot growing next to this Skywalker which looks like it will produce a bigger yield. Either way we have to just see what happens. I’ll hand you back to Luke now for the rest of the grow. Day 40: Continued to use the Force to make the plant grow. This place is really starting to remind me of my time training with Master Yoda on Dagobah. Removed a few leaves with long stems.
Processing
Likes
20
Share
@Hawkbo
Follow
Couple got a little burn I think maybe a little too much soil in there with the coco on top of the light feed? I got all the final pots filled up today they will go in 3 gal bags either today or tmm. It's a Greentree pro ultra coco/perlite mixed with some roots organic soil about 70/30.
Likes
26
Share
@Gzuscamp
Follow
This is my first hydro grow and first time with clones. I have a few semi successful outdoor grows under my belt but the weather (hot AF) and caterpillar apocalypse (lost a beast of a plant and the tops of most others) last year are forcing me inside. Reservoir is an hdx 27 gallon tote with 15 gallons of actual water capacity about 1/4” under net pots. Attached to 1/4 hp active aqua chiller (overkill but got a deal and am in so cal; last years consistent 100+ temps ravaged my outdoor grow and can even make indoor temp regulation difficult) with two 5” and one 4” air stones in main res and one 4” in a 5 gallon top off res (not part of the system until/if I need it) attached to two 15L/minute active aqua air pumps. I wanted to have a bit of a barrier between the ambient temps inside the tent (rest of the room is a/c controlled) and the actual reservoir so I built a base to set the tent sans bottom putting the top of the res at the floor of the tent. This also raises the reservoir off the ground and hoping it will save some back aches once scrog comes into play. This also frees up 16” of vertical space inside tent and although I intend to scrog it should help as a buffer with temps and I won’t have to worry about light distance since plants are at floor level. To keep as much unnecessary heat out of the 4x2 tent the spider farmer light ballast was removed and relocated to outside the tent which I’m glad because during testing the ballast and light are each producing 120 degrees. Half of that is outside the tent allowing the temps inside the tent to stay about around when room temp is about 78 (a/c off but weather is fluctuating) with a small fan at base level and a 6” clip on fan for higher up. Reservoir will be 66-68 at all times thanks to the chiller. For ph management I am going to be using a torus hydro perfect ph (35 gallon). I’m hoping their claims aren’t just hype because they say it removes H+ and OH- ions to allow the ph to maintain 5.8 - 6.2 ph (without any additional buffers). This small fluctuation allows all nutrients to be taken in while a stagnant ph will prevent certain nutrient uptake hence a more complete usage. These are claims among others they made, let’s see if the science is legit. Unfortunately this being my first hydro grow I have no standard to base this off, but if I don’t have to worry about my ph that’s one less worry. Nutrients will be GH flora trio and cal-mag plus hydroguard. Not sure about additional additives, want to keep it pretty basic but suggestions for this nute/strain combo would be appreciated. I was intending on growing wedding cake or venom og but cake was sold out and venom didn’t look great so I ended up coming home with two gelato clones from universal nurseries. I’ve always liked this strain but wanted the cake because I’ve read it’s highly resilient. What I was not expecting was that these would be rooted in neoprene. I’m new to hydro and aside from the research and reading throughout my grows I usually overlooked neoprene. I guess it could be better than the rock wool as it shouldn’t leach and mess with ph? They are surrounded by hydroton and will be hand watered until roots make it to water. Update day 6: I went against my better judgment and initially painted my lid for light leakage. Ended up dumping my entire reservoir two days in because it was full of paint chips (even though it was formulated for plastic it still chipped off in high volume). Used a drill pump from HD, worked well as the intake is a 1/4” pvc tube I could suck up the paint chips and the water, but DO NOT USE to transfer anything but waste water as the output contained grease from the pump! Got a new lid and will just be using panda film for light blockage. Added a small humidifier because rh was in the 30-40 range, now temps and rh are consistently 70 degrees and about 65%. Nutes are 1/4 strength except calimag due likely to stoned math... Plants don’t seem to be minding so I’m not trying to sweat it much. Slight upward drift in ppm and ec as water is taken in or evaporates and ph is slowly swinging in the range torus hydro said it would so that is a success as I have not used any buffers. They claim it is more effective when it can directly interact with a root mass so it seems promising. New growth sprouting all over but no roots have made it out of the net pots. I went with 6” hoping roots will branch laterally exposing move root mass to the air gap once developed. Started noticing slight yellowing of leaves day 4 and some drooping (due to low rh as they perked up after adding humidifier) so I went from 50ml top feed daily to 100ml, also turned light down to 15% and everyone is happy.
Likes
18
Share
@CANNASIM
Follow
So far so good, we are at the 5 veg week, the hulk berry is shooting up many pre-flowers. The RO water has been great, using this clean water is much better and you see a strong difference, and you are able to dial the ppm/ec without the interference of random stuff plus the chloride and fluoride that comes with tap water in my region. This version of the Hulkberry i have is a bit more on the sensible side of things, se feels already if you keep touching her, also better not to nuke this strain with nutrients from what i have seen so far, so I’m going easy on her. The other two strains form Kannabia, one been the unstable version of Purpple Kush, got many aliens already out of some seeds, and ironically a Lucky dip, mystery strain is extreamely vigorous and nice to work with. A side from that i have chosen two HLG QB324 V2 quantum board with a Meanwell 320H-54a driver to build a DIY light, with passive Heatsink and 90 degree optics to power the flower tent, so basically i will move this plants to the other tent in a week or two when i get this build. This is a huge step up for me since i was using a generic Chinese blurple led. My setup changed a lot and i will try to keep things consistent, i may have some adaptation going on to drive all this new perpetual style grow.
Likes
29
Share
@THCeitor
Follow
Ya en la cuarta semana podemos ver mayor cantidad de pistilos sobre todo en la planta mas pequeña y la que de seguro estará lista antes para cosechar, la R.S.Banana #2. La R.S.Banana #1 muestra un crecimiento mas vigoroso con un tallo muy ancho y aunque ya muestra algunos pistilos, esta tardará mas que la R.S.B.#2 pero será mas productora. En relación al LST es una tarea que se realiza a diario.
Likes
26
Share
After 10 weeks and 5 Days these beautiful plants are ready to harvest
Likes
9
Share
These our great and quite uniform genetics! Lemonpaya get the beans
Likes
13
Share
@Oyziphar
Follow
The plants are doing very well. The plants are not very homogeneous. Neither in height, nor in flowering time. The plants got their first week of cold nights. Let's wait to see if beautiful colors emerge. As last week, the 4 autopots of 24 l., (each containing 4 plants), received a nutrient solution of 0.5 liters per pot every 5 days. The plants receive the rest of the water through the autopots. I forgot to take pictures of plant#14... 😩
Likes
3
Share
Processing
Likes
8
Share
@Dunk_Junk
Follow
Her first week above ground! I didn't do a very good job with this strain last time 😏 Lets see what happens this time.
Likes
12
Share
What can i say the grows going well, other than the CK bud being 2 weeks behind the haze and sad! :)
Likes
3
Share
@4F1M6
Follow
Shes booming through the stretch! Got branches rowing up great as she fills right out. Did a big defoliating of most the leaves under the first net. Allow some air flow through the under skirt. Did a preventative treatment using dr zhymes. Than gave her a good shower to wash off any residual build up. I'm just starting to see pre flowers coming in at the nodes. So she will still have some stretching period to go. I'd say atleast another week of stretching out and filling up my net. Before I start seeing those white stigma pom poms coming in at the bud sites. Lets see what this lady can do. Until next update. Happy growing and stay lit fam.