~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

I must say, I really liked the output from my new light. I honestly think it really improved my grow. It actually reminds me of when I changed from growing under a CFL to LED. It really stepped up the quality of the cannabis I am harvesting. Now that I have cut the other two pla

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 10/21/20 😻 We're documenting a day early because we'll be gone for a weekend camping trip...The plants are progressing beautifully and perpetually praying, they're absolutely loving this new MarsHydro! We decided to move the light from 24" to 30" to try widening the nodes a little before dropping back to 24", we're in unamended Promix so we typically start thinking about feed this week but being autos we're going to take it slow and wait on color ques before making that move (probably next week for sure)...thanks for reading and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 10/25/21 😺 We gave all plants a very, very light feeding (<3ml/gal) to see how they tolerate it, its super early but a few were already beginning to wash out ..We started bending plants today, low stress only for these girl and everything looks great so far! This MarsHydro is intense, the node spacing is extremely tight on all plants and growth has been really steady (especially these last few days), we couldn't be happier! Thanks for reading and love all around growmies!! 😻 ❤️💡🌱.. ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 of these lights can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

The grow went amazing started off what was supposed to be a auto GSC strain but didn’t auto flower which is no issue at all so went ahead an let her veg out an get the lst done that i wanted done on her she was showing pistils by week 8 veg letting me know she wanted to flower but some areas had a bit of catching up to do which turned out amazing. Got almost all the branches the same size to produce equivalent bud sizes throughout the whole canopy. During flower stage 2 weeks in started giving her a Pk boost of incredible bulk 1/2tsb per gallon. An did the GSC so good for flower stage she bulk up nice an the trichomes came in heavy. Total wet weight came in at 2.5lb stump was 1.5in circumference. I will update with finish photos an how the smoke was after cure. GSC currently being cured with love 63% Rh at 70 degrees temp. Thank you viewing an happy growing everyone!

Hello. Just a quick update as I didn't do much. only watering. Mid 7th week, everything going fine in the tent, they are beginning to make some resin and smell, Gave some microelements to see if the intervenal discoloration gets better. It didn't got worse in the last days anyway so I'm positive it won't be much of an issue in the end. Ciao!

10/20/2021 - Day 32 - finally some pistils popping. Time to move all these girls to flower nutes. Got a lady bug named Senua to kill all the thrips. It is her sacrifice. 10/25/2021 - Day 37 - she’s finally stretching a bit. Was really crowded for a little bit there. Thrips seemed to have disappeared. Will do a defoliation in a few weeks.

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

I'm finally ending this strain and for a minute I had posted the last 2 weeks as a different name... I'm an idiot. From now on, its all going to be different strains so I won't need to keep too much track on what I'm growing. I have several plants right now and will be doing more videos on my youtube channel. PROUD_TO_GROW_LOUD Bros pro grow show. YouTube and Instagram have way more than here. Check it out!

I'm finally ending this strain and for a minute I had posted the last 2 weeks as a different name... I'm an idiot. From now on, its all going to be different strains so I won't need to keep too much track on what I'm growing. I have several plants right now and will be doing more videos on my youtube channel. PROUD_TO_GROW_LOUD Bros pro grow show. YouTube and Instagram have way more than here. Check it out!

I'm finally ending this strain and for a minute I had posted the last 2 weeks as a different name... I'm an idiot. From now on, its all going to be different strains so I won't need to keep too much track on what I'm growing. I have several plants right now and will be doing more videos on my youtube channel. PROUD_TO_GROW_LOUD Bros pro grow show. YouTube and Instagram have way more than here. Check it out!

Day 44 Time of re-crop and scrog! 🤪✌️ Day 49 Changed to 12/12

Week 6 Day 36 Ladys doing good just trainwreck showing some signs of stress, maybe the soil is to hot. She got twisted leaves on the top. Light is back at 100% again cause the other lady's are healthy, I thought it was Lightstress but now, I think it's a root problem or a pH. I am watering with just pH water since last week. They should got enough nutes till harvest. Right now I can't do anything, and this is boring 😅. Can't wait to test this Bluedream 😍 my favorite strain. But also the Cinderella Jack from Dutch Passion, she is extremely bushy but the smallest right now. She's started flowering since 3 days, I hope she gonna stretch and get big Day 38 Trainwreck is a monster she's so huge, but got that stress with the twisted leaves on the top. All lady's showing a little sign of mute burns but it's OK. This should be gone in 2 weeks when the buds starten to fat up. Day 42 Dimmed the light at 60% again and raised her 20 cm up All lady's showed signs of lightburn or the soil is really to hot. But trainwreck recovered a little bit. Stretching is over just Cinderella starting now she's a late bloomer but she gonna be huge, her mainstem is the thickest. Day 45 Ladys fatten up the buds now next. Cinderella stretched so much in the last 3 Days, I think she gonna be the biggest. Unfortunately I haven't enough place for her to get the most potential out of her.

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks New week in marshydro set-up The week 5/4 plants doing great I added a extra strain in the mix the Seeds Mafia Headshot sadly only 1 survived better then nothing . I will probably start flowering phase next week depending how they grow Probably come flowering time Black berry moonrock imperium X and headshot will be put in the 100X100X180 with the TS-1000 so they can veg some more 21/10/21 Couple of days ago i catch some ladybugs to put with my plants but didn't see them but there finally reach the plants woehoe Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

Week 20, week 10 of flower started 10/18 and the lights are now off until next run! I'll be cutting them down later tonight! So blessed to have gotten this far! I'm at a loss for words after that, happy growing everyone ✌️🍀✌️ Harvest update to follow........