Once again, I welcome you back to my summer grow🙂💚 Still adding more bloom and PK boost to the nutrients mix and also bumping up the light a bit 😎🤙🏻 I started to add UV/IR for one hour a day, mainly before lights go out 🙂 Happy growing y’all 💚 ------------------------------------------------------------------------------------------------------- SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

Had great results, especially when i upgraded to RO water.. if theres one thing i could of changed it would of been using the reverse Osmosis water sooner. The rest of the grow was pretty easy, didn't even plant train as this was suppose to be a hassle free run. It was just that. Some good genetics from seedstockers too. Good stuff!

Start of week 9, getting fat

Coupe effectué sur les feuille déformé et sur la tête principale pour effectué une division. Toujours aucun signe de parasite ou de maladie.

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

🌱 Day 57 - Start of the Second-to-Last Flowering Week 🌱 Hello, Grow Friends! Today marks the start of the second-to-last flowering week—Week 9 overall, and Week 5 of flowering. 🌿 I’m getting more and more excited as my first grow nears its end. As I approach harvest, I’ve decided, based on my research, to stop feeding nutrients and stick to just pH-adjusted water for the final two weeks. 💧⚖️ Watering Routine: I’ll keep the same watering schedule—1 liter every two days, which is about 10% of the pot volume. 🌱💧 This should be enough to flush out the remaining nutrients, ensuring a clean finish for the plant. Temperature & Humidity: The temperature remains stable between 19-23°C, which I believe is ideal for this stage of the grow. 🌡️🍂 No more high temperatures to worry about! The humidity is fluctuating between 45-58%, and I’m keeping a close eye on it to stay below 60%. 💧🔍 Everything seems on track for now. 🌿 Plant Health & Growth: The plant still looks very healthy overall. 🌱💪 However, I’ve noticed that in the past three days, there haven’t been any visible changes in the size of the buds. 🤔 It could just be that I’m not seeing the growth clearly, but the only noticeable change is the daily opening of new flower calyxes. 🌸 Harvest Preparation: I’m already getting my equipment ready for drying after harvest. 🛠️ Once it’s time to cut, I’ll be hanging the plant to dry for the first 10 days. 🌿✂️ I want to make sure everything is set for a smooth drying process. Stay tuned for more updates, and as always, daily photos of the plant will be posted! 📸🌱 Day 62 - Last-Minute Decisions with Urgent Changes 🌱 Hello, my grow friends! Due to the trichome pictures I took on Day 61—which you can check out too—I’ve made an unexpected decision to harvest my plant a bit earlier than planned and make some changes. 🌿 Watering and Flushing: The last time I watered was on Day 61, using all the usual nutrients at the doses I mentioned before. But after seeing the trichome pictures, I decided to start a light flush today. I gave the plant 4 liters of plain water to begin flushing and will now only water lightly on Day 64. After that, no more water until harvest on Day 67. 🌑 Dark Period: From Day 66 to Day 67, I plan to keep the plant in darkness. I’m not entirely sure if this will make a difference, but I’m curious to try it out. ✂️ Defoliation: The plant is doing well, and I’ve done a thorough defoliation. I removed all leaves that aren’t sugar leaves or directly attached to the buds to improve air circulation and reduce the risk of mold as I approach the end of the grow. 💭 Trimming Decisions: I’m still undecided about whether to do a wet trim or a dry trim. Based on what I’ve read, especially regarding the yield from trim, I’m leaning towards dry trimming, as it might give me more usable trim material. I can feel the plant entering its final phase, and I’m getting really excited about the results and what the next few days will bring. Remember, I post a video update every day. If you have any tips or suggestions, I’d love to hear them! Until next time! 🌱

We’re done! Thanks a lot again to Zamnesia and Greenhouse, next big shoutout to Spiderfarmer and Biobizz. For further updates and more stuff hit me up with a follow on IG @herrnlubitz88 Stay tuned for next run!

8 week harvest this run

Day 114 (f52) update: Kosher Dawg is doing pretty good! 😀 She showed nute burn problems a few days ago so I diluted the mix a little, otherwise everything is going well and the buds and small bud leaves seem to be swelling and full of resin 😋😀 ==> Now it is clear this will be a very low yielder, already the internode distance is rather long for an indica but also the buds are very small. -> Low yielding kush crosses often give very good quality flowers so I am hyped!!! 😁😁😛 >>> Guessing another 10-14 days till harvest 😍😁😛

Day 1 It seems like she's a little slow but the smell finally starts to come. No big changes for the rest. I'll probably need to feed her tomorrow. I dropped the temps a little bit. No other changes so far. Day 2 Feeding time! Up with the nutes to 75%... Only the Boost is at 100%. Changed the values above as well :) Day 7 Feeding time. Nutes were at 85%. Boost is at 100%. Changed the values above.

Well I finally got the new pot pro system up and running with a little spare time today. The plants are of to a great start although I can already see there is going to be a learning curve on the watering and the need for a second bubbler manifold and pump. Merry Christmas!🎁🎄 🎅

26 giorno di fioritura, le ragazze stanno crescendo bene nessun problema riscontrato struttura resistente ,lampada led bavagreen 480w a 40 cm dalla cima ,soluzione nutritiva N20P20K20,TEMP-24 EC 1680 PH 6.0,provero ad aumentare lentamente EC della soluzione ,si accettano consigli per aumentare la resa se possibile

The substrate maybe got a little hot after the last top feed so won't be adding any more probably this grow! That's my best guess for the mottling on the leaves and crispy ends - as the ends are curling up rather than straight. That's my tip for telling whether it's over- or under-fed or another issue. I'm pH testing every drop she gets (and giving between 6-6.5), so I don't believe it's lockout from a pH issue. She's getting a proper wet-dry cycle. Must be too many nutes. I flushed her yesterday and will continue with straight up water. Hasn't affected overall growth though- the buds are starting to bulk up, trichs continue to show themselves, and the smell 👌👌 it's like honey and citrus. Veeeery excited for this one ;)

Added video on may 16 for a good look May 11 We are now almost at the end and I must say it sparkles more than anything else I have had so far I specifically took photos and the video using only the light from my phone. Despite the burn marks, she's a real sight to behold. She makes it difficult for me to take photos with a flash because she's covered in trichomes that simply bounce the light back. The buds look great and healthy and are now in their final stages of ripening. I hope everyone enjoyed this cup. I've been through thick and thin with this plant, and I really enjoyed it.Regardless of whether I win the cup or not, I'm already a winner with this beautiful plant. It smells great, and I'm already looking forward to smoking it. Thank you all for your attention. This is the largest diary entry I'll be making, in terms of pictures. Of course, there will be more pictures and videos until the end of May. She will now receive advanced nutrients as prescribed and Plagron's Green Sensation for the rest of the time. In one or two weeks I change the water and just let them stand in normal water. THANKS 🙏🏻🔥😌❤️

This is the biggest auto and best to date of my doing she is very exciting to watch 💜🍓🥛 🌱 I just started giving all my plants nutrients so we will see how this works out now 👌😂📚 happy growing fam

Die Woche ist gut verlaufen, alle samen aufgeploppt und sind gut am wachsen

UNOS 14 DIÁS DE FLORACION, EMPEZAMOS CON EL BIG BUD, Y NUESTRAS PLANTAS ESTÁN RADIANTES DE ENERGIA

l essiccazione è avvenuto in tenda con una temperatura di 17 gradi e un umidità del 55 giorni trascorsi 12 poi ho messo in concia nei barattoli in vetro al buio senza infiltrazione di luce

In the ever-evolving world of cannabis, enthusiasts are constantly on the lookout for the highest quality products to enhance their experience. Whether you’re a seasoned connoisseur or a curious newcomer, understanding the different types of cannabis products available can elevate your high to new heights. Among the most sought-after options are Grade A+ products, including shatter, hash, and more. Explore these premium offerings with https://t.me/cerianberigam a trusted supplier on Telegram, ensuring you have access to the best cannabis products available. Telegram contact:https://t.me/cerianberigam

Week 7 seems to be going fine from my house and then I go to the grow 🤣 well fukc me I’ve ran into few problems let um get abit too dey for their liking the week leading up to Christmas / gave um a good feeding with week 7s nutes and peeled back abit of the fan leaves to get more light around , humidifier broke on us didn’t notice for 2 days so tent was 70 percent humid when gone to check , new humidifier replaced and back on track as I said earlier peeled back a few fan leaves think maybe a few too many plants started showing signs of stress soon after again these are autos and I think it could of stunted if not heavily affected the end product also we noticed about 3 weeks into this grow we had way too many plants in the tent starting to see the effects off that now a lot of nonsense on the lower branches and only really the top Lola’s getting the light and the mass , all the same seed bar 4 plants and very differnt plants all in all , definitely not a strain that’s been mastered about half are tall and spaced out and the others are short and very stacked from my own eye I’d say the shorter and more stacked buds will be the ones bearing more fruit the taller ones look very skinny and airy still