Thank you. Gave her a cocktail to help with stress. Added 1st net for lateral support, not so much now, but for later. Blue light is absorbed by photoreceptor proteins called phototropins, which trigger a hormonal response that causes cells on the shaded side to elongate, making the plant bend toward the light. Try and fill this side a little. She is quite big already, just needs to find her stride again after the undue torture. 5 apex stems with 20-30 mini cola, let them develop a little, with the apical dominance shattered, all those 20-30 will all compete with each other as soon as that stretch is initiated. Key to a good stretch is making sure the plant is cycling efficiently, with large ATP conversions occurring lights out. For now, I'm keeping light intensity high. A plant will slow its vertical growth in very high light intensities, leading to a more compact form with thicker stems and leaves. This response is a protective mechanism against light stress, which can damage the photosynthetic apparatus and lead to symptoms like leaf scorching, yellowing, and brittleness. Instead of growing taller, the plant invests its energy into creating a more robust, stress-tolerant structure. Providing plants with necessary antioxidants helps protect the photosynthetic apparatus by scavenging reactive oxygen species (ROS) that cause damage from excess light. UV light exposure can impact the xanthophyll cycle by either enhancing its photoprotective role or causing damage, depending on the intensity and type of UV radiation. UV exposure can trigger the synthesis of more xanthophyll cycle pigments to increase the plant's capacity to dissipate excess energy, but it can also cause direct damage, particularly to Photosystem II, and may lead to a decrease in the de-epoxidation state (DEPS ratio) which indicates a reduced capacity to dissipate excess energy. Plants can respond to UV stress by increasing the synthesis of xanthophyll cycle pigments, such as violaxanthin and zeaxanthin, to improve their photoprotective capacity. UV-induced changes in xanthophyll cycle pigments can be linked to a plant's overall tolerance to high radiation stress. The xanthophyll cycle helps protect against photoinhibition, which is especially important when the plant is exposed to high levels of both UV and visible light. High doses of UV radiation can directly damage photosynthetic components, including the proteins, lipids, and pigments in the thylakoid membranes. Exposure to UV radiation can have a mixed effect on the de-epoxidation state (DEPS ratio) of the xanthophyll cycle pigments. In some cases, UV can inhibit the conversion of violaxanthin to zeaxanthin, resulting in a lower DEPS ratio and a reduced capacity for energy dissipation. However, the total pool of xanthophyll cycle pigments may increase, and this enhanced pool size could provide a greater potential for photoprotection despite a lower DEPS ratio. The xanthophyll cycle works alongside other mechanisms, such as the accumulation of flavonoids (UV screens), to protect the plant from UV-induced damage. Blue light repairs 100% UV-induced damage in plants through a process called photoreactivation, which uses a light-dependent enzyme called photolyase. This enzyme uses energy from blue and UV-A light to directly reverse the damaging pyrimidine dimers in the DNA caused by UV-B radiation, a key mechanism for maintaining the plant's genetic integrity. After carbon, light, water, temperature, and nutrients, the limiting factor of a plant's growth is often its own internal factors or the amount of a key ingredient. Chlorophyll concentration is one such factor, as the amount of this pigment limits how much light can be captured for photosynthesis. Other factors include chloroplast number, respiration rate, and the concentration of carbon dioxide in the atmosphere, as plants are often in a CO2-deficient condition. 60x60x18=64800seconds x 700 = 45,360,000moles. 45DLI Exposure to 165 µW/cm² of ultraviolet-B (UV-B) light for 3600 seconds = 1 hour, a extremely high, acute dose triggering stress responses and protective mechanisms. . The plant's photoreceptor protein, UVR8, senses the UV-B radiation. This triggers a signaling cascade that activates specific genes to protect the plant from damage. In response to the UV-B signal, the plant ramps up the biosynthesis of protective compounds like flavonoids, phenolic acids, and anthocyanins. These compounds absorb UV radiation and accumulate in the epidermal layers of leaves to shield inner photosynthetic tissues. The plant may increase leaf thickness or deposit more cuticular wax, creating a physical barrier to the radiation. The plant will produce more enzymatic and non-enzymatic antioxidants to neutralize the reactive oxygen species (ROS) produced by the UV-B radiation. The plant activates enzymes, including photolyases, to repair DNA damage caused by the UV-B. These repair mechanisms are critical for preventing permanent genetic mutations. While protective measures are activated, a high dose delivered over a short period can cause stress that overwhelms the plant's defenses. Photosynthesis is highly sensitive to UV-B. A high dose can inactivate Photosystem II (PSII), damage thylakoid membranes within the chloroplasts, and reduce chlorophyll content, which lowers the plant's overall photosynthetic capacity. Despite repair mechanisms, high UV-B doses can inflict persistent damage on the plant's DNA. One study found that acute, high-dose UV-B had a greater effect on genome stability than chronic, low-dose exposure. The overproduction of reactive oxygen species can cause oxidative stress, leading to the oxidation of lipids and proteins and disrupting cellular function.

So all the plants are topped twice now and have all took well , my next step will be lowering my scrog net into position and also attach some gutter for collecting my runoff

This is the last week of edge then it's time to flip

Eccoci qui... Siamo quasi alla fine del cultivo, odore, resina e colore ci sono. Attendiamo solo la maturazione delle cime che richiederà 1/2 settimane.... NON VEDO L'ORAAAA... Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️

Gave water at 6.5ph will feed on week 3. I think I've had the light to close. On day 10 pictures you can see the leaves look like there burnt 🤔 or that's what I'm guessing it is. I've raised the light to 1meter it's only at around half power at the moment and showing 21000 lux.

Now into flowering the girls are growing many white hairs and slowly chunking up. Some look urhter along than others into the actual forming oi buds. Looking good.

Meninas cresceram bastante, e começaram a florir, duas aparecerem algumas machas nas folhas

Bueno, empezamos por el final familia. Gorilla girl, me parece una cepa BRU-TAL , ya partiendo de esa base, mi error, creo que e cometido , es poner estos ejemplares en macetas de 5L, que tonto... mínimo recomendado 7L y a ser posible 11L Otro error fue no dejarlas una semana más. pero, escasez. (intentaremos curarla un par de semanas). Cepa con flores muy compactas, hay bastante separación entre nudos pero compensa las flores de verdad. Sabor muy dulzón a mi me recuerda a melón , es un pepino recomendado para amantes de la hierba que llevan tiempo en esto, un colocón muy fuerte, ahora mismo estoy bajo los efectos de esta vaina, aseguro que con cada frase, leo varias veces y detenidamente por que válgame.

No more nutriments

Only keeping damp with water at the moment

I was doing LST, and while bending the leg, I broke it at the very stem. supported with a small bamboo so that the fracture touches, is there any chance of loss?

Last day of the 3rd week and first day of 4th week. Plants bounced back completely from my 10 days absence, and they're praying as always when approaching correctly with Aptus nutrients. In order to prepare them for late flowering, I fed them in previous week with added Fulvic Blast. The very next feeding I gave them beneficial bacteria again with Micromix Drip, before they start receiving the highest ammount of phosphorus. Now I stop with adding any additional nitrogen (Startbooster) as they stopped stretching and they will focus their energy into flowers, so I'm implementing the Topbooster which helps our plants with sugars and brix level. Are you aware of brix and what does it means for your plants health and taste in the end product? If not, start reading and discovering, thank me later 🙏

Started a new 4 plant 100w run. This time we have the spider farmer sf1000. Nicely built . Strains are Sensi double kush cake , blackberry gum, exodus cheese and Strawberry cheesecake

The end of the fourth week. Only 2,5 to 3 weeks to go, since this is the FAST version of Gelato 33 by Advanced seeds. Last week temps were better, so that was a lot better to manage. The smell is a different story. We are trying to combat it as we speak with a double filter which my friend still had from a previous grow. The ladies are performing, however, because this is a monstercrop with many budsites, none of them will be very big. We anticipate a lot of cutting come harvest time. The stickieness and smell (cookies, dough, herbs, spices, gingerbread, vanilla) promise a lot to make up for that hopefully!! The middle plant that seemed to go fastest, now looks like to have the hardest time flowering. Her more advanced stage of flowering as a bigger clone, made it harder for her to return to veg, which she never really did. This seems to make her want to rush to the finish, as she is already browning the pistils. Also these buds seem more flakey, popcorny. As if the many flowers and grapelike bundled growth was too much for her. I put the light a little closer, to help her fatten up in the time she is given. I never expected the two 'runts' to outperform the mighty middle clone, but hey seem to fatten up and age much more nicely. So for now, prelimenary tip: make sure all your plants are completely revegged before flowering and consider that faster flowering species might have some ruderalis ancestry that might siderail all your lighting intentions and remains in flower what ever the growers lighting schedule. So with at least two more weeks for the two outer plants, and well see how many for the middle one, we are going to make them as comfortable as possible the final push of this flowering. Thank you for following and see you next week!!

More precisely comment coming soon.

The stretching phase for all 3 of these girls seems to have finished now and they look to be going full steam ahead into bud production Carried out a good bit of defoliation over the last week to help expose more of the lower bud sites while also still continuing to rotate the pots to help spread the light coverage. The smell is increasingly turning sweeter as these buds develop more and more. 🍭 All on track so far 🤞🏻 ✌️

Doin what it do

The plants seem to do very well they have been suffering from a little bit of Heat stress and too much light intensity the light was at 7 in to the tallest (plant#1) and 17 inches to the rest to see if I could get out bigger buds but was way too close and the plants became way too stress and uncomfortable with it. They prefer temperature of 29 adegrees Celsius as with a humidity minimum of 45 to 50. The lights are currently at 20 inches and they seem to like it much better. The smell is like a citric skunk very pleasant. Day 66 plant #1 starting to become very heavy for their branches very nice problem to have. I'm hoping I can take them down all at 13 week but we will see how it goes. I will only dedicate probably a full week for Flushing no more than that. Thank you for reading I will continue to update and have a happy grow.

Candy has sprouted , and stretched a little too much. Her roots are just finding the solution. So she should get strong fast. Everything is looking good at the moment. Thank you Divine Seeds, Athena, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Delta 9 foliar, día 46 all very nice!!!😎 Muy linda planta 😀. Soy novato relativamente con automáticas y estoy probando un panel L,E.C ( Light Emitting Ceramic) de 150 Watts equivalente a un sodio de 300 Watts👽