I'm 4 days into flower. Topped all the plants nice and even. Then removed all bud sites below the top 4 on each branch. Leaving fan leaves intact. I allowed them to recover for 2 days. Then flipped the lights. Gorilla Zkittles has huge indicia leaves. The plant is growing nice and has no nutrient burn or other defects.

Week 1 day 4 of flower, sorry about the late update. Nothing to report just flipped the light schedule to 12/12 and fed 20g of ecothrive life cycle, kneaded into the top soil and watered in well with dechlorinated tap water. Happy growing.

This week was all about letting her recover from the cloning. Sadly most clones I took did not made it. Just 2 survived my inexperience hands. The good news is that miss Daisy it's doing so well I may be able to give it another try before flipping to flower. I have no rush for this harvest so will probably give it a try. After the cloning and some extra pruning she recovered in no time. The roots look good, just wish the nutrients did not stained them, that way would be easier to sight any root rot if present. 🗓️ Day - 28 ⏰ Hour - 8:30 am / 10:00 pm 🌬️Air Temp. - 74 / 77 💦Humidity - % 50 / 54 ⛽️ TDC (ppm) - 630 / 650 ⚱️Reservoir Tmp. - 73 / 72 ⚗️PH - 6.1 / 6.1 🌿 Looks perky and happy after pruning. She’s is recovering very well. Her roots are showing new white hairs so seams she’s liking the higher nutrients levels. 🗓️ Day - 29 ⏰ Hour - 9:00 am / 🌬️Air Temp. - 76 / 💦Humidity - % 54 / ⛽️ TDC (ppm) - 680 / ⚱️Reservoir Tmp. - 73 / ⚗️ PH - 6.1 / 6.1 📝 Added 4 Gallons of tap water starting feed for week #5 with higher nutrient concentration so ppm should stay around 600. Also added 10 ml of hydrogen peroxide to the reservoir. 🗓️ Day - 30 ⏰ Hour - 8:00 am / 🌬️Air Temp. - 76 / 💦Humidity - % 54 / ⛽️ TDC (ppm) - 680 / ⚱️Reservoir Tmp. - 73 / ⚗️PH - 6.2 / 🌿 Bouncing back very well and has nice new roots coming out. 🗓️ Day - 31 ⏰ Hour - 8:15 am / 9:00 pm 🌬️Air Temp. - 75 / 76 💦Humidity - % 61 / 60 ⛽️ TDC (ppm) - 680 / 710 ⚱️Reservoir Tmp. - 72 / 73 ⚗️PH - 6.2 / 6.2 🌱 Two clones left of Sour Diesel show small signs of root development. Other samples did not made it. 🗓️ Day - 32 ⏰ Hour - 8:10 am / 11:30 pm 🌬️Air Temp. - 75 / 76 💦Humidity - % 61 / 57 ⛽️ TDC (ppm) - 710 / 740 ⚱️Reservoir Tmp. - 72 / 72 ⚗️PH - 6.2 / 6.2 🗓️ Day - 33 ⏰ Hour - 8:10 am / 11:00 pm 🌬️Air Temp. - 73 / 74 💦Humidity - % 49 / ⛽️ TDC (ppm) - 770 / 800 ⚱️Reservoir Tmp. - 72 / 72 ⚗️PH - 6.2 / 6.2 🗓️ Day - 34 ⏰ Hour - 7:30 am / 10:00 pm 🌬️Air Temp. - 74 / 74 💦Humidity - % 52 / 53 ⛽️ TDC (ppm) - 820 / 880 ⚱️Reservoir Tmp. - 72 / 72 ⚗️PH - 6.2 / 6.2 🗓️ Day - 35 ⏰ Hour - 7:30 am / 9:00 pm 🌬️Air Temp. - 73 / 74 💦Humidity - % 55 / 52 ⛽️ TDC (ppm) - 910 / 960 ⚱️Reservoir Tmp. - 71 / 71 ⚗️PH - 6.1 / 6.1

Bienvenidos a la semana #4 😑 😀 🙏 😂 Día 25 (12/06) La planta ha reaccionado muy bien al trasplante 😀 Día 26 (13/06) Se hace topping por encima del 5º nudo, dejando 4 nudos "reales" Es mi primera vez. ¡A ver como sale! 🙏 Se añade sustrato en la parte superior para rellenar y se riega con 1 litro H2O pH ajustado con Biogrow Día 27 (14/06) Crecimiento stopped por Topping Día 28 (15/06) La planta ha reaccionado estupendamente al Topping 😀 Las ramas de los nudos están creciendo muy rápidamente! 😀 Día 29 (16/06) Sigue creciendo. LST a las ramas inferiores. Día 30 (17/06) La planta crece muy bien. Los brotes del nudo 4 ya superan ampliamente donde se ha hecho el topping. Inspirado en @deFharo, hago mulching con corteza de pino para evitar la evaporación por las altas temperaturas que tengo en la terraza. Humedezco la parte superior del sustrato con spray y hago un riego con agua pH ajustado + Bio-Grow. Gracias por leerme y buenos humos!

everything looking good so far, plants are quite healthy check www.sr-organics.com and get a 10% discount on this great 5in1 fertilizer with "UNKRAUT10"

Last week of feeding. Started the flush already, eyes still pinned on the 25th for harvest.

😴

Let the flushing begin! Week 8 went well, this girl packed on the last of her weight and density. She's showing more red hairs and she's got a 60/40 mix of clear/cloudy trichomes.

Girls are coming along well transplanted set 1&2... seem to be loving it....we getting there

Beautiful strain to grow, she ended up. With a smaller size compared to her sisters but she's a big quality lady very frosty and sweet, the aroma of this sticky flowers are super sweet and floral, just so wonderful, I love this strain and I'm glad I have black cherry punch in my garden the 5 of them with the same aroma 🔝 can't wait to croptober

This plant is thriving in its 3rd week of vegetation—it’s growing very healthy and strong!🌱 I’ve applied some Light Stress Training (LST) to ensure all parts of the plant are receiving equal light exposure, and it’s responding beautifully. Midway through the week, I noticed the first signs of flowering! This plant is transitioning into bloom faster than expected, which is really exciting. It seems eager to show what it’s capable of. Now, I’m looking forward to seeing how it handles the stretch phase—I can’t wait to watch it shoot up and develop further.😊

Do-Si-dos auto is doing well. She had been growing really good. I did a solution change on her 2 days ago. I switched her to blooming nutrition then. She is looking ready to stretch and flower. Thank you Zamnesia seeds, Athena, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Well growmies ive been looking forward to the Cream and Cookies 🍪 🍪 🍪 If it werent for my issues earlier in the grow she would have been quiet the plant 👈 Buds are tight and full of frost 👈 She definitely came with the cookies and cream terps , very sweet cookie dough with a vanilla terpy smell 😁Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.. 😍 Would definitely recommend 👌 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 x3 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9👌👌

Feb.9 Diy Growbox: 60*60*160 cm Light: 150w led Light Cycle: 12/12 Soil: CocoPerlite in diy Hydrobucket Extractor: 120mm PC vent Running 24/7 Dear Growdiary, Had to find out how to calibrate Ph meter, stupid manual didn't say how get next Ph setting. Found out on Youtube, Thanks to all tutorial uploaders 👍 Day62: Feeding 780ppm @ 6.14Ph 4L Drainwater 169ppm @ 6.50Ph Day65: Bucket seems to dry up fast Water 2L added

Welcome to GhostGrow Chapter One by PoshGrow! 🌳 Week #9 6th week of flowering. Humidifier was raplaced with dehumidifier to maintain 50% rH. Still fighting some high temperature problems, it was very hot last week and this one so far in my city and the temperature in my grow room(not tent) is high 30s 32s... So i keep my tent open and ventilated with additional standing fan. All strains look healthy, happy and stacking up some nice weight, except 2 strains, Alaskan #2 and Alaskan #5. Alaskan #2 Looks good but still falls behind in flowering time, also looks abit streesed out and with smaller budsites, dont know what to expect to be honest. Alaskan #5 As mentioned last week got some serious Nitrogen deficiency to fight with. No results at this moment... Alaskan #4 Seems to be fastest strain so far, stacked good buds, hard as rock top ones. Started watering only with pH'ed water for flush before harvest, because it seems to go down first of all this grow run, also I started to check its trichomes with mini digital microscope. 90% are cloudy, other still clear. Gonna wait till 10% amber & 90% cloudy before chopping this girl down. Lemon and Blueberry doing perfect, stacking up well, all trichomes are crystal clear☺️ Watering when needed(2, sometime 3 times a week), every other watering I used Fox Farm Big Bloom, Grow Big & Tiger Bloom. Except with Alaskan #5 watering, its more in experimenting mode with increased Grow Big dosage so wont be covering it here. UPDATE! JUNE 28TH. Uploaded 2 new videos and Alaskan #4 picture. Enjoy!

What the hell happened here??????????? A solid 50cm vertical growth this week!!!!!!!!!! I thought the weird split this plant had a few weeks ago would be the talking point of this plant not her epic height!! I have bent over her main cola now because of headroom issues. First watering with 6-12-36 powder mixed at 1g/Litre

~MERINGUE by DUTCH PASSION~ Well friends, here we go on another 'canna-venture' together! The grow room has had a complete remodel and some upgrades done to it including brand spanking new 4x8 and 4x4 tents and a Trolmaster Hydro X controller along with a new Control Panel. This strain by Dutch Passion is one of my all time favorite strains that I've cultivated previously with phenomenal results so I'm looking forward to seeing what this girl has to offer when she's grown to her full potential! I'm going to things a bit different this time around. I have a brand spanking new AC Infinity 4x4 tent and was just given one of HLG's newest lights for 2022, The Blackbird! I've got this 600w monster hooked up to my Trolmaster Hydro X Controller so I've got full control over timing, dimming and Sunrise/Sunset. This beauty is going to annihilate the 4x4 for sure! 😎👍 I'm going to grow her all by herself and veg her for around 70-90 days after witch I'll install a trellis net in the tent and spread her out. Once she's recovered from her 'net training' I'll flip her to 12/12 and hang on! 🤪 It's ALWAYS been a blast for me growing strains from Dutch Passion because their genetics are extremely stable which allow me to just concentrate on the essentials: Light, Environment, Water, Nutrients and possibly a bit of LST... not complicated, just basics like keeping a constant temperature and RH in the tent at a level that gives a good VPD, watering when almost dry and maintaining proper light levels according to their stage of growth and they REWARD you with some of the most EPIC cultivars you've ever grown! 👍👍👍 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~STRAIN INFORMATION**~ ~Unique USA genetics~ ~Very sweet aroma and fruity flavors~ ~Compact buds with one of the highest THC levels~ ~Quality of the flowers is top-notch with an amazing bag appeal~ Meringue has a very sweet aroma and fruity flavor Meringue is a hybrid indica/sativa strain with a complex fruity aroma that leans to the tangy side of the spectrum but a bit sweeter. It smells like oranges, mango and honey with some earthy, sour hints. Her aroma profile is also very pungent. Meringue is a connoisseur’s delight Meringue is a high-quality strain. She might not be the biggest overall yielder but the level of quality is definitely a reason to keep growing her again and again. Expect solid yields of stunning looking buds. Although the flowers can be a bit smaller, they are rock-hard and thus will still put down some weight on the scale. When handled well she will deliver you some of the most beautiful looking nuggets on the planet. The dark hues in the flowers and leaves makes the white layer of resin really pop out for an eye-catching bag appeal. Meringue is grown by crossing Wedding Cake x Animal Cookies. Wedding Cake, also known as Pink Cookies, is a USA cross of the famous Girl Scout Cookies and Cherry Pie. These 2 strains make for the intense sweet tangy taste of the variety. It is also noted for its extremely high THC content. Animal Cookies is another popular USA variety which is a child of the legendary GSC line and Fire OG. She is a clone-only variety that flowers in about 9 week and grows very dense and compact buds that can show some dark coloration in the flowers. This strain has a sweet and sour aroma with a strong body-effect that will suit the more experienced smoker. -The genetics used to create Meringue ensure the following characteristics- ~A sweet tangy aroma from the Wedding Cake ~The dense, compact and colored buds from the Animal Cookies ~High potency levels thanks to both the Wedding Cake and Animal Cookies genetics Meringue is top-notch variety with a high cannabinoid profile and an intensely sweet, pungent aroma. ~Meringue Effects~ Meringue is a crossing of 2 popular hybrid USA strains. She leans a bit more to the Indica side which is shown in the shorter flowering time and bud structure. The effect of the variety is quite euphoric with a powerful sense of well being and relaxation. When you smoke more during a short period of time you will be rewarded with a deep body stone which could give a couch-lock experience. Meringue feminized seeds vs Lemon Meringue strain Any fans of the USA Lemon Meringue variety will love the Dutch Passion Meringue. Both varieties share a THC rich high and a connoisseur flavor profile. However feminized seeds of the Dutch Passion Meringue are thought to produce frostier plants and a superior vaping experience. -The growth and flowering time of Meringue- We recommend a veg period of about 4-6 weeks for these feminized seeds. Meringue can have a bit of a slow start while showing some stretch during the latter part of the grow period. On the other hand, she doesn’t stretch a lot during flowering, so she can be a bit challenging to understand. Meringue can have quite an unusual growth pattern with leaves that have elongated stems and which are pointed upwards with some distance to the main stem. This requires the use of certain growing techniques, like leaf tucking, to make sure she receives sufficient light from top to bottom. Meringue stays fairly compact and within 3-4 weeks there is already a lot of resin on the flowers. After 6 weeks of flowering the buds start to show orange pistils, they seem to ripen quite fast. Luckily all plants show amazing resin production, making them very appealing to the eye. The flowering time is about 8 weeks. In combination with the recommended veg phase, it will take around 12-14 weeks from cannabis seed to harvest. The yield of the Meringue Meringue produces XL harvests of top-notch quality cannabis; between 400 and 500 grams per m2 is possible. The buds are really frosty and dense. Our expert advice: Meringue is the perfect strain for professional home growers or licensed producers looking for a variety with the highest possible resin levels. Buds are literally coated in layers of resin. We would recommend to look out for the plants which show the most hybrid leaf and plant structure. These are generally the biggest and best yielding phenotypes. Consider using a UV light during the last few weeks of flowering and notice how the trichome production goes into overdrive. If you’re looking for something truly unique with an amazing bag appeal then please look no further, Meringue is the strain you need! ~More info about Meringue Meringue isn’t the most straightforward plant to grow so she can be a bit challenging to understand. The thing that stands out the most is the slightly unusual growth pattern, therefore more leaf picking is necessary, otherwise the lower buds will not receive enough light. Because of the slightly larger internodal distance, buds don’t have the tendency to become really big, which could make her a bit more interesting for growers with higher humidity levels. There should be enough fresh air around these flowers though, because they become rock-hard. Buds are covered in trichomes, lab results showed all phenotypes were close to and above 20% THC, suited for hardcore smokers. ** Credit to Dutch Passion ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~THE SETUP~ ~Initially seed was lightly scuffed, then soaked for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Mars Hydro Heat Mat with Controller that was set to 78℉ where it stayed until a tap root emerged. ~Planted into Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph. ~Once roots emerged from the Jiffy Pellet she was transferred to a 1qt plastic pot. As she grows I'll be moving her into larger pots along the way up until she's in her 10g fabric pot. ~Grown in a 10g fabric pot filled with Mother Earth 70/30 Coco/Perlite medium and fed Dutch Pro nutrients throughout the entire grow with de-chlorinated water ph'd @ 6.2-6.8. ~19/5 light cycle for vegetation, then 12/12 to flower with supplemental UVA added during the last weeks of flower. Lights are controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. ~ Supplemental co2 provided throughout vegetation and flower - monitored and controlled by an AutoPilot APC8200 co2 controller. ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 12/1- I soaked the seed for 3 hours in 78℉ distilled water after which it was transferred to a moist paper towel laid out in a Jiffy Pellet plastic starter tray with lid. Underneath the tray was placed a Vivosun Heat Mat with Controller that was set to 78℉. After 30 hours she had not popped open yet so I soaked another seed for 3 hours and then into a paper towel and onto the heat mat it went. 12/3- This afternoon I checked and the seed had a root that was about 1/4 to 3/8" so at 5 pm I transferred it into a Jiffy Peat Pellet that was hydrated with distilled water warmed to 78℉ with a 7.0 ph using a tine off of a plastic fork as a 'mini trowel' to make a hole in the pellet and to gently cover the tap root, leaving only the seed head slightly exposed. This method accomplishes most of the initial work the seed has to do by eliminating having to orientate itself, push it's root down and head up. By the next morning she had her cotyledon leaves opened! 12/5- Well this is Day ONE for the Dutch Passion Meringue! I'll keep her in the covered/heated Jiffy tray until I see her roots beginning to emerge from the peat pellet, then I'll transfer her gently into her 2qt plastic starter pot to begin growing. 12/7- Today when I checked her, she had roots just starting to emerge from her pellet, so tomorrow I'll transfer her into her 'starter' pot. 😎💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow Strong! 💪😎🤙