chegou a quantum board

Adding some green gro flower finisher to her abs that should be it for the rest of her life. Little bit of a slow mover. Placed in the center of the light/tent for more intensity. Frost is decent Yield is decent Easy to grow Terps are candy with a piney after Probably 2 more weeks

I lost a couple of tbe past 2 weeks, I've been a little busy with normal life stuff, sorry about that 🙏. I have Transplanted this girl into a 10 liter pot And I have only topped her once, didn't start any training on this plant out of the 10 plants I have going on. Beautiful ak pheno, hope to grow her very bushy with many tops. Hope you enjoy guys!

So, my "Skunk" puppies are always curious to see what I am doing when I am gardening. They are mischievous and would destroy my plants if I didn't have a fence around them. Miss Skunk grew 4 inches this week! And my two new branches grew a lot, too. I took a picture of my hand behind one of the lateral growths. I think it is doing very well. They grew about 1 inch this week. I started nutrients this week.

To push the pest resistance test even further (so far, the plants have shown resilience against fungus gnats, thrips, and excessive humidity), it’s getting too risky to allow the gnats to continue affecting my roots. As a test, I sieved fine sand from my garden and spread it over the soil to eliminate the gnats' living space. I gave the plants a good watering before applying the sand, and now I’ll leave it like this for a week. By the end of the week, I plan to repot them anyway, so we’ll see if this method clears up the gnat problem.

Low humidity seems to be causing what looks like heat stress, apart from that they are growing at a phenomenal rate. Going to try and raise the light another inch but it’s already mounted pretty much to the top of the tent. I forgot how insane hydro growth is lol, next time I will be sure to flip them to 12/12 when they are a little smaller lol

En esta semana ya la poda apical quedo aplicada en ambas feminizadas y nuestra automática ya esta comenzando a sexar, por lo que dentro de un mes mas ya deberíamos tener lista o cosechada nuestra Gelato. Al final de la segunda semana de floración, agregaremos nuestra malla scrog y comenzaremos a distribuir nuestra ramos lo mas posible para obtener un mejor rendimiento de nuestra niñas y de ser posible, obtener al rededor de 6 o 10 puntas por planta.

Still Hot AF! We’re at 100F everyday. All except the jelly rancher seem fine with it. The banana mango isn’t bothered. It’s interesting the heat difference on strains. All were planted the same time July 24, for the first time high today will be 90! Not 100! Shooting up like rockets! July 27th - supercropped the banana mango and it’s crazy wide and like a huge solar array! It rained yesterday! Real, soaking, non-drought rain. The plants loved it…

This week has been alot better with managing the temps so that's was a good start, I have definitely seen some size on the buds since last week 😁 so I stripped alot of the fan leaves off now since the girls are in flush so should see even more size fro now until harvest, Happy Times Happy Growing 😁 🌿 STAY SAFE 😁

Two Ethos Mandarin Bubba grown from seed, ended up being completely different phenos. One is dark purple almost red and other was lime green.

I cant wait to try this strain i dint had any problems two times one led turned off and past a bit of time with only 200w wich equivalent of 4leds of 5

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

Day 38- 18/01/22 and we are now in flowering everything is looking good I’m still cutting down the plants from my last grow Afghan kush and once I’m done with that I’ll be moving everything that isn’t chemdawg into the HPS tent!! Day42 -22/01/22 looking good apart from the burnt tips in the hps tent now!!!

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

slowly but surely we sailing. only one feed with nutrients at start of week and a couple straight up water 🌱

Hey everyone :-). The last plants were also placed in the bloom chamber kammer. Everyone has made great progress this week 🙏🏻. There is not much to say about this week, I think videos and pictures say more like words 🙈😎. I wish you all a good start into the week :-) Stay healthy and let it grow 🙏🏻👍

Trics and terps for days! Bud medium sized.