The ORP probe is not calibrated and values are to be taken with a grain of salt. Values are average of the day. DATE - °C - RH% (Tent Temp/RH) 20240905 24.3 70.9 20240906 24.7 65.5 20240907 23.9 69.5 20240908 23.2 62.9 20240909 22.4 62.3 20240910 22.5 61.4 20240911 23.0 55.4 DATE - PH 20240905 5.91 20240906 5.85 20240907 6.04 20240908 5.75 20240909 5.85 20240910 5.88 20240911 5.79 DATE - ORP (mV) 20240905 61 20240906 41 20240907 66 20240908 82 20240909 30 20240910 18 20240911 18 DATE - EC(us/cm) 20240905 2209 20240906 2260 20240907 2218 20240908 2297 20240909 2200 20240910 2165 20240911 2202 DATE - CF 20240905 22.09 20240906 22.60 20240907 22.17 20240908 22.97 20240909 22.00 20240910 21.65 20240911 22.02 DATE - °C (Reservoir) 20240905 21.5 20240906 22.0 20240907 21.7 20240908 21.7 20240909 20.6 20240910 20.4 20240911 20.6

Another slow start to the week after transplanting from coco to DWC. The plant showed little signs of growth and just seemed to be in 'limbo' for afew days. She then picked up the pace and has been sprouting new hairy roots and new foliage up top each day! LST continues to keep her low and wide with alot of new growth now accumulating from the main stem that is exposed. Will be looking to up the nutes over the following week to encourage her back to regular feeding dosages.

All good

Plant looks well. Buds are beautiful. Smell is very good. Some leaves are turning yellow, I believe is normal, maybe a little bit early given that is only week 5 of flowering. But still, the plant looks very healthy.

Sorry I was away for a bit. Spilt a pint of beer and then a pint of water on my laptop and had to get it repaired. Lost everything on my SSD so tryna build back. We're now in the penultimate week, i'm using Dragon Force from Shogun for a final boost before I flush next week. I have added a dehumidifier into the mix. Had some issues initially with the reservoir filling up to quick and emptying it being a pain so I attached the pipe to drain water back into the oxypot. Unfortunately I connected it badly and it leaked into the tent creating a spicy situation. I managed to mop up the water and reconnect it so it now drains correctly into the oxypot. It seems to be working. I had it set to 50% these last few days and it reduced the RH from 70% to 51%. I've now set it to 40% to try and boost that last minute resin production. Got 4 clip on fans and the airflow relatively high to keep the air as fresh and dry as possible. Had some rot on the last crop, determined to not let that happen this time. I removed the second OHS plant because it was stunted and the 2nd Morpheus plant was so large she could use the space and has done nicely. The morpheus 2 is dominating the space but has absolute monster colas so I forgive her. There's this mutant bud pictured. Wasn;t sure what was going on so after doing some research it seems it's either polyploidism or fasciation. I'm not exactly sure how to tell the difference but it looks cool as hell and I've excited to harvest, trim and smoke that badboi.

Almost done💐💐

Defoliated the inner leaves and noticed her stretch was inevitable. This could be her last week in veg mode as her stretch is extreme and I would like to avoid breaking when shows up the buds.

The ladies are still doing great and stacking very nicely! The leaves do look very very dark green with slight tip burns, so I doses down the nutrients slightly from 1100+ to 950 ppm! The grow light makes the leaves look more light green than they actually are (check the night shots) both pheno’s smell like a nice and strong gelato (vanilla/gas) 💪🏻

More heavy defoliation more pony railing tops as they grow out . Before there were 11 tops tied now there were 18 tops tied . Overall she probably looks the exact same as 4 weeks ago but she has been doing a lot of leg work for the the grow to come . I’m still waiting to see these top dressed nutes start becoming available to her . I’m also curious to see what response , if any, she gives to the worm castings I topped dressed her with . She’ll be going to a 6 gal pot in about 3-3&1/2 once it’s time to feed her again . At the exact End of this week I’ve just untied all her tops . Give us a like .

Utopia Haze is a rare heavily sativa dominant hybrid (90% sativa/10% indica) strain created through back crossing Brazilian Sativa strains. This tasty little bud took home 1st Place for Best Sativa in the 2008 High Times’ Cannabis Cup and for good reason – with its potent 18-22% average THC level and long lasting cerebral effects, Utopia Haze is one powerhouse smoke. The Utopia Haze high comes on soon after you finish your first toke, hitting you with a strong cerebral lift that infuses you with a sense of hazy relaxation. Type: Feminised/Photoperiod Cultivation: Indoor/Outdoor Flowering Time (days): 70-75 Indoor Yield (g): Up to 650 Feminised Outdoor Harvest Month: October Feminised Outdoor Harvest Month Week: 3rd-4th week Aroma: Citrus, Woody, Pungent, Mint Effect: Cerebral Lift, Hazy Relaxation, Sleepy Welcome Everyone to the Final Entry of my Utopia Haze Grow ! There is so much to discuss ! I have been extremely busy as of late trying to get this Harvest together, but i am happy to have it here for you now ! I Seriously under estimated the amount of time, help from others, and my own necessary skills to pull this off.. and i still kind of screwed it up lol ! But its worth noting i have never actually done this before and trying to document it during....was extremely hard. It is next to impossible to work an iPhone with rubber gloves on ! First I want to discuss everything step by step so before you jump straight into the comments on how the end product is so small in "quantity" Rest assured i am happy with its"quality"...and thats all that matters to me because Life is a journey not a destination! and i have learned so much from this grow that I couldn't be any happy even if i messed some things up :) But at the very least I hope you read through this entry in its entirety with an open mind and focus more on the process, rather than just the outcome! I ran out of Ice & i was only able to wash three times..(normally I've heard you should go sometimes 5-6 washes) Preparation is Key & things will be much better next round :) Photos 1-22 These are pretty self explanatory but for those of you just tuning in now.. this is what happens to a very happy plant when you don't have the necessary tools to monitor key components of growing cannabis.. Ph, as well as EC levels play a very key role in the outcome of your grow lol that being said I was just able to save this plant by purchasing both tools but that doesn't mean the plant didn't suffer because of the prior events.. This was a Huge reason behind me choosing to turn this harvest into what i would consider "Solventless Hash Rosin" from "Ice water extracted Bubble hash". Pictures 23 The idea here is the process of using "fresh Frozen Cannabis" this has been discussed many a time online on such sites as instagram and here on grow diaries as well.. I personally have Never tried the process so i decided to try it out and make a judgement for myself.. Video 24 The Cannabis has now been in the freezer for 72 hours making it very well frozen.. as you can tell i struggled getting it all into the 25u Screen Wash Bag. One thing of note i would do differently is i will de-stem my next batch as i also believe this played a part in the amount of plant matter that escaped through the sieves. Photo/Video's 25-28 The idea here is "ice water Seiving" & especially with the bags that I am using here that are only have screen material on the bottom portion of the bag it is very important to have spaces in-between the screens to allow the water to pass directly through the screens into the bottom bucket with the least amount of resistance.. because the hash is so extremely temperature dependant if it gets warm on the side of the bag.. it will stick there and not make it to the bottom to become use able product.. 29 You do not need to use as much Ice as i used here lol... the idea is to keep everything very cold..i certainly achieved that but at the sacrifice of using so much that i ended up grinding product and producing "contaminants" but in the end they are just plant matter that i would be smoking when i rolled up my joint either way so.. I'm not super disappointed.. But it should be noted that what you want to achieve here is a Layering effect where you have the wash bag between two small layers of ice while the "water current" washes the Trichomes away allowing them to be separated by the screens setup below :) Before Starting the machine you should allow some time (i.e.;10-12minutes pre soak to allow the product to become saturated) before the first cycle. By video 32 I have just ran out of ice lol.. Video 33-34 Here I have a tip for you.. to separate the screens that you sieve through.. cut 5 gallon buckets to stretch them across nice and tight.. it'll make scooping your Bubble that much easier ! i learned this from the many "Frenchy" videos I have watched :) Picture 35 Here in lays the problem for most people.. drying your hash without loosing vast amounts of "Terpenes" whilst also stay ever vigilant against mold ! Thanks to all those videos I've watched on youtube.. id like to think this was one of my most successful parts of this process.. Things to Note; Terpenes start to seriously evaporate at temperatures 68F or 20C you need to stay as cold as possible whilst bringing the Relative Humidity in the space down into the 40-30% to stay away from that nasty mold ! I used my cold storage room in the basement.. with a dehumidifier running to keep the space at 45% RH & staying at a constant 15c. All while spreading the hash as thin as possible across parchment paper, on top of the white screens with a fan moving air across both sides of the paper. Pictures 36-38 These are some macros i took in the middle of my drying session I fell in love with the colour. Yes i know the black spots are plant material but they will get caught when i bag the hash & squish the oil out. Thing to Note; at this stage it is important to ensure you 'micro plane" the hash down as fine as you can whilst staying weary of the temperature... any "chunks" will hold pockets of moisture.. that lead to potential problems..ie; mold ... Picture/Video 39-41 Successfully planed bubble hash ready to be bagged and Squished ! Picture 42 Ive decided to follow Pedro.. from Pedros Grow Room and double bag to be on the safe side so i don't have any blow outs. So thats One 25u bag inside one 160u bag ! :) Pictures 43 This is almost 3 grams of the bubble hash from above, already melting in the bag.. this is where i ran into trouble again lol things started getting to warm in the house and i was only able to get one of the three squish's i did on video :( things started getting sticky. Picture 44 This is basically just a photo of the equipment I'm using; 3x5 LowTemp Cage in the frame I built myself, with a 20Ton bottle jack. Something to note here is this is an older Lowtemp model with only a single heating zone which is which i have it closed here heating Both sides of the press :) As well as the importance of having adequate pressure on your plates.. my rig is very overkill for the size of hash bags..lol Video 45 Here is the lovely press video.. its didn't quite work the way i wanted either lol my directional folding wasn't quite tight enough for a big "drip" :) &the Press was set to 65°c Photo's 46-50 are pretty self explanatory :) I had a blow out.. but still managed to pull an 80% return from the hash once squished...& yes it tasted amazing :) Was it worth it in the end... that could be debated.. for some..i understand..its not your thing, but for those of us that are interested in making our own concentrates.. free from Solvents... I wouldn't make it any other way :) If even ONE of you reading this diary finds it helpful to reference for ANYTHING.....even if its "what not to do" ill consider it a success ! Thanks again for tagging along on this garden adventure.. its been one heck of a journey ! Much Love from B.C. Canada, Until Next time, Cariboo

Hello everyone 😎 Week 2 of flower for the Banana Purple Punch auto from Fast Buds 💥 She grew fast with a beautiful green color,for the nutrient 4ml/L terra bloom & 1ml/L power buds from Plagron Mars Hydro SP-6500 60% Have a nice day 😋

D88 - She stretched a lot and I did not intervene with her stretching that much. She doesn't even need any LST since the beginning of flowering. I am just defoliating her a little bit by taking out the leaves blocking the direct light and that's it. Pollination - Previously I harvested some male pollen from a female plant by spraying colloidal silver. This plant itself was a breed of White Rhino X AK47 (White47 I call it). Now I pollinate White 47 with AK47 again at the third week and it will have time to mature her seeds I hope. I marked the branches and turned off-the fan nearly for a day to prevent over-pollination. I took a video in case you want to create your own seeds!

Big and sticky buds, strong smell, my favorite strain😍

Another week closer.... I know I said it before but these girls have been a pleasure to grow...they are 23 days into budding and pushing out like crazy blowing up and stacking up..going to be some full girls. Nothing to really say everything is dialed in perfect, this week it was very hot out so my room got a little hotter... but no big deal the girls really didn't mind... Until next week.... smoke a fatty, help out your fellow grower...

Que pasa familia, como podéis comprobar tienen un pequeño exceso de nutrientes, algunas hojas doblan hacia abajo, no obstante , esta variedad está empezando apestar con un olor bastante peculiar. Es una variedad que como te descuides también crece bastante, controlamos los parámetros de la temperatura y la humedad en lo establecido, 0 problemas en ese aspecto. Veremos cómo reaccionas esta próxima semana al overdrive y si notamos ya las diferencias.

Harvested at day 116, had some problems of high inflow pH at week 11 that has a little decreased the final harvest, in my opinion. But I'm proud of my job cause that was the ONLY little problem in the entire grow. Keep Growing and learning everyday 🙏🏻💚🤞🏼🕉️

Think these will be done by end of week 8 possibly, adding UV + IR for terpes and pushing for an earlier finish! 🍋

Welcome Back!💚 Die vierte Blütewoche ist ins Land gezogen und die Blütenausbildung nimmt weiter an Fahrt auf. Außerdem bekommen die Blütenstände vermutlich eine Dichte und kompakte Form. Es entwickelt sich ein süßes fruchtiges Aroma, welches sich aber noch nicht auf den beschriebenen Geschmack zuschreiben lässt. Der Stretch hat nochmal etwas an Höhe hergegeben, allerdings im Rahmen des erwarten. Die Werte im Zelt sind durch die erhöhte Luftfeuchtigkeit von draußen nochmal etwas anders. Aber super im Rahmen: ——————— 🌞 Temp: 24°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,91 kPa 😎PPFD: 830 mqm ——————— Stay Tuned! 💚

Nothing special happening no over feed no over/under watering. Plants look like they enjoy the environment